• 한국진공학회지
• /
• 제11권4호
• /
• pp.240-248
• /
• 2002

결정성이 좋을 것으로 기대되는 Fe이 도핑된 $Fe_{x}Ti_{l-x}O_2$박막 (x=0.07과 0.16)을 rutile $TiO_2$(110) 기판위에 산소 플라즈마 적층 성장 방법으로 성장시켰다. 도핑되는 Fe의 함량에 따른 표면 특성을 규명하기 위하여 박막 성장은 같은 조건에서 이루어졌다. 여러 가지의 표면분석법을 이용하여 성장된 박막의 표면 특성을 규명하였다. $Fe_{x}Ti_{l-x}O_2$박막에 존재하는 Ti의 산화상태는 +4 이었고 Fe의 경우는 +2와 +3의 산화상태가 섞여있었으며 Fe의 함량이 높은 $Fe_{0.16}Ti_{0.84}O_2$박막에서 $Fe^{3+}$ 이온의 함량이 더 높은 것으로 나타났다. $Fe_{0.07}Ti_{0.93}O_2$박막은 기판과 유사한 평탄한 표면에 막대형과 원통형의 높은 island 형태로 성장되었다. $Fe_{0.16}Ti_{0.84}O_2$박막은 $Fe_{0.07}Ti_{0.93}O_2$ 박막보다는 평탄하지만 적은 island들이 뭉쳐있는 다소 거칠은 표면을 한 다결정성 형태로 성장되어 Fe의 함량에 따라 morphology가 다르게 나타났다.

• 한국재료학회지
• /
• 제15권2호
• /
• pp.134-138
• /
• 2005

This study was performed to investigate the surface properties of electrochemically oxidized pure niobium by anodic oxide and hydrothermal treatment technique. Niobium specimens of $10mm\times10mm\times1.0mm$ in dimension were polished sequentially from $\#600,\;\#800,\;\#1000$ emery paper. The surface of pure niobium sperimens was anodized in an electrolytic solution that was dissolved calcium and phosphate in water. The electrolytic voltage was set in the range of 250 V and the current density was $10mA/cm^2$. The specimen was hydrothermal treated in high-pressure steam at $300^{\circ}C$ for 2 hours using an autoclave. And all specimens were immersed in the in the Hanks' solution nth pH 7.4 at $37^{\circ}C$ for 30 days. The surface of specimen was characterized by surface roughness, scanning electron microscope(SEM), energy dispersion X-ray analysis(EDX), X-ray photoemission spectroscopy(XPS) test. The value of surface roughness was the highest in the anodized sample and $0.41{\pm}0.04\;{\mu}m$. The results of the SEM observation show that oxide layers of the multi porosity in the anodized sample were piled up on another, and hydroxyapatite crystal was precipitate from the surface of the hydrothermal treated sample. In the XPS analysis, O, Nb, C peak and small amounts of N peak were found in the polished specimens while Ca and P peak in addition to O, Nb, C and peak were observed in the hydrothermal treated sample.

• 한국추진공학회지
• /
• 제20권5호
• /
• pp.60-69
• /
• 2016

본 연구에서는 케로신-공기 혼합물 데토네이션 계산과 다물질 해석을 기반으로 데토네이션 하중에 의한 얇은 금속관의 열탄소성 거동에 대한 수치계산을 수행하였다. 데토네이션 하중은 케로신-공기 혼합물의 데토네이션을 활용하여 모델링하였으며, 검증을 위해 해석 결과를 C-J 조건과 실험적 셀 직경을 통해 비교 검증하였다. 또한 금속의 탄성/소성 거동을 확인하기 위하여, 소성 거동은 구리의 Taylor impact 문제로, 탄성 거동은 베를리움 평판 떨림 문제를 활용하였다. 온도에 의한 관의 탄소성 거동 변화를 확인하기 위하여 동일한 데토네이션 하중 하에서 초기 온도가 다른 관의 거동을 확인하고 이론식과의 비교를 통해 열연화 효과가 고려되어야 함을 확인하였다.

• Corrosion Science and Technology
• /
• 제14권6호
• /
• pp.261-266
• /
• 2015

The capacity of passive metal to repassivate after film damage determines the development of local corrosion and the resistance to corrosion failures. In this work, the repassivation kinetics of 316L stainless steel (316L SS) was investigated in borate buffer solution (pH 9.1) using a novel abrading electrode technique. The repassivation kinetics was analyzed in terms of the current density flowing from freshly bare 316L SS surface as measured by a potentiostatic method. During the early phase of decay (t < 2 s), according to the Avrami kinetics-based film growth model, the transient current was separated into anodic dissolution ($i_{diss}$) and film formation ($i_{film}$) components and analyzed individually. The film reformation rate and thickness were compared according to applied potential. Anodic dissolution initially dominated the repassivation for a short time, and the amount of dissolution increased with increasing applied potential in the passive region. Film growth at higher potentials occurred more rapidly compared to at lower potentials. Increasing the applied potential from 0 $V_{SCE}$ to 0.8 $V_{SCE}$ resulted in a thicker passive film (0.12 to 0.52 nm). If the oxide monolayer covered the entire bare surface (${\theta}=1$), the electric field strength through the thin passive film reached $1.6{\times}10^7V/cm$.

• Carbon letters
• /
• 제12권4호
• /
• pp.207-217
• /
• 2011

We discuss the influence of few-walled carbon nanotubes (FWCNTs) treated with nitric acid and/or sulfuric acid on field emission characteristics. FWCNTs/tetraethyl orthosilicate (TEOS) thin film field emitters were fabricated by a spray method using FWCNTs/TEOS sol one-component solution onto indium tin oxide (ITO) glass. After thermal curing, they were found tightly adhered to the ITO glass, and after an activation process by a taping method, numerous FWCNTs were aligned preferentially in the vertical direction. Pristine FWCNT/TEOS-based field emitters revealed higher current density, lower turn-on field, and a higher field enhancement factor than the oxidized FWCNTs-based field emitters. However, the unstable dispersion of pristine FWCNT in TEOS/N,N-dimethylformamide solution was not applicable to the field emitter fabrication using a spray method. Although the field emitter of nitric acid-treated FWCNT showed slightly lower field emission characteristics, this could be improved by the introduction of metal nanoparticles or resistive layer coating. Thus, we can conclude that our spray method using nitric acid-treated FWCNT could be useful for fabricating a field emitter and offers several advantages compared to previously reported techniques such as chemical vapor deposition and screen printing.

• 한국정보통신학회논문지
• /
• 제16권8호
• /
• pp.1747-1752
• /
• 2012

탄소를 포함한 SiOC 박막은 BTMSM과 산소의 혼합 프리커서를 이용하여 CVD방법으로 증착하였다. 전통적으로 유전상수를 측정하기 위해서 MIS(금속/절연막/반도체)방법을 이용하는데 박막의 균일성을 보장할 수 없기 때문에 나타나는 오차의 한계를 보상하기 위해서 광학적인 분석방법과 경도측정 등을 통하여 SiOC 박막이 분극이 낮아지는 영역을 추적하였다. 분극이 낮고 비정질성이 높은 박막에서 유전상수가 낮아지는 특성을 이용하여 유전상수를 도출하였다. 열처리 후 SiOC 박막의 유전상수는 분극의 감소에 의해 감소하였으며, FTIR 분석에 의한 결합신호는 높은 파수 영역으로 이동하였다. 950~1200 cm-1 영역의 주 결합은 Si-C와 Si-O 결합으로 이루어졌으며, Si-O 결합의 강도가 증가한 것은 결합력이 증착한 샘플에서 보다 증가하였다는 것을 의미하며, 열처리 후 더 안정된 박막이 되었다. 열처리 후 SiOC 박막은 유전상수가 2.06으로 낮게 나타났다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.508-508
• /
• 1996

;The growth of films have considerable interest in the field of superlattice structured multi-layer epitaxy led to realization of new devices concepts. Molecular beam epitaxy (MBE) with in situ observation by reflection high-energy electron diffraction (RHEED) is a key technology for controlled layered growth on the atomic scale in oxide crystal thin films. Also, the combination of radical oxygen source and MBE will certainly accelerate the progress of applications of oxides. In this study, the growth process of single crystal films using by MBE method is discussed taking the oxide materials of Bi-Sr-Ca-Cu family. Oxidation was provided by a flux density of activated oxygen (oxygen radicals) from an rf-excited discharge. Generation of oxygen radicals is obtained in a specially designed radical sources with different types (coil and electrode types). Molecular oxygen was introduced into a quartz tube through a variable leak valve with mass flowmeter. Corresponding to the oxygen flow rate, the pressure of the system ranged from $1{\;}{\times}{\;}10^{-6}{\;}Torr{\;}to{\;}5{\;}{\times}{\;}10^{-5}$ Torr. The base pressure was $1{\;}{\times}{\;}10^{-10}$ Torr. The growth of Bi-oxides was achieved by coevaporation of metal elements and oxygen. In this way a Bi-oxide multilayer structure was prepared on a basal-plane MgO or $SrTiO_3$ substrate. The grown films compiled using RHEED patterns during and after the growth. Futher, the exact observation of oxygen radicals with MBE is an important technology for a approach of growth conditions on stoichiometry and perfection on the atomic scale in oxide. The oxidization degree, which is determined and controlled by the number of activated oxygen when using radical sources of two types, are utilized by voltage locked loop (VLL) method. Coil type is suitable for oxygen radical source than electrode type. The relationship between the flux of oxygen radical and the rf power or oxygen partial pressure estimated. The flux of radicals increases as the rf power increases, and indicates to the frequency change having the the value of about $2{\times}10^{14}{\;}atoms{\;}{\cdots}{\;}cm^{-2}{\;}{\cdots}{\;}S^{-I}$ when the oxygen flow rate of 2.0 seem and rf power 150 W.150 W.

• 한국세라믹학회지
• /
• 제48권1호
• /
• pp.94-98
• /
• 2011

A Sn-doped $In_2O_3$ (ITO) nanowire photoelectrode was produced using a simple metal evaporation method at low synthesis temperature (< $540^{\circ}C$). The nanowire electrodes have large surface area compared with that of flat ITO thin film, and show low electrical resistivity of $5.6{\times}10^{-3}{\Omega}cm$ at room temperature. In order to apply ITO nanowires to the photoelectrodes of dye-sensitized solar cell (DSSC), those surfaces were modified by $TiO_2$ nanoparticles using a chemical bath deposition (CBD) method. The conversion efficiency of the fabricated $TiO_2$/ITO nanostructure-based DSSC was obtained at 1.4%, which was increased value by a factor of 6 than one without ITO nanowires photoelectrode. This result is attributed to the large surface area and superior electrical property of the ITO nanowires photoelectrode, as well as the structural advantages, including short diffusion length of photo-induced electrons, of the fabricated $TiO_2$/ITO nanostructure-based DSSC.

• 대한전자공학회논문지SD
• /
• 제45권7호
• /
• pp.1-8
• /
• 2008

본 논문에서는 플라스틱 기판에 OTFT를 스위칭 소자로 사용하여 유연한 EPD 패널을 제작하였다. OTFT의 채널 폭과 길이의 비(W/L)는 EPD의 응답속도를 고려하여 15이상으로 설계를 하였다. 게이트전극은 Al, 절연층은 cross-linked PVP, 반도체층은 펜타센, 중간층은 PVA/Acryl를 사용하였다. 플라스틱 기판은 보호층 처리를 통하여 열처리 공정 시 발생하는 입자를 제거하였고, 거친 표면을 평탄화하였다. 반도체층의 크기는 게이트 전극 보다 작도록 제한하여 누설전류를 줄일 수 있었다. EPD-상판과 OTFT-하판 사이에 픽셀전극을 삽입하고 또한 OTFT-하판을 보호하기 위하여 PVA/Acryl로 구성된 중간층을 상빙하였다. 완성된 OTFT-하판에서 OTFT의 이동도는 $0.21cm^2/V.s$, 전류점멸비(Ion/Ioff)는 $10^5$ 이상의 성능을 보였다.

• 마이크로전자및패키징학회지
• /
• 제16권4호
• /
• pp.55-60
• /
• 2009

불산과 에탄올 혼합용액에서 전기화학적 에칭을 통하여 다공성 실리콘 층을 제작하였다. 에칭 시 인가된 초음파의 주파수, 전류밀도, 에칭시간의 변화에 따른 다공성 실리콘 층의 변화를 확인하였다. 초음파를 가해주지 않은 시편은 표면에 특별한 변화가 일어나지 않았으나, 초음파 진동자의 주파수가 40 kHz와 130 kHz인 초음파 발생조에서 실험한 시편을 관찰한 결과, 가해준 초음파의 주파수가 높을수록 다공성 실리콘 층의 기공의 크기가 더 커지고 실리콘 표면에서의 에칭이 더 균일하게 일어났다. 후면접촉 에칭조와 current shield를 이용한 결과 다공성 실리콘 층 전면에 걸쳐 균일하게 기공이 발생하였다. 다공성 실리콘 층의 기공의 크기는 전류밀도가 증가함에 따라 함께 증가하였고, 에칭 시간에는 영향을 받지 않았다.