• Journal of Fashion Business
• /
• v.5 no.3
• /
• pp.63-71
• /
• 2001

The symbol of the sacred tree represents the world tree. They were influenced by Tree worship in Northern mounted nomadic groups, and the first is quite obvious, that the sacred tree is a palm tree. The Assyrian sacred tree possesses characteristics, making the tree iconographic and rather artificial. The tree typically has a thin trunk arranged in two or three tiers. Each tier is separated by horizontal plates or bands. The top of the tree is crowned with a palmette form. Wavy streamers emanate from the tree abd terminate in palmettes in a criss cross fashion. The central trunk is topped with a palmette and surrounded the trunk with palmettes emphasizing a link to date trees. The number of branches on the tree is limited, and there are usually seven, fifteen or thirty branches. The connection of these numbers with those of the week, and of the lunar wax and wane is so obvious. The branches on the tree may have indeed represented a calender of some sort. Mainly based on the excavated tomb articles of the three kingdoms and referred to Chinese and Japanese ones, Sacred Tree pattern showed that was lightly influenced by the times and area, but was slowly changed and developed to different types through those each ages generally. The Sacred Tree type was three part in according to the wavy streamers emanate from the tree abd, Sacred tree type I, Sacred tree type II, Sacred tree type III[the Mountain(; 山)-typed piled up Sacred Tree].

• Structural Engineering and Mechanics
• /
• v.39 no.4
• /
• pp.499-520
• /
• 2011

The effectiveness of a technique for the repair of reinforced concrete members in combination with a technique for the repair of masonry walls of infilled frames, damaged due to cyclic loading, is experimentally investigated. Three single - story, one - bay, 1/3 - scale frame specimens are tested under cyclic horizontal loading, up to a drift level of 4%. One bare frame and two infilled frames with weak and strong infills, respectively, have been tasted. Specimens have spirals as shear reinforcement. The applied repair technique is mainly based on the use of thin epoxy resin infused under pressure into the crack system of the damaged RC joint bodies, the use of a polymer modified cement mortar with or without a fiberglass reinforcing mesh for the damaged infill masonry walls and the use of CFRP plates to the surfaces of the damaged structural RC members, as external reinforcement. Specimens after repair, were retested in the same way. Conclusions concerning the effectiveness of the applied repair technique, based on maximum cycles load, loading stiffness, and hysteretic energy absorption capabilities of the tested specimens, are drawn and commented upon.

• Journal of Welding and Joining
• /
• v.32 no.1
• /
• pp.61-65
• /
• 2014

The purpose of this study is to evaluate the applicability of the element stress to establish S-N design curve for the welded lap joint with thin plates below 2mm thickness. In order to do it, the extensive fatigue tests of the welded lap joints with INVAR alloy were performed. With the results, the deign S-N curves for the lap-weld were established by using the reference stresses such as the nominal stress range at the weld throat area, hot spot stress range and element stress range, and compared with regard to the standard deviation. The standard deviation of S-N curves with element stress range was less than that of S-N curves with other reference stresses. In addition, FEA results show the amount of the element stress is less sensitive to mesh size. Based on the results, it can be concluded that the element stress is to be used as the reference stress for the design S-N curves of the welded lap joint.

• Journal of Welding and Joining
• /
• v.35 no.2
• /
• pp.13-22
• /
• 2017

In laser full penetration welding process, full penetration hole(FPH) is formed as a result of force balance between the vapor pressure and the surface tension of the surrounding molten metal. In this work, a three-dimensional numerical model based on a conserved-mass level-set method is developed to simulate the transport phenomena during laser full penetration welding process, including full penetration keyhole dynamics. Ray trancing model is applied to simulate multi-reflection phenomena in the keyhole wall. The ghost fluid method and continuum method are used to deal with liquid/vapor interface and solid/liquid interface. The effects of processing parameters including laser power and scanning speed on the resultant full penetration hole diameter, laser energy distribution and energy absorption efficiency are studied. The model is validated against experimental results. The diameter of full penetration hole calculated by the simulation model agrees well with the coaxial images captured during laser welding of thin stainless steel plates. Numerical simulation results show that increase of laser power and decrease of welding speed can enlarge the full penetration hole, which decreases laser energy efficiency.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1416-1418
• /
• 1994

Expressions for the displacement of a bimorph, one end fixed and the other free, has been introduced when sinusoidal inputs were applied to the ceramic plates on a thin metal plate. Maximum displacements at the free end and strains at the position of strain gage attached were measured when various wave forms, voltages, and frequencies were applied to the bimorph whose length is 6.6[cm], width 2.5[cm], and thickness 0.0365[cm]. Under the constant voltage ( $70[V_{peak}]$ ), the strains and the displacements at the free end were larger than the case of the sinusoidal input when the square wave was applied and were smaller when triangular wave. It was shown that the displacements at the free end and the strains of the gage position were increased as the applied voltage in the range of $30-90[V_{peak}]$ and effective length were increased. And it was also found that the resonant frequency of a bimorph was decreased as its effective length was increased, and that the displacements and the strains were maximum at the resonant frequency.

• Journal of Microbiology and Biotechnology
• /
• v.3 no.1
• /
• pp.12-18
• /
• 1993

Pseudomonas aeruginosa strain B5 with antagonistic activity against Phytophthora capsici and Magnaporthe grisea, was isolated from pepper-growing soil. From the culture of P. aeruginosa strain B5 grown on King's medium B, antibiotic substances were purified using XAD-2 column chromatography. XAD-2 eluates inhibited not only the mycelial growth of P. capsid and M. grisea, but also the development of Phytophthora blight on pepper plants. The crude antibiotic substances were further purified by using silica gel column chromatography, Sephadex LH-20 column chromatography, thin layer chromatography on silica gel plates, and high performance liquid chromatography. Silica gel column chromatogrphy gave good separation of the four antibiotic substances. The pure antibiotics P1, P2, and P3 finally purified by preparative HPLC inhibited the mycelial growth of P. capsici, at concentrations from 7 to 10 $\mu g/ml$. Only P1 and P2 had antifungal activity against M. grisea at 8 $\mu g/ml$. P1 and P3 were highly inhibitory to the mycelial growth of Botryosphaeria dothidea and Botrytis cinerea at relatively low concentrations. However, the three antibiotics had no antifungal activity against Rhizoctonia solani. The chemical structures of these antibiotics are being identified.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.12
• /
• pp.1724-1728
• /
• 2002

The adsorption of proteins on the surface of glass slides is essential for the construction of protein chips. Here, we report that a Histidine (His)-tagged protein protein has been efficiently adsorbed on glass coated with nickel. A variety of nickel chloride-coated plates were prepared by the spin-coating method and adsorbed to the His-tagged protein. When the protein was adsorbed onto the surface of a variety of nickel chloride-coated glass slides, the efficiency of protein adsorption was dependent upon the coating conditions such as nickel chloride concentration, the spin speed and the drying temperature. The slides appropriate for protein adsorption were obtained when the slides were coated with 11%(w/w) of $NiCl_2$ at the spin speed of 4000 rpm for 20 sec and then dried at higher than 40°C. The physical properties of their nickel chloride thin layer were characterized by scanning electron microscopy. x-ray diffraction and atomic force microscopy, finding that the nickel chloride particles were around 10 nm in diameter and uniformly crystallized at 101 faces. These results show that nickel chloride-coated slides prepared by the spin-coating method are utilizable for the construction of Histagged protein chips.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.915-920
• /
• 2011

Four esters of succinic and maleic acid were synthesized, separated by thin-layer chromatography (TLC), and identified using matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-MS). A comparison of matrix materials showed that 2,6-dihydroxybenzoic acid (2,6-DHB) yielded a greater ionization efficiency than 2,5-DHB prior to TLC separation. The location of each ester sample on the TLC plate was estimated by comparing the developed plate with a duplicate plate that had been visualized by immersion in a $KMnO_4$ solution. Generally, mass spectra obtained from the $KMnO_4$-visualized plate were relatively poor. Reproducible mass spectra with high peak abundance were difficult to obtain using the 2,6-DHB matrix from crude synthetic esters extracted from the TLC plates. Significant improvements in both reproducibility and sensitivity were realized by using pencil lead as the MALDI matrix. The current methodology will be beneficial to organic chemists since it can provide a guideline for simple and rapid characterization of small organic compounds.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.4
• /
• pp.83-90
• /
• 1987

The applications of reduced integration technique, addition of nonconforming modes, and their coupling to the Mindlin plate elements to improve their basic behavior are reviewed and the establishment of a series of new plate elements by combined use of these schemes are presented in this paper. The element formulation is based upon quadratic Mindlin plate concept. The results obtained by new elements converged to the exact solutions very rapidly as the mesh is refined and showed reliable solutions even for severely distorted meshes. The new elements have the requisite numbers of zero eigenvalues associated with rigid body modes to avoid the spurious zero energy modes. These elements are shown to be applicable to the wide range of plate problems, giving a high accuracy for both thick and thin plates.

• Journal of Magnetics
• /
• v.15 no.4
• /
• pp.199-203
• /
• 2010

This paper discusses the effectiveness of high magnetization saturation in ILI (In-Line Inspection) using an MFL (Magnetic Flux Leakage) tool, and introduces a practical method for improving the magnetization level together with the piggability. Thin steel plates, replacing the conventional wire brushes were used as conductors to transfer the magnetic flux to the pipe wall. The newly designed MFL tool was compared with the conventional version by means of FEM (Finite Element Method) analysis and full-scale experiments. In the results, the newly developed magnetization system obtained a stronger MFL signal amplitude, specially 2.7 times stronger, than that obtained by the conventional magnetization system for the same defect dimensions.