• Journal of the Korean institute of surface engineering
• /
• v.16 no.4
• /
• pp.199-214
• /
• 1983

Up to this date, numerous methods of analysis of electroplating solutions are published. Some, however, need lots of works before reaching final results, or require high technique and special instruments, and also some are unaccurate due to unclearnes of end point. Like our undevelope countries, technicians of electoplating shops are most high school gradutes or under, and have not much knowledge on chemistry. Furthermore, those technicians have to control their plating solutions by themselves without having enough analytical laboratory equiIJment. Therefore, in this paper the simplest, besides accurate method is investigated after comparing nu.merous methods published. Among the methods of 'copper determinations from acid and alkaline copper plating baths, EDT A titration method are chosen, due to these methods are the simplest and fastest for the evaluation of metal content, without requiring any special instrument. For acid copper solutions, chelate titrations were accurate enough. Since the end point of titration of chelate method is variable according to the kind of .indicators androther metal's coexsistence as well as solution comIJonent, many difficulties were encountered from cyanide' copper, on the contrary of acid copper bath. PAN, PV, and MX indicators were tried, but it is found that MX is the best. In cyanide solution, due to cyanide is the masking reagent, elimination of this component is essential, and finally found that elimination eN- by precipitation with AgN03 solution was the simplest and the most accurate way among others. This method was very accurate for the new plating solutions even coexistence with organic brightners. However used solutions for long months running have to be predetermined the accurate copper value by thiosulfate method from time to time, before chelate titration by means of AgN03 precipitation. Always some constant deviatioJ;ls will be seen according to the solutions nature. Therefore those deviation values have to be compensated each time.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.4
• /
• pp.77-86
• /
• 2020

Persulfate-based advanced oxidation processes (AOPs) can oxidize various organic pollutants. In this study, persulfate/Fe(II) system was utilized in phenol removal, and the effect of various organic and inorganic chelators on Fe(II)-medicated persulfate activation was investigated. The feasibility of persulfate/Fe(II)/chelator in cleanup of phenol-contaminated sediment was confirmed through toxicity assessment. In persulfate/Fe(II) conditions, the rate and extent of phenol removal increased in proportion to persulfate concentration. In chelator injection condition, the rate of phenol removal was inversely proportional to chelator concentration when it was injected above optimum ratio. Thiosulfate showed greater chelation tendency with persulfate than citrate and interfered with persulfate access to Fe(II), making the latter a more suitable chelator for enhancing persulfate activation. In contaminated clay sediment condition, 100% phenol removal was obtained within an hour without chelator, with the removal rate increased up to four times as compared to the rate with chelator addition. A clay sediment toxicity assessment at persulfate:Fe(II):phenol 20:10:1 ratio indicated 71.3% toxicity reduction with 100% phenol removal efficiency. Therefore, persulfate/Fe(II) system demonstrated its potential utility in toxicity reduction and cleanup of organic contaminants in sediments.

• Korean Journal of Plant Resources
• /
• v.32 no.4
• /
• pp.312-317
• /
• 2019

This study was conducted with the purpose of examining the suitability of Euphorbia jolkinii Boiss. as cut flower, so that it may be introduced as a new ornamental crop. For this purpose, effect of various holding solutions on vase solution uptake rate, vase life, and relative fresh weight of cut flowering branches of E. jolkinii was examined. After harvest, cut branches were treated with 10, 50, and $100mg{\cdot}L^{-1}$ of 8-hydroxyquinoline sulfate (8-HQS), 0.1 and 0.2 mM of silver thiosulfate (STS), Chrysal, and Floralife. The cut branches of E. jolkinii were placed under the environmental conditions maintained at air temperature of $22.6^{\circ}C$, relative humidity of 45%, and 9/15h photoperiod that was controlled using fluorescent lamps (light intensity of $9.89{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$). A holding solution containing $10mg{\cdot}L^{-1}$ 8-HQS was found to be significantly effective for vase solution uptake rate compared to control, $50mg{\cdot}L^{-1}$ 8-HQS, and $100mg{\cdot}L^{-1}$ 8-HQS treatments. However, no significant difference was found in vase life between the branches treated with $10mg{\cdot}L^{-1}$ 8-HQS holding solution and branches of the control group. Increasing holding solution concentrations of STS was found to have negative effect on the vase life of cut E. jolkinii branches. Relative fresh weight of cut E. jolkinii branches were significantly decreased by two commercial holding solutions, Chrysal and Floralife. It is expected that these results would aid further studies on utilization of E. jolkinii as cut flower crop.

• Korean Journal of Plant Tissue Culture
• /
• v.22 no.5
• /
• pp.267-271
• /
• 1995

To improve regeneration efficiency of Brassica campestris ssp. pekinensis (chinese cabbage) in vitro, the effect of ehtylene inhibitors [AgNO$_3$ and silver thiosulfate (STS)] and optimal age of explantse were investigated. On the effect of ethylene inhibitors either 100 $\mu$M of AgNO$_3$ or 5 $\mu$M of STS enhanced shoot regeneration from cotyledons when it was added in basal shoot induction media(MS salts, B5 vitamine, sucrose 2%, BA 2.0mg/L, NAA 1.0mg/L). But at higher concentrations, AgNO$_3$ induced abnormal shoots, and STS greatly reduced regeneration frequency. On the other hand, the maximum regeneration rate was obtained from the cotyledons taken from 3-day old seedlings. However there was no distinctive effect among the containers used for cultivation. The most optimal condition of root induction was a minimal Murashige and Skoog media containing 0.1 mg/L NAA. In order to induce bolting and flowering from in vitro regenerated chinese cabbage, the plant were healed at 4$^{\circ}C$ for weeks in a cold chamber. When they were planted in pots, the plane produced phenotipically normal flowers and seeds. The overall results suggest that ethylene inhibitors promote regeneration of shoot from cotyledons of chinese cabbage without alleviating fertility.

• Food Science and Preservation
• /
• v.17 no.1
• /
• pp.91-99
• /
• 2010

Extraction and bleaching of citric acid- and pepsin-soluble collagens (ASC and PSC, respectively) from shark (Isurus oxyrinchus) skin and muscle were investigated. The optimal sodium hydroxide concentration for extraction was 0.3 M and the optimal treatment time for removal of foreign material was 9 h. The optimal sodium hypochlorite level for bleaching of shark skin was 0.48% (w/v), and sodium hypochlorite was a better bleaching agent than acetone, hydrogen peroxide (10%, v/v), sodium sulfite (0.48%, w/v), sodium thiosulfate (0.48%, w/v), or sodium metabisulfite (0.48%, w/v). Optimal citric acid concentration and extraction time for ASC were 0.3 M and 72 h, respectively, whereas optimal conditions for extraction of PSC were treatment with 0.1 M citric acid containing 0.1% (w/v) pepsin for 24 h. Protein contents in ASSC (acid-soluble shark skin collagen), ASMC (acid-soluble shark meat collagen), PSSC (pepsin-soluble shark skin collagen), and PSMC (pepsin-soluble shark meat collagen) were 88.66%, 83.09%, 90.33%, and 84.81% (on a dry weight basis), respectively, similar to that of commercial marine collagen (88.86%). Net collagen contents of ASSC, ASMC, PSSC, and PSMC, calculated from hydroxyproline levels, were 70.31%, 25.70%, 83.09%, and 32.94%, respectively. The yields of freeze-dried ASSC, ASMC, PSSC,and PSMC were 57.22%, 53.85%, 23.28%, and 20.61%.

• Korean Journal of Environmental Biology
• /
• v.34 no.2
• /
• pp.116-123
• /
• 2016

The ecotoxicity tests for metal plating wastewater were conducted using Daphnia magna (D. magna) and Euglena agilis (E. agilis). Evaluation for sources of toxicity was performed by 1) Correlation analysis between the concentration of individual metals in the metal plating wastewater and the toxic effects on D. magna, 2) Toxicant identification evaluation methods including graduated pH method, EDTA procedure and sodium thiosulfate procedure, 3) Comparison of toxic effect value ($EC_{50}$ or $LC_{50}$) of individual metal on D. magna and it's concentration in the metal plating wastewater. To evaluate the possibility of E. agilis, a Korean domestic organism, as a test model organism for metal plating waste water, E. agilis toxicity test was also assessed using on-line euglena ecotoxicity system (E-Tox system). Based on toxicant characterization test using D. magna, it was expected that SS, oxidants and heavy metals are responsible for toxicity of metal plating waste water. Especially Cu, Hg, and Ag were the major cationic metals that caused toxicity. E. agilis is less sensitive than D. magna based on the $EC_{50}$ value however it shows prompt response to toxic test substances. E. agilis shows even a significant effect on the cell swimming velocity within 2 min to toxic metal plating wastewater. Our study demonstrates that E. agilis test can be a putative ecotoxicity test for assessing the quality of metal plating waste water.

• Journal of Food Hygiene and Safety
• /
• v.33 no.5
• /
• pp.412-415
• /
• 2018

The objective of this study was to establish a quantitative count method of Vibrio vulnificus cells. Plate count method is often used to count the number of V. vulnificus cells using thiosulfate citrate bile salts sucrose (TCBS) agar plate. However, this method is unsuitable for counting V. vulnificus cells due to growth inhibition and cell injuries in TCBS medium. In this study, we suggested a most probable number-polymerase chain reaction (MPN-PCR) method using alkaline peptone water medium for the quantification of V. vulnificus. This MPN-PCR method showed 2 log higher cell number than TCBS agar plate method. Similar results were also found in the control using, Luria-Bertani agar containing 2% NaCl. Thus, this MPN-PCR method can be used a sensitive method for quantitative count of viable V. vulnificus cells in fish and shellfish samples.

• Resources Recycling
• /
• v.26 no.1
• /
• pp.51-58
• /
• 2017

The present study to develop a process for extracting nitric acid and gold from aqua regia leach solution using TBP(tributyl phosphate) was conducted. The pure aqua regia was used to investigate the extractive behavior of nitric acid depending on the concentration of extractant, concentration ratio of nitric and hydrochloric acid. The extraction rate of nitric acid and gold from the gold bearing aqua regia was also examined. The theoretical extraction number was verified by counter current using the number of operations and the phase ratio obtained from McCabe-Thiele diagram. Stripping experiments were carried out for continuous recovery of nitric acid and gold in loaded organic. Considering the effect of extraction acid and gold, the simulation showed that greater than 99.9% extraction of $103.0mg{\cdot}L^{-1}$ gold and 98.0% of $151.2g{\cdot}L^{-1}$ nitric acid could be attained in a two and three-stage counter-current extraction at an O/A phase ratio of 1:0.85. Distilled water and sodium thiosulfate were used as the nitric acid and gold stripping solution. The stripping rates were 99.5% and 92.0%, respectively. The study revealed that the recovery of nitric acid and gold from gold bearing aqua regia was a plausible approach through simultaneous extraction and continuous stripping of nitric acid and gold.

• Korean Journal of Microbiology
• /
• v.34 no.4
• /
• pp.200-206
• /
• 1998

The distributions and characteristics of bacteria on the deodorizing biofilters were studied as a part of biofiltration research for odor gas removal. The odor gas originated from a currently operating nightsoil treatment plant were mainly nitrogenous compounds of ammonia and amines. The filter media were consisted various ratio of pine bark, nightsoil cast and compost, and were sampled before and after operation of 153 days. Before operation, the level of bacteria on nitrification agar medium, nutrient agar medium and thiosulfate agar medium were around $10^7{\sim}10^8cfu/g$ media. After operation, the level decreased but still high as $10^5{\sim}10^7cfu/g$ media. The bacteria from reactors before and after operations were either rod or coccus after growth on nitrification agar media. The 45 isolated heterotrophic bacteria were further characterized and Pseudomonas, Bacillus, Flavobacterium, Alcaligenes were dominant genera. Genus Alcaligenes was particularly dominant when the isolates were incubated on nitrification agar media first and then transfered to nutrient media. The portion of Alcaligenes in the biofilter increased after operation, and was higher in the media contained nightsoil cast, which showed better treatment than the media with pine bark only.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.252-260
• /
• 2009

Rice is the most important cereal crop not only in supplying the basic staple food for more than half of the world's population but also as a model plant for functional genomic studies of monocotyledons. Although rice transformation method using A. tumefaciens has already been widely used to generate transgenic plants, the transformation rate is still low in most Korean elite cultivars. We made several modifications of the standard protocol especially in the co-cultivation step to improve the efficiency of the rice transformation. The co-culture medium was modified by the addition of three antioxidant compounds (10.5 mg/L L-cysteine, 1 mM sodium thiosulfate, 1 mM dithiothreitol) and of Agrobacterium growth-inhibiting agent (5 mg/L silver nitrate). Co-cultivation temperature ($23.5^{\circ}C$ for 1 day, $26.5^{\circ}C$ for 6 days) and duration (7 days) were also changed. The plasmid of pMJC-GB-GUS carrying the GUS reporter gene and the bar gene as the selectable marker was used to evaluate the efficiency of the transformation. After co-cultivation, a high level of GUS gene expression was observed in calli treated with the modified method. It is likely that those newly added compounds helped to minimize the damage due to oxidative bursts during plant cell-Agrobacterium interaction and to prevent necrosis of rice cells. And the transformation rate under the modified method was also remarkably increased approximately 8-fold in Heungnambyeo and 2-fold in Ilmibyeo as compared to the corresponding standard method. Furthermore, we could produce the transgenic plants stably from Ilpumbyeo which is a high-quality rice but its transformation rate is extremely low. Transformation and the copy number of transgenes were confirmed by PCR, bar strip and Southern blot analysis. The improved method would attribute reducing the effort and the time required to produce a large number of transgenic rice plants.