• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.206-208
• /
• 1996

Thin films of magnesium oxide(MgO) were deposited on glass substrates by RF magnetron sputtering method. The characteristics of MgO thin films were analyzed as a function of various deposition conditions such as substrate temperature, substrate self-bias, input power and pressure. As the substrate temperature and bias voltage were increased, the grain size of MgO thin film increased. XRD peaks of (111) and (222) direction became dominant, as the substrate bias voltage increases and temperature decreases.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.432-433
• /
• 2005

In this study, Al doped ZnO(AZO) thin film were prepared on glass substrates by FTS(Facing Targets Sputtering) system. We investigated electrical, optical and structural properties of AZO thin film with the substrate temperature of the R.T, $100^{\circ}C$, $200^{\circ}C$ and the post-annealing. The crystallinity of AZO thin film was increased with increasing the substrate temperature and post-annealing temperature $600^{\circ}C$. The remarkable change of the resistivity with the substrate temperature didn't found and the resistivity with post-annealing was increased slightly.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3A
• /
• pp.249-255
• /
• 1999

Deposition characteristics of Cu thin films using Ar carrier gas and $H_2$ processing gas at various working pressures and substrate temperatures were investigated. Also, effects of $H_2$ pretreatment using plasma at $200^{\circ}C$ of substrate temperature and 0.6 Torr of chamber pressure were stdied. Cu thin films were deposited on TiN/Si substrate at working pressure of 0.5~1.5 Torr, substrate temperatures of 140~$240^{\circ}C$ with (hface)Cu(tmvs). Substrates were pretreated by $H_2$ plasma, and Cu films deposited in situ using twofold shower head. The purity, electrical resistivity, thickness, surface morphology, optical properties of the deposited Cu films were measured b the AES, four point probe, stylus profiler, SEM,. and the uv-visible spectrophotometer. This study suggests that $H_2$ plasma is an effective method for enhancing deposition rate and for producing high quality copper thin films.

• Journal of Sensor Science and Technology
• /
• v.13 no.3
• /
• pp.252-257
• /
• 2004

$Y_{2}O_{3}:Eu^{3+}$ thin films have been grown on $Al_{2}O_{3}$(0001) substrates by a pulsed laser deposition (PLD) method. The phosphor thin films were deposited at a substrate temperature of 500, 600, and $700^{\circ}C$ under the oxygen pressure of 100, 200, and 300 mTorr. The crystallinity, surface roughness and photoluminescence of the films are highly dependent on the substrate temperature and oxygen pressure. The films grown on $Al_{2}O_{3}$(0001) substrate even under the different substrate temperatures and oxygen pressures exhibited (222) preferred orientation. The luminescent spectra exhibited strong luminescence of ${^{5}D_{0}}-{^{7}F_{2}}$ transition within $Eu^{+3}$ peaking at 612 nm. The crystallinity and luminescence intensity of the films have been improved as the substrate temperature increasing. With increase of oxygen pressure from 50 to 300 mTorr, the crystallinity of the films has been uniformly decreased. The photoluminescence intensity and surface roughness have similar behaviors as a function of oxygen pressure. At 200 mTorr, both photoluminescence intensity and surface roughness show a maximum.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.8
• /
• pp.505-509
• /
• 2016

We have investigated the characteristics of amorphous silicon (a-Si) thin-film solar cell by inserting barrier layer. The conversion efficiency of a-Si thin-film solar cells on graphite substrate shows nearly zero because of the surface roughness of the graphite substrate. To enhance the performance of solar cells, the surface morphology of the back side were modified by changing the barrier layer on graphite. The surface roughness of graphite substrate with the barrier layer grown by plasma enhanced chemical vapor deposition (PECVD) reduced from ~2 um to ~75 nm. In this study, the combination of the barrier layer on graphite substrate is important to increase solar cell efficiency. We achieved ~ 7.8% cell efficiency for an a-Si thin-film solar cell on graphite substrate with SiNx/SiOx stack barrier layer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.9
• /
• pp.711-717
• /
• 1998

BST(70/30) and BST(50/50) thin films were prepared by Sol-Gel method and studied about the microstructural and dielectric properties with Pt and ITO bottom electrodes. The stock solution was synthesized and spin coated on the Pt/Ti$SiO_2$/Si and Indium Tin Oxide(ITO)/ glass substrate. the coated films were dries at 350$^{\circ}C$ for 10 minutes and annealed at $750^{\circ}C$ for 1 hour for the crystallization. The thin films coated on ITO substrate were crystallized easily and the packing density and roughness of surface were better that those of films coated on Pt substrates. In the BST(50/50) composition the structural properties were similar to the BST(70/30) composition and grain size were decreased with increasing the contents of Sr. The dielectric constant was higher in the BST(50/50) composition compared with the BST(70/30) composition. Using the ITO substrate, the dielectric constant was higher than the Pt substrate while the dielectric loss was showed a reverse trend. The dielectric constant with and increase of temperature was decreased slowly.

• Korean Journal of Materials Research
• /
• v.14 no.12
• /
• pp.840-845
• /
• 2004

Tin dioxide ($SnO_2$) thin films were prepared on Si(100) substrate by PE-ALD using the $DBDTA((CH_{3}CO_2)_{2}Sn[(CH_2)_{3}CH_3]_2)$ Precursor. The properties were studied as a function of source temperature, substrate temperature, and purging time. Scanning probe microscopic images at the source temperature $50^{\circ}C$ and the substrate temperature $300^{\circ}C$ shows lower roughness than those $40/60^{\circ}C$ source and $200/400^{\circ}C$ substrate temperature samples. The purging time for optimum process was 8sec and the deposition rate was about 1 nm per 10 cycles. The conductance of $SnO_2$ thin film showed a constant region in the range of $200^{\circ}C\;to\;500^{\circ}C$. The thin films deposited for 200 cycle show a better sensitivity to CO gas.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.3
• /
• pp.97-101
• /
• 2005

ZnO thin films were grown at different plume-substrate (P-S) angles of 90$^{\circ}$ (on-axis PLD), 45$^{\circ}$ and 0$^{\circ}$ (off-axis PLD) using pulsed laser deposition. The x-ray diffraction pattern exhibiting a dominant (002) and a minor (101) peak of ZnO indicates all films were strongly c-axis oriented. By observing of (002) peak, the FWHMs of ZnO (002) peaks decreased and c-axis lattice constant approached the value of bulk ZnO as P-S angle decreased. Whereas the carrier concentration of ZnO thin film deposited at P-S angle of 90$^{\circ}$ was ~ 10$^{19}$ /cm$^{3}$, the Hall measurement of ZnO thin films deposited at P-S angles of 0$^{\circ}$ and 45$^{\circ}$ was impossible due to the decrease of the carrier concentration by the improvement of stoichiometry and crystalline quality. By decreasing P-S angle, the grain size of the films and the UV intensity investigated by photoluminescence (PL) increased and UV peak position showed red shift. The improvement of properties in ZnO thin films deposited by off-axis technique was due to the decrease of repulsive force between a substrate and the particle in plume and the relaxation of supersaturation.

• Journal of the Korean Ceramic Society
• /
• v.37 no.7
• /
• pp.665-672
• /
• 2000

The ferroelectric YMnO3 thin films were prepared by MOD(metal-organic decomposition) method with Y- and Mn-acetylacetonate as starting materials. Thin films were grown on various substrates by spin-coating technique. The crystalline phases of the thin films were identified by X-ray diffractometer as a function of heat-treatment temperature, pH of coating solution and substrate. In addition, the effect of Mn/Y molar ratio(0.8~1.2) on the formation of hexagonal-YMnO3 phase was investigated. In forming highly c-axisoriented hexagonal-YMnO3 single phase, the Pt coated Si substrate was more effective than the bare Si substrate, and the optimum heat-treatment condition was at 82$0^{\circ}C$ for 30 min. Higher Mn/Y molar ratio within 0.8~1.2 and pH of YMnO3 precursor solution within 0.5~2.5 favored formation of ferroelectric hexagonal phase rather than orthorhombic phase. Leakage current density of the hexagonal-YMnO3 thin film formed on Pt(111)/TiO2/SiO2/Si substrate was low enough as 0.4~4.0$\times$10-8(A/$\textrm{cm}^2$) at 5 V and its remanent polarization(Pr), calculated from the P-E hysteresis loop, was 3 nC/$\textrm{cm}^2$.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.1
• /
• pp.33-36
• /
• 2010

$MgF_2$ is a current material used for optical applications in the ultraviolet and deep ultraviolet range. Process variables for manufacturing $MgF_2$ thin film were established in order to clarify the optimum conditions for the growth of the thin film, dependant upon the process conditions, and then by changing a number of the vapor deposition conditions, substrate temperatures, and heat treatment conditions, the structural and optical characteristics were measured. Then, optimum process variables were thus derived. Nevertheless, modern applications still require improvement in the optical and structural quality of the deposited layers. In the present work, in order to understand the composition and microstructure of $MgF_2$, single layers grown on a slide glass substrate using an Electron beam Evaporator (KV-660), were analyzed and compared. The surface substrate temperature, having an effect on the quality of the thin film, was changed from $200^{\circ}C$ to $350^{\circ}C$ at intervals of $50^{\circ}C$. The heat treatment temperature, which also has an effect on the thin film, was changed from $200^{\circ}C$ to $400^{\circ}C$ at intervals of $50^{\circ}C$. The physical properties of the thin film were investigated at various fabrication conditions, such as the substrate temperature, the heat treatment temperature, and the heat treatment time, by X-ray diffraction, and field emission-scanning electron microscopy.