• 제목/요약/키워드: thin

검색결과 22,815건 처리시간 0.048초

찰옥수수 자식계통 식미관련 특성 및 계통 분류 (Major Characteristics Related on Eating Quality and Classification of Inbred Lines of Waxy Corn)

  • 정태욱;김선림;문현귀;손범영;김시주;김순권
    • 한국작물학회지
    • /
    • 제50권spc1호
    • /
    • pp.161-166
    • /
    • 2005
  • 작물과학원에서 육성한 찰옥수수 자식계통을 대상으로 농업적 형질 및 품질관련 특성 등을 분석하여 계통군화 시켜 교배 모, 부본의 기초 자료로 이용하고 품질육종의 효율성을 높이기 위한 연구결과를 요약하면 다음과 같다. 1. 작물과학원에서 육성한 찰옥수수 64개 자식계통에 대해서 옥수수 낱알형태를 조사한 결과 백립중은 $11.7\~37.3g$,과 피두께 $11\~77mm$, 립장 $5.8\~9.6mm$, 립폭 $6.5\~10.0mm$, 립두께 $4.1\~6.8mm$의 분포를 나타내었다. 2. 이화학적 특성 분석에 있어서는 단백질 함량은 $8.7\~15.8\%$, 지방 $2.3\~5.8\%$, 유리당 $1.1\~11.0\%$, 아밀로펙틴 $78.5\~93.8\%$의 다양한 변이분포를 보였다. 3. 아밀로그램을 분석한 결과 초기호화온도는 $64.5\~79.1^{\circ}C$, 최고점도 $14.8\~221.8$ RVU, 최저점도 $12.2\~109.6$ RVU, 최종점도 $20.1\~212.6$ RVU였으며 강하점도는 $2.0\~l12.2$ RVU, 치반점도 $-81.3\~85.3$ RVU, 응집점도 $7.9\~105.0$ RVU로 나타났다. 4. Texture 분석을 한 결과 껌성 $91\~383$, 경도 $181\~394$, 씹힘성 $73\~370$의 범위에 속하였다. 5. 64개 자식계통을 대상으로 단백질 등 14개 형질을 이용하여 주성분 분석을 한 결과 제 1주성분은 단백질과 지방 함량이 높고 경도가 높은 것으로 나타나 주로 저식미 계통군으로 분류되며 백립중과 립장이 부의 값이어서 소립의 형태를 보였으며 제2주성분은 립장, 립폭, 백립중 등이 정의 값을 나타내어 대립의 계통군들이 포함되며 경도와는 부의 상관을 보여 식미가 양호한 계통군으로 분류되었다. 6. 제1주성분과 제2주성분을 이용하여 군집분석을 한 결과 8개 자식계통군으로 구분할 수 있었으며 scatter diagram에서 제1주성분이 작아지고 제2주성분이 커지는 좌측 상단부에 분포한 VII, VIII군에 속한 계통들이 주로 식미가 높으며 조숙종보다는 중, 만숙종들이 대부분 이였다.

포항-울산간의 점토자원의 지질과 그 물리화학적 특성에 관한 연구 (A Study on Geology of Clay Mineral Deposits of Pohang-Ulsan Area and their Physico-Chemical Properties)

  • 김옥준;이하영;김서운;김수진
    • 자원환경지질
    • /
    • 제4권4호
    • /
    • pp.167-215
    • /
    • 1971
  • I. Purpose and Importance of the Study The purpose of the present study is to clarify to geological, mineralogical, and physico-chemical properties of the clay minerals deposits imbedded in the Tertiary sediments in the areas between. Pohang and Ulsan along southeastern coastal region of Korea. These clays are being mined and utilized for filter and insecticide after activation or simple pulverizing, nontheless activated clays are short coming as chemical industry in Korea has been rapidly grown in recent years. In spite of such increase in clay demand, no goological investigation on clay deposits nor physico-chemical properties of the clays have been carried out up to date. Consequently activated clays produced in Korea is not only of low grade but also of shortage in supply, so that Korea has to import activated clays of better grade. The importance of the present study lies, therefore, on that guiding principle could be laid down by knowing stratigraphical horizons, of clay deposits and fundamental data of improving grade of activated clays might be derived from the results of physico-chemical examinations. II. Contents and Scope of the study The contents of the study are pinpointed down in the following two subjects: 1) General geological investigation of Tertiary formations distributed in the areas between Pohang and UIsan, and detail geological study of the bentonitic clay deposits imbedded in them. 2) To clarifty physico-chemical characteristics of the clays by means of chemical analysis, X-ray diffraction and electron microscope. The scope of the study involves the following there points: i) Regional geological investigation-This investigation has been carried out in order to find out the distribution of Tertiary sediments and exact location of clay mineral deposits in the areas between Pohang and UIsan. ii) Detail geological investigation-This has been concentrated in and around the clay deposits which. had been found out by the regional investigation. iii) Laboratory researchs include i) age determination and correlation of Tertiary sediments by paleontological study, and ii) Chemical analysis, X-ray diffraction, and electron microscopic studies on clays, samples taken from various clay deposits. III. Research Results and Suggestions 1) The geology of the area investigated is composed mainly of Janggi and Beomgokri groups of Miocene age in ascending order rested on the upper Silla system, Balkuksa granite and volcanic rocks of upper Cretaceous age as base. 2) Janggi group is composed in ascending order of Janggi conglomerate, Nultaeri rhyolitic tuff, Keumkwangdong shale, two beds of lignite-bearing formations which consist of alternation of conglomerate, sandstone and mudstone, and andesitic, rhyolitic, and basaltic tuff beds. 3) Beomgokri group is mainly composed of andesitic to rhyolitic tuff interlayered by conglomerate and tuffaceous sandstone. In the areas around boundary between North-and South Kyeongsang-do is distributed Haseori farmation which is composed of conglomerate, sandstone, mudstone and andesitic to rhyolitic tuff, and which is correlated to Eoilri formation of Janggi group. 4) Clay deposits of the area are interbedded in Eoilri, Haseori, Nultaeri tuff, Keumkwangdong shale, upper and lower horizon of the lower lignite-bearing seam, and Keumori rhyolitic tuff formations of Janggi group; and are genetically classi.fied into four categories, that is, i) those derived from volcanic ash beds(Haseori and Daeanri deposits), ii) those of secondary residual type from rhyolitic tuff beds(Seokupri deposits), iii) Clay beds above and beneath the lignite seams, (Janggi and Keumkwangdong deposits), and iv) those derived from rhyolitic tuff beds(Sangjeong and Tonghae deposits). 5) Mineral constituents of clay deposits are, according to X-ray diffraction, montmorillonite accompanied in different degree by cristobalite, plagioclase, quartz, stilbite, and halloysite in rare occasion. The clays are grouped according to mineral composition into four types; i) those consist mostly of montmorillonite, ii) those composed of montmorillonite and cristobalite, iii) those composed of montmorillonite and plagioclase, and iv) those composed of montmorillonite, plagioclase and quartz. 6) Clays interbedded in Haseori formation and vicinity of lignite seams belong to the first type, are of good quality and derived either from volcanic ash bed, or primary clay beds near lignite seams. Clays belonged to other types are derived from weathering of rhyolitic tuff formations and their quality varies depending upon original composition and degree of weathering. Few clays in secondary residual type contain small amount of halloysite. 7) Judging from analytical data, content of silica($SiO_2$) varies proportionally with content of cristobalite, and alumina($Al_2O_3$) content does not vary with that of plagioclase, but increases in the sedimentary bedded type of deposits. 8) It is unknown whether or not these days could be upgraded by beneficiation since no grain size of these impurities nor beneficiation test had been studied. 9) Clay beds derived from valcanic ash layers or sedimentary layers at the vicinity of lignite seams are thin in thickness and of small, discontinueous lenticular shape, although they are of good quality; and those derived from rhyolitic tuff formations or residual type from tuff are irregular in both occurrence and quality. It is, therefore, not only very difficult but also meaningless to calculate its reserve, and reserve estimation, even if done, will greatly be deviated from practically minable one. Consequently, way of discovery and exploitation of clay deposits in the area under consideration is to check the geologically favorable areas whenever needed.

  • PDF

전라남도 나주시 동강면 일대 황토(풍화잔류토)의 토양학적 및 광물학적 특성 연구 (Pedological and Mineralogical Characterizations of Hwangto (Yellow Residual Soils), Naju, Jeollanam-do, Korea)

  • 김유미;배조리;김정빈;노열
    • 자원환경지질
    • /
    • 제47권2호
    • /
    • pp.87-96
    • /
    • 2014
  • 본 연구는 전라남도 나주지역 황토의 토양학적 및 광물학적 특성을 확인하고 주변 모암과의 상관관계를 통해 그 기원 및 형성과정을 알아보고자 하였다. 연구지역은 전라남도 나주시 동강면 장동리이며, 토양단면(약 150 cm 깊이)의 황토를 깊이별로 상부, 중부, 하부층으로 나누어 토양학적 특성(색, pH, 입도분리)과 광물학적 특성(광물조성, 입자의 크기, 모양, 화학조성)을 연구하였다. 모암시료는 박편제작 및 현미경관찰을 통해 구성광물을 기재하고 황토의 구성광물과 연관성을 알아보았다. 연구 결과 황토는 pH 4.3~5.1 범위를 갖는 산성토이며 미사와 점토가 주로 구성된(약 95%) 미사질양토와 미사질식양토였다. 모래와 미사의 주 구성광물은 석영, 운모, 장석이며 점토는 침철석, 수산화층간 버미큘라이트, 일라이트, 카올리나이트, 할로이사이트, 질석과 소량의 석영이 포함되어 있었다. 모래와 미사의 SEM-EDX 분석을 통해 구성광물의 형태를 확인한 결과, 풍화작용으로 인해 부식되어 표면이 거칠고 산화철로 피복되어 있는 장석이 관찰되었고 하부층으로 갈수록 그 양은 증가했다. 점토는 TEM 분석을 통해 다양한 형태의 층상규산염광물이 확인되었으며, 상부에서 하부층으로 갈수록 침철석의 양이 증가했는데 이는 상부 층에서 용탈된 산화철이 하부층으로 이동되어 집적된 것으로 사료된다. 황토의 모암으로 사료되는 주변의 암석은 석영, 사장석, 흑운모, 녹니석 등으로 이루어진 화강반암이었다. 즉, 화강암류의 모암에서 장석과 운모 등이 풍화작용을 받아 일라이트, 질석, 수산화층간버미큘라이트 및 카올리나이트로 변하였으며 침철석은 흑운모 풍화에 의해 형성된 것으로서, 본 연구지역의 황토는 오랜 기간 풍화작용에 의해 형성된 풍화잔류토로 판단된다.

LCD 연구 개발 동향

  • 이종천
    • 전자공학회지
    • /
    • 제29권6호
    • /
    • pp.76-80
    • /
    • 2002
  • 'Liquid Crystal의 상전이(相轉移)와 광학적 이방성(異方性)이 1888년과 1889년 F. Reinitzer와 O. Lehmann에 의해 Monatsch Chem.과 Z.Physikal.Chem.에 각각 보고된 후 부터 제2차 세계대전이 끝난 뒤인 1950년대 까지는 Liquid Crystal을 단지실험실에서의 기초학문 차원의 연구 대상으로만 다루어 왔다. 1963년 Williams가 Liquid Crystal Device로는 최초로 특허 출원을 하였으며, 1968년 RCA사의 Heilmeier등은 Nematic 액정(液晶)에 저주파(低周波) 전압(電壓)을 인가하면 투명한 액정이 혼탁(混濁)상태로 변화하는 '동적산란(動的散亂)'(Dynamic Scattering) 현상을 이용하여 최초의 DSM(Dynamic Scattering Mode) LCD(Liquid Crystal Display)를 발명하였다. 비록 150V 이상의 높은 구동전압과 과소비전력의 특성 때문에 실용화에는 실패하였지만 Guest-Host효과와 Memory효과 등을 발견하였다. 1970년대에 이르러 실온에서 안정되게 사용 가능한 액정물질들이 합성되고(H. Kelker에 의해 MBBA, G. Gray에 의한 Cyano-Biphenyl 액정의 합성), CMOS 트랜지스터의 발명, 투명도전막(ITO), 수은전지등의 주변기술들의 발전으로 인하여 LCD의 상품화가 본격적으로 이루어지게 되었다. 1971년에는 M. Shadt, W. Helfrich, J.L. Fergason등이 TN(Twisted Nematic) LCD를 발명하여 전자 계산기와 손목시계에 응용되었고, 1970년대 말에는 Sharp에서 Dot Matrix형의 휴대형 컴퓨터를 발매하였다. 이러한 단순 구동형의 TN LCD는 그래픽 정보를 표시하는 데에는 품질의 한계가 있어 1979년 영국의 Le Comber에 의해 a-Si TFT(amorphous Silicon Thin Film Transistor) LCD의 연구가 시작되었고, 1983년 T.J. Scheffer, J. Nehring, G. Waters에 의해 STN(Super Twisted Nematic) LCD가 창안되었고, 1980년 N. Clark, S. Lagerwall 및 1983년 K.Yossino에 의해 Ferroelectric LCD가 등장하여 LCD의 정보 표시량 증대에 크게 기여하였다. Color화의 진전은 1972년 A.G. Ficher의 셀 외부에 RGB(Red, Green, Blue) filter를 부착하는 방안과, 1981년 T. Uchida 등에 의한 셀 내부에 RGB filter를 부착하는 방법에 의해 상품화가 되었다. 1985년에는 J.L. Fergason에 의해 Polymer Dispersed LCD가 발명되었고, 1980년대 중반에 이르러 동화상(動畵像) 표시가 가능한 a-Si TFT LCD의 시제품(試製品) 개발이 이루어지고 1990년부터는 본격적인 양산 시대에 접어들게 되었다. 1990년대 초에는 STN LCD의 Color화 및 대형화(大型化) 고(高)품위화에 힘입어 Note-Book PC에 LCD가 본격적으로 적용이 되었고, 1990년대 후반에는TFT LCD의 표시품질 대비 가격경쟁력 확보로 인하여 Note-Book PC 시장을 독점하기에 이르렀다. 이후로는 TFT LCD의 대형화가 중요한 쟁점으로 부각되고 있고, 1995년 삼성전자는 당시 세계최대 크기의 22' TFT LCD를 개발하였다. 또한 LCD의 고정세(高情細)화를 위해 Poly Si TFT LCD의 개발이 이루어졌고, 디지타이져 일체형 LCD의 상품화가 그 응용의 폭을 넓혔으며, LCD의 대형화를 위해 1994년 Canon에 의해 14.8', 21' 등의 FLCD가 개발되었다. 대형화 방안으로 Tiled LCD 기술이 개발되고 있으며, 1995년에 Sharp에 의해 21' 두장의 Panel을 이어 붙인 28' TFT LCD가 전시되었고 1996년에는 21' 4장의 Panel을 이어 붙인 40'급 까지의 개발이 시도 되었으며 현재는 LCD의 특성향상과 생산설비의 성능개선과 안정적인 공정관리기술을 바탕으로 삼성전자에서 단패널 40' TFT LCD가 최근에 개발되었다. Projection용 디스플레이로는 Poly-Si TFT LCD를 이용하여 $25'{\sim}100'$사이의 배면투사형과 전면투사형 까지 개발되어 대형 TV시장을 주도하고 있다. 21세기 디지털방송 시대를 맞아 플라즈마디스플레이패널(PDP) TV, 액정표시장치 (LCD)TV, 강유전성액정(FLCD) TV 등 2005년에 약 1500만대 규모의 거대 시장을 형성할 것으로 예상되는 이른바 '벽걸이TV'로 불리는 차세대 초박형 TV 시장을 선점하기 위하여 세계 가전업계들이 양산에 총력을 기울이고 있다. 벽걸이TV 시장이 본격적으로 형성되더라도 PDP TV와 LCD TV가 직접적으로 시장에서 경쟁을 벌이는 일은 별로 없을 것으로 보인다. 향후 디지털TV 시장이 본격적으로 열리면 40인치 이하의 중대형 시장은 LCD TV가 주도하고 40인치 이상 대화면 시장은 PDP TV가 주도할 것으로 보는 시각이 지배적이기 때문이다. 그러나 이러한 직시형 중대형(重大型)디스플레이는 그 가격이 너무 높아서 현재의 브라운관 TV를 대체(代替)하기에는 시일이 많이 소요될 것으로 추정되고 있다. 그 대안(代案)으로는 비교적 저가격(低價格)이면서도 고품질의 디지털 화상구현이 가능한 고해상도 프로젝션 TV가 유력시되고 있다. 이러한 고해상도 프로젝션 TV용으로 DMD(Digital Micro-mirror Display), Poly-Si TFT LCD와 LCOS(Liquid Crystals on Silicon) 등의 상품화가 진행되고 있다. 인터넷과 정보통신 기술의 발달로 휴대형 디스플레이의 시장이 예상 외로 급성장하고 있으며, 요구되는 디스플레이의 품질도 단순한 문자표시에서 그치지 않고 고해상도의 그래픽 동화상 표시와 칼라 표시 및 3차원 화상표시까지 점차로 그 영역이 넓어지고 있다. <표 1>에서 보여주는 바와 같이 LCD의 시장규모는 적용분야 별로 지속적인 성장이 예상되며, 새로운 응용분야의 시장도 성장성을 어느 정도 예측할 수 있다. 따라서 LCD기술의 연구개발 방향은 크게 두가지로 분류할 수 있으며 첫째로는, 현재 양산되고 있는 LCD 상품의 경쟁력강화를 위하여 원가(原價) 절감(節減)과 표시품질을 향상시키는 것이며 둘째로는, 새로운 타입의 LCD를 개발하여 기존 상품을 대체하거나 새로운 시장을 창출하는 분야로 나눌 수 있다. 이와 같은 관점에서 현재 진행되고 있는 LCD기술개발은 다음과 같이 분류할 수 있다. 1) 원가 절감 2) 특성 향상 3) New Type LCD 개발.

  • PDF

산소 어닐링이 마그네 트론 스퍼터링으로 증착된 undoped ZnO박막의 구조적, 광학적, 전기적 특성에 미치는 영향에 대한 연구 (A Study on the Effect of O$_2$ annealing on Structural, Optical, and Electrical Characteristics of Undoped ZnO Thin Films Deposited by Magnetron Sputtering)

  • 윤의중;박형식
    • 대한전자공학회논문지SD
    • /
    • 제46권7호
    • /
    • pp.7-14
    • /
    • 2009
  • 본 연구에서는 어닐링조건이 ZnO 박막의 결정구조((002) 세기, FWHM d-간격, grain 크기, (002) 피크 위치) 광학 (UV 피크, UV 피크 위치) 및 전기적 성질 (전자농도, 비저항, mobility)에 미치는 영향을 조사하였다. ZnO 박막은 RF 마그네트론 스퍼터링으로 ZnO 타겟을 사용하여 SiO$_2$/Si 기판 상에 증착하였다. 증착도중 기판에 열을 가하지 않았고 ZnO 박막은 $500^{\circ}C\sim650^{\circ}C$의 온도범위와 5분$\sim$20분의 시간범위에서 어닐링 되었다. 샘플의 표면 거칠기 및 구조는 각각 SEM과 XRD로 분석하였다. 광학 성질은 He-Cd 325 nm 레이저를 사용하여 상온에서 측정된 photoluminescence (PL)로 평가 하였다. 어닐링 온도 및 시간 변화에 따라 다음과 같은 관계가 관찰되었다: (1) UV intensity, (002) intensity, grain size 사이에 비례관계가 성립하고, (2) UV intensity는 FWHM와 반비례하고, (3) UV intensity는 전자농도와 큰 상관관계가 없고, (4) d-spacing과 (002) peak position은 반비례 관계에 있고, (5) 3.20$\sim$3.24 eV 범위의 UV peak position은 ZnO 박막이 n-type 특성을 가진다는 것을 의미하며 이는 전기적인 특성의 결과와 일치하고, (6) 최고의 광학 및 구조적 특성을 갖기 위한 최적조건은 0.2의 산소분압(O$_2$/(O$_2$+Ar)), 240W의 PF 파워, 상온의 기판온도, 600$^{\circ}C$온도를 20분 유지하는 어닐링 조건, 그리고 20 mTorr의 스퍼터링 압력 등을 들 수 있다.

Machined 티타늄 임플란트와 calcium phosphate coated 티타늄 임플란트의 조직형태계측학적 연구 (Histomorphometric study of machined titanium implants and calcium phosphate coated titanium implants)

  • 강현주;양재호
    • 대한치과보철학회지
    • /
    • 제48권2호
    • /
    • pp.122-127
    • /
    • 2010
  • 연구목적: 본 연구는 machined 임플란트와 골유도능이 있는 calcium phosphate를 electron-beam deposition으로 coating처리한 임플란트의 골/임플란트 접촉률을 조직형태계측학적으로 비교하는 것이다. 연구 재료 및 방법:여섯 마리의 수컷 New Zealand white rabbit과직경3.3 mm, 길이 5 mm의 임플란트 24개를 준비하였다. Machined 임플란트 (대조군)와 calcium phosphate coated 임플란트(실험군)를 좌, 우 경골에 2개씩 총 4개를 식립하고 임플란트 주위에 부하가 가해지지 않도록 하여 3주, 6주의 치유기간을 두었다. 식립 3주와 6주후, 각각 3마리의 토끼를 희생하여 조직시편을 제작하였다. 제작된 시편을 광학현미경 하에서 골/임플란트 접촉률 (BIC ratio)을 계산하고 paired t-test로 두 군을 비교하였다. 결과:골/임플란트 접촉률은 임플란트 식립 3주후, 대조군에서 평균과 표준편차는$44.1{\pm}16.5%$ 이었고 실험군은 $70.8{\pm}18.9%$로 실험군이 통계적으로 유의하게 높았다 (P= 0.0264). 6주후의경우, machined 임플란트는 $78.6{\pm}15.1%$, calcium phosphate coated 임플란트는 $79.0{\pm}26.0%$로 두 군 간 통계적으로 유의한 차이는 없었다. 결론: Calcium phosphate coated 임플란트는 machined 티타늄 임플란트에 비해 빠른 초기 골반응을 나타냈다. 그러므로, 임상적으로 calcium phosphate coated 임플란트를 사용했을 때, 수술 후 치유 기간을 단축하여 조기 부하가 가능할 것으로 사료된다.

양극산화에 의한 티타늄 산화막의 표면 특성 및 생체 활성에 관한 연구 (SURFACE CHARACTERISTICS AND BIOACTIVITY OF ANODICALLY OXIDIZED TITANIUM SURFACES)

  • 이상한;조인호
    • 대한치과보철학회지
    • /
    • 제45권1호
    • /
    • pp.85-97
    • /
    • 2007
  • Statement of problem: Recently, anodic oxidation of cp-titanium is a popular method for treatment of titanium implant surfaces. It is a relatively easy process, and the thickness, structure, composition, and the microstructure of the oxide layer can be variably modified. Moreover the biological properties of the oxide layer can be controlled. Purpose: In this study, the roughness, microstructure, crystal structure of the variously treated groups (current, voltage, frequency, electrolyte, thermal treatment) were evaluated. And the specimens were soaked in simulated body fluid (SBF) to evaluate the effects of the surface characteristics and the oxide layers on the bioactivity of the specimens which were directly related to bone formation and integration. Materials and methods: Surface treatments consisted of either anodization or anodization followed thermal treatment. Specimens were divided into seven groups, depending on their anodizing treatment conditions: constant current mode (350V for group 2), constant voltage mode (155V for group 3), 60 Hz pulse series (230V for group 4, 300V for group 5), and 1000 Hz pulse series (400V for group 6, 460V for group 7). Non-treated native surfaces were used as controls (group 1). In addition, for the purpose of evaluating the effects of thermal treatment, each group was heat treated by elevating the temperature by $5^{\circ}C$ per minute until $600^{\circ}C$ for 1 hour, and then bench cured. Using scanning electron microscope (SEM), porous oxide layers were observed on treated surfaces. The crystal structures and phases of titania were identified by thin-film x-ray diffractmeter (TF-XRD). Atomic force microscope (AFM) was used for roughness measurement (Sa, Sq). To evaluate bioactivity of modified titanium surfaces, each group was soaked in SBF for 168 hours (1 week), and then changed surface characteristics were analyzed by SEM and TF-XRD. Results: On basis of our findings, we concluded the following results. 1. Most groups showed morphologically porous structures. Except group 2, all groups showed fine to coarse convex structures, and the groups with superior quantity of oxide products showed superior morphology. 2. As a result of combined anodization and thermal treatment, there were no effects on composition of crystalline structure. But, heat treatment influenced the quantity of formation of the oxide products (rutile / anatase). 3. Roughness decreased in the order of groups 7,5,2,3,6,4,1 and there was statistical difference between group 7 and the others (p<0.05), but group 7 did not show any bioactivity within a week. 4. In groups that implanted ions (Ca/P) on the oxide layer through current and voltage control, showed superior morphology, and oxide products, but did not express any bioactivity within a week. 5. In group 3, the oxide layer was uniformly organized with rutile, with almost no titanium peak. And there were abnormally more [101] orientations of rutile crystalline structure, and bonelike apatite formation could be seen around these crystalline structures. Conclusion: As a result of control of various factors in anodization (current, voltage, frequency, electrolytes, thermal treatment), the surface morphology, micro-porosity, the 2nd phase formation, crystalline structure, thickness of the oxide layer could be modified. And even more, the bioactivity of the specimens in vitro could be induced. Thus anodic oxidation can be considered as an excellent surface treatment method that will able to not only control the physical properties but enhance the biological characteristics of the oxide layer. Furthermore, it is recommended in near future animal research to prove these results.

컴포머와 유치 상아질의 결합에 관한 연구 (A STUDY ON THE BONDING OF COMPOMER TO DECIDUOUS DENTIN)

  • 김지태;김용기;김종수;권순원
    • 대한소아치과학회지
    • /
    • 제29권4호
    • /
    • pp.509-518
    • /
    • 2002
  • 치과 임상에서 널리 사용되고 있는 대표적인 심미성 접착 수복재료인 복합 레진과 글라스 아이어노머 시멘트의 단점을 보완하여 개발된 것으로 알려진 컴포머의 유치 상아질에 대한 결합력을 평가하고자 본 실험을 수행하였다. 치아 교환을 이유로 최근에 발거된 유구치 144개를 실험대상 치아로 선정하였으며, 이 중 120개의 치아는 전단강도 측정실험을 위하여 나머지 24개는 결합계면의 주사전자 현미경 관찰을 위해 무작위로 배분하였다. 각 치아마다 $3{\times}4mm$의 상아질을 노출시킨 후 내경 2.6mm, 높이 2.0mm의 크기로 제작된 폴리에틸렌 주형을 상아질 표면에 고정시킨 다음 각각의 재료를 설정 조건에 따라 충전하였다. 전단강도 실험표본은 만능 시험기를 사용하여 측정하였으며, 주사 전자현미경 관찰 표본 중 1/2은 다시 근원심으로 절단하여 그 결합계면을 관찰하였으며 나머지 1/2은 치아를 완전 탈회시킨 후 상아질 내에 침투된 접착제의 형태를 관찰하였다. 본 실험의 결과 모든 컴포머 군($II{\sim}V$)의 전단강도가 글라스 아이어노머 군(I)보다 높게 나타났고, 산 부식을 시행한 컴포머 군(III, V)이 산 부식을 시행하지 않고 충전한 컴포머 군(II, IV)에 비해 높은 전단강도를 보였으며(p<.05) 복합 레진 군(VI)과의 비교에서도 통계학적인 유의차가 없었다(p>.05). 서로 다른 접착제를 사용한 컴포머군 간의 비교에서는 모두 유의차가 나타나지 않았다. 상아질-수복재 계면의 관찰 결과, 산 부식 처리된 상아질과 결합된 컴포머 군이 처리하지 않은 군에 비해 다소 두꺼운 혼화층이 균일하게 형성되어 있었고 레진 돌기도 더욱 치밀하게 침투한 양상을 보였다. 주사 현미경 관찰에서는 산부식 하지 않은 컴포머 군이 전반적으로 짧고 얇은 레진 태그가 불규칙하게 분포되어 있는 양상을 보인 반면, 산부식을 시행한 군과 복합 레진 군에서는 굵고 긴 레진 태그들이 규칙적이며 치밀한 분포를 나타냈다. 이상의 결과로 미루어 상아질의 산 부식 과정이 컴포머의 결합력 증진에 긍정적 요인으로 작용한 반면 상아질 접착제의 종류는 별다른 영향을 주지 않은 것으로 분석되었다. 결합강도의 비교에서 컴포머가 글라스 아이어노머에 비해 우수한 것으로 평가되어 소아 환자의 유구치 심미 수복재료로서의 가능성이 입증되었다.

  • PDF

Hairless Mice를 이용한 광노화 모델에서 꾸지뽕나무 추출물의 피부주름 형성 억제효과 (Anti-wrinkle Activity of a Curdrania tricuspidata Extract on Ultraviolet-induced Photoaging)

  • 김옥경;호진녕;남다은;전우진;이정민
    • 한국식품영양과학회지
    • /
    • 제42권4호
    • /
    • pp.608-614
    • /
    • 2013
  • 본 실험에서는 안전하고 우수한 효과를 지닌 천연항산화제의 광노화에 의한 피부주름 형성을 억제하는 천연물질을 탐색하기 위한 연구의 일환으로 CTL80의 식이투여와 로션 도포가 광노화를 유발한 동물모델에서 주름 형성에 미치는 영향을 살펴보았다. 광노화 유발 동물모델을 만들기 위해 hairless mice에 10주 동안 UVB 조사를 주 3회 실시하였다. 형태학적 변화를 관찰한 결과 UVB를 조사한 군은 각질이 증가하고 주름 능선의 두께가 굵고 주름이 깊게 형성한 반면, 양성대조군인 비타민 C와 CTL80 처리한 군에서 주름 형성이 감소하였으며, 특히 2% CTL80 로션 도포군이 가장 주름 형성을 억제하였다. 피부조직의 H&E 염색을 통한 조직학적인 변화에서는 UVB 조사로 두꺼워진 각질층과 표피층을 관찰하였으며 진피층의 교원섬유가 감소되었음이 관찰되었다. CTL80은 각질층과 표피층의 증가를 감소시켰으며 진피층의 교원섬유를 증가시켰음을 관찰하였다. 형태학적 변화와 같이 2% CTL80 로션 도포군의 효과가 가장 양호하게 나타났다. 항산화 상태에 미치는 영향을 살펴보기 위해 동물 혈청의 SOD와 GSH-Px의 활성을 측정한 결과, 비타민C와 CTL80처리 군에서 UVB만 조사한 군에 비하여 활성이 유의적으로 높아졌음을 살펴볼 수 있었다. 항산화 활성 또한 CTL80에 농도 의존적이지는 않았으나 식이 투여군에 비하여 로션 도포군에서 높은 활성을 보였다. 교원질 합성을 억제하고 분해를 촉진시키는 MMPs(MMP-1, MMP-3, MMP-9)의 발현을 실시간 정량 PCR로 측정하여 발현 변화를 살펴보았다. 그 결과 식이 투여군과 로션 도포군 모두 UVB 조사군에서는 발현이 현저히 높아졌으나 비타민 C와 CTL80 처리 군에서 유의적으로 낮아졌음을 살펴볼 수 있었다. 특히 CTL80 로션 도포군에서 MMP-9의 발현이 확연히 낮아졌음을 관찰할 수 있었다. 이러한 결과를 통하여 CTL80은 높은 항산화 활성을 지녔으며 이러한 항산화능을 통하여 UVB로 광노화를 유발시킨 동물모델에서 주름 생성 억제에 긍정적인 영향을 미쳤고 주름 억제 효능을 지니는 기능성 소재로써 개발 가능성을 확인하였다.

에스트라디올 유도체의 합성, 표지 및 체내동태에 관한 연구 (A Study on the Synthesis, Labeling and Its Biodistribution of Estradiol Derivatives)

  • 김상욱;양승대;서용섭;전권수;안순혁;임수정;최창운;임상무;김영순;유국현
    • 대한핵의학회지
    • /
    • 제34권5호
    • /
    • pp.403-409
    • /
    • 2000
  • 목적: 에스트로겐 수용체의 불균질 분포와 시간 변화에 따른 수용체 상태의 변화 때문에 조직검사를 통한 에스트로겐 수용체의 생화학적 측정은 유방암을 진단하기에 충분하지 못한 단점이 있다. 이런 단점을 개선하고 좀더 나은 유방암의 진단을 위하여 E-$[^{123}I]$IVE에 대하여 연구하였다. 본 연구에서는 에스트로겐 수용체 양성 유방암 환자의 영상을 얻기에 적합한 방사성 추적자를 개발 하였다. 대상 및 방법: 여러 가지 에스트라디올 유도체 중에서 $17{\alpha}$-ethynyl estradiol로부터 $17{\alpha}-[^{123}I]$iodovinyl estradiol ($[^{123}I]$IVE)을 합성하였다. E-$[^{123}I]$IVE는 peracetic acid와 $[^{123}I]$NaI를 이용하여 합성하였고, Z-$[^{123}I]$IVE는 chloramine-T/HCl과 $[^{123}I]$NaI로 합성하였다. 표지수율은 TLC-scanner를 이용해 측정하였으며, 방사 화학적 순도는 HPLC로 측정하였다. E-$[^{123}I]$IVE의 체내 동태 연구는 immature female Fisher rate를 사용해 60분, 120분 그리고 300분에 측정하였다. 결과: E-$[^{123}I]$IVE와 Z-$[^{123}I]$IVE의 표지수율은 각각 92%와 94%이었고, 정제 후 방사 화학적 순도는 98% 이상이었다. E-$[^{123}I]$IVE의 최고섭취는 uterus에서 주사 120분 후에 관찰되었다(3.11%ID/g). 결론: 이상의 결과를 종합해 볼 때 E-$[^{123}I]$IVE는 유방암환자의 에스트로겐 수용체의 존재를 평가하는 진단시약으로서의 사용 가능성을 확인하였다.

  • PDF