DOI QR코드

DOI QR Code

Minimum Thickness of Flat Plate Slab Satisfying Floor Vibration Criteria

수직진동 사용성을 고려한 플랫 플레이트 슬래브의 최소두께 제안

  • 이민정 (한양대학교 대학원 건축공학과) ;
  • 김동현 (한양대학교 대학원 건축공학과) ;
  • 한상환 (한양대학교 건축공학부)
  • Published : 2006.06.01

Abstract

Flat plate slab systems are more economical rather than reinforced concrete frame systems because flat plate slab system reduces story height. Furthermore flat plate systems are more popularly needed in construction practice due to flexibility of plan. Korean Concrete Provisions 2003 provide the minimum thickness of the slab that satisfies serviceability requirement to the static displacement. However, floor thickness in residence buildings may not satisfy the floor vibration criteria although the thickness satisfies the serviceability requirements in current design provisions. This study estimates the dynamic properties of floor vibration for existing flat plate slabs, and proposes the slab thickness satisfying the floor vibration criteria. The dynamic response analysis using finite element method and reliability analysis are carried out for this Purpose.

Keywords

References

  1. American Concrete Institute, 2002, Building Code Requirements for Structural Concrete and Commentary, pp.114 -116
  2. Korea Concrete Institute, 2003, Design Code for Structural Concrete and Commentary, pp. 83 - 85
  3. Architectural Institute of Japan, 1991, Guidelines for the Evaluation of Habitability to Building Vibration, pp. 1 - 10
  4. International Organization For Standardization, 1989, Evaluation of Human Exposure to Whole-body Vibration Part 2: Continuous and Shock-induced Vibration in Buildings, pp. 1 - 11
  5. Lenzen. K. H., 1966, ' Vibration of Steel Joist Concrete Slab Floors,' Engineering Journal, Vol. 3, No. 3, pp. 133 -136
  6. Allen, D. E. and Rainer, J. H., 1976, ' Vibration Criteria for Long-span Floors,' Canadian Journal of Civil Engineering, Vol. 3, No.2, National Research Council of Canada, pp. 165 -173 https://doi.org/10.1139/l76-017
  7. Choi, B. S., Oh, B. H. and Scanlon, A., 2002, 'Probabilistic Assessment of ACI 318 Minimum Thickness Requirements for One-way Members,' ACI Structural Journal, Vol. 99, No.3, pp. 344 - 351
  8. Lenzen, K. H. and Murray, T. M., 1969, ' Vibration of Steel Beam Concrete Slab Floor Systems,' Dept. of Civil Engineering, University of Kansas, Lawrence, Kans., Report No. 29
  9. Lee, M. J. Han, S. W. and Nam, S. W., 2005, 'Probability Based Determination of Slab Thickness Satisfying Floor Vibration Criteria,' Journal of the Korea Concrete Institute, Vol. 17, No.5, pp. 687 - 694 https://doi.org/10.4334/JKCI.2005.17.5.687
  10. Ang A. H-S. and Tang W. H., 1975, Probability Concepts in Engineering Planning and Design-decision, Risk, and Reliability, Vol. I, II, Wiley, pp. 247 - 332
  11. Han, S. W. and Lee, S. W., 2003, ' Investigation on Human Perception Level under Walking and Heel Drop Vibration Using Shaking Table Test,' Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 13, No. 3, pp. 186 - 193 https://doi.org/10.5050/KSNVN.2003.13.3.186