• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.559-565
• /
• 1998

Flexural tests on 2.4m long reinforced concrete beams with epoxy-bonded GFRP plates are reported in these tests. The selected experimental variables are strengthening plate length, plate thickness, plate width and the method of anchoring the plate ends. The effects of these variables in overall behavior are discussed. The results generally indicate that the flexural strength of strengthened beams is increased. The ductile behavior of tested beams in inversely proportional to the plate thickness, plate width. The use of an U-jacket plate provided a proper anchorage system and improved the ductility of beams.

• 대한방사선기술학회지:방사선기술과학
• /
• 제33권4호
• /
• pp.363-367
• /
• 2010

본 연구의 목적은 X-선촬영장치의 1차방어벽두께 계산에 관한 쉬운 방법의 연구이다. X-선촬영장치에 대한 1차방어벽의 두께 계산을 위하여, 차폐물질은 콘크리트를 선택하였다. 방어벽의 구역들은 관리구역과 비관리구역으로 분류하였다. 두께의 계산은 NCRP 보고서 49와 51의 데이터를 사용하였다. 최대관전압 100과 150 kVp를 갖는 X-선촬영장치들에 대하여, 콘크리트 두께들은 거리의 함수로서 계산되었다. 계산된 데이터로부터, 식 (3), (4), (5), 그리고 (6)은 지수감소함수의 정합을 수행하여 얻었다. 본 연구에서 얻어진 수식들로부터, 1차방어벽의 두께는 근사적으로 계산할 수 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.539-541
• /
• 2005

The purpose of this study is to accurately understand the flexural behavior in RC beam with strrup on repair thickness of DFRCC. Using a four-point bending test, the shear strengths and shear stress-deflection relations of DFRCC repair RC specimens are obtained. The results show that DFRCC can be effectively used for repairing materials for concrete structures.

• 한국소음진동공학회논문집
• /
• 제16권6호
• /
• pp.574-581
• /
• 2006

Flat plate slab systems are more economical rather than reinforced concrete frame systems because flat plate slab system reduces story height. Furthermore flat plate systems are more popularly needed in construction practice due to flexibility of plan. Korean Concrete Provisions 2003 provide the minimum thickness of the slab that satisfies serviceability requirement to the static displacement. However, floor thickness in residence buildings may not satisfy the floor vibration criteria although the thickness satisfies the serviceability requirements in current design provisions. This study estimates the dynamic properties of floor vibration for existing flat plate slabs, and proposes the slab thickness satisfying the floor vibration criteria. The dynamic response analysis using finite element method and reliability analysis are carried out for this Purpose.

• Computers and Concrete
• /
• 제27권4호
• /
• pp.369-383
• /
• 2021

This article deals with the frequency analysis of viscoelastic sandwich disk with graphene nano-platelets (GPLs) reinforced viscoelastic concrete (GPLRVC) face sheets and honeycomb core. The honeycomb core is made of aluminum due to its low weight and high stiffness. The rule of the mixture and modified Halpin-Tsai model are engaged to provide the effective material constant of the concrete. By employing Hamilton's principle, the governing equations of the structure are derived and solved with the aid of the Generalize Differential Quadrature Method (GDQM). In this paper, viscoelastic properties are modeled according to Kelvin-Voigt viscoelasticity. The deflection as the function of time can be solved by the fourth-order Runge-Kutta numerical method. Afterward, a parametric study is carried out to investigate the effects of the outer to inner radius ratio, hexagonal core angle, thickness to length ratio of the concrete, the weight fraction of GPLs into concrete, and the thickness of honeycomb core to inner radius ratio on the frequency of the viscoelastic sandwich disk with honeycomb core and FG-GPLRVC face sheet.

• Steel and Composite Structures
• /
• 제17권4호
• /
• pp.517-533
• /
• 2014

Experimental results of 39 specimens including concrete columns, RC columns, hollow steel tube columns, concrete filled steel tubular (CFT) columns, and reinforced concrete filled steel tubular (RCFT) columns are presented. Based on the experimental results, the load-carrying capacity, confined effect, ductility, and failure mode of test columns are investigated. The effects of the main factors such as width-thickness ratio (the ratio of external diameter and wall thickness for steel tubes), concrete strength, steel tube with or without rib, and arrangement of reinforcing bars on the mechanical characteristics of columns are discussed as well. The differences between CFT and RCFT are compared. As a result, it is thought that strength, rigidity and ductility of RCFT are improved; especially strength and ductility are improved after the peak of load-displacement curve.

• Computers and Concrete
• /
• 제32권4호
• /
• pp.425-438
• /
• 2023

In this article, the performance of steel fiber-reinforced concrete (SFRC) flat slabs was investigated numerically. The influence of flexural steel reinforcement, steel fiber content, concrete compressive strength, and slab thickness were discussed. The numerical model was developed using ATENA-Gid, user-friendly software for non-linear structural analysis for the evaluation and design of reinforced concrete elements. The numerical model was calibrated based on eight experimental tests selected from the literature to validate the actual behavior of steel fiber in the numerical analysis. Then, a parametric study of 144 specimens was generated and discussed the impact of various parameters on the punching shear strength, and statistical analysis was carried out. The results showed that slab thickness, steel fiber content, and concrete compressive strength positively affect the punching shear capacity. The fib Model Code 2010 for specimens without steel fibers and the model of Muttoni and Ruiz for SFRC specimens presented a good agreement with the results of this study.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.539-545
• /
• 1997

Since the length of massive wall-structure is generally longer and larger than its thickness and a lift height of concrete of placement, cracks induced by hydration heat are governed by outer structural restriction rather than inner one. However, the degree of restriction control is expected to be affected by the sizes of wall thickness, length and a lift height. Thus, this analytical study aims at the development of relationship among those to minimize thermal cracks. In addition, the effect of types of cement on the thermal heats and stresses is evaluated for anti-sulphate and 2blended Portland cements concrete. It was found from analytical study that a lift height of concrete placement is the most important factor controlling thermal cracks, and the increase of lift heights is not always detrimental to structural safety.

• 콘크리트학회논문집
• /
• 제16권1호
• /
• pp.27-35
• /
• 2004

지금까지 콘크리트에 대한 피로실험과 연구는 대부분 압축응력, 휨응력을 받는 경우에 대하여 연구를 진행하였으나 실제 교량이나 도로 포장콘크리트 구조물은 이축응력상태의 조합응력을 받게 된다. 따라서, 본 연구에서는 이러한 콘크리트 구조체가 받게 되는 이축응력 상태를 이상적으로 재현할 수 있는 쪼갬인장 피로실험방법을 제안하고 적용성을 평가 하고자 하였다. 실험은 ${\phi}15{\times}30cm$를 사용한 KS 규정을 응용하여 ${\phi}15{\times}7.5cm$의 시편을 제작하고, 쪼갬인장 피로실험에 적용하기 위한 타당성 검증을 수행하였으며, 이상적 탄성재료인 강재와 고체의 비교를 위하여 모르타르 시편을 제작하여 검증실험을 수행하였다. 또한, 이론적 고찰과 유한요소 해석을 수행하여 이론치와 해석치의 비교 고찰하였으며 정적 강도측정 및 게이지 부착실험을 수행하여 타당성을 입증하고자 하였다. 실험결과, FEA결과, 수평응력과 압축응력의 비는 3.1로 나타나 이론치 3.0과 유사한 결과를 얻을 수 있었다. 수평응력은 시편의 길이가 30cm일 경우 이론상 3MPa이지만, 본 연구에서는 시편의 길이가 30cm와 5cm일 때 각각 2.98MPa와 2.96MPa로 나타났다. 쪼갬인장 피로실험방법은 유한요소 해석, 정적 강도측정 및 게이지 부착실험모두에서 충분한 타당성을 나타내었으며, 이 방법은 실제 응력 모사, 실험의 간편성, 현장 시편 이용 가능성 등 많은 장점을 가지고 있는 것으로 판단되어 향후 교량이나 도로포장 구조물에 사용되는 콘크리트의 피로거동을 모사하는데 적합한 실험방법으로 사료된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.673-678
• /
• 1997

The main structural system of domestic apartments is the wall-slab system. In such structures, the lack of material strength of wall affects severely on the safety of structures. It is fond frequently that the wall in the apartment structures has lower strength in concrete than the specified. This paper presents the retrofitting method of the reinforced concrete wall with low concrete strength. The tests are performed to investigate the structural behavior and the effects of external reinforcing and thickness increasing on the axial load capacity of walls. Six specimens are tested. As the test results, the external reinforcing method is less effective than thickness increasing method.