• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1262-1263
• /
• 2008

Recently film-typed dye sensitized solar cell(DSC) attracts much attention with increasing applications for its flexibility and transparency. The ZnO:Al thin film, which serves mainly as transparent conducting electrode, Aluminium-doped zinc oxide(ZnO:Al) thin film has emerged as one of the most promising transparent conducting films since it is inexpensive, mechanically stable, and highly resistant to deoxidation. In this paper ZnO:Al thin film was deposited on the polyethylene terephthalate(PET) substrate by the capacitively coupled r. f. magnetron sputtering method. The effects of gas pressure and r. f. discharge power on the morphological, electrical and optical properties of ZnO:Al thin film were studied. Especially the variation in substrate thickness after sputtering and surface morphology of the substrate were investigated and clarified. The results showed that the film deposited on the PET substrate at r. f. discharge power of 180 W showed the minimum resistivity of about $1.5{\times}10^{-3}{\Omega}-cm$ and a transmittance of about 93%.

• 한국자동차공학회논문집
• /
• 제6권6호
• /
• pp.24-30
• /
• 1998

A directly coupled Boundary Element and Finite Element Model was applied to the dynamic analysis of a coupled acoustic silencer with vibratory wall. In this cupled BEM-FEM muffler model, the BEM model was used to discretize the acoustic cavity and the FEM model was used to discretize the vibratory wall structure. Then the BEM model was coupled with the FEM model. The results of the coupled BEM-FEM model for the dynamic analysis of the simple expansion type reactive muffler configurations with flexible walls were verified by comparing the predicted results to analytical solutions. In order to investigate the effects of the muffler's structural flexibility on its transmission loss(TL) characteristics, the results of the coupled BEM-FEM model in conjunction with the four-pole parameter theory were utilized. The muffler's TL characteristics using the BEM-FEM coupled model with flexible walls as compared to other muffler configurations was studied. Finally the muffler's TL values with respect to different wall's thickness are predicted and compared.

• Steel and Composite Structures
• /
• 제45권5호
• /
• pp.697-713
• /
• 2022

In the context of the finite elements method, the dynamic behavior of porous functionally graded double wishbone vehicle suspension structural system incorporating joints flexibility constraints under road bump excitation is studied and analyzed. The functionally graded material properties distribution through the thickness direction is simulated by the power law including the porosity effect. To explore the porosity effects, both classical and adopted porosity models are considered based on even porosity distribution pattern. The dynamic equations of motion are derived based on the Hamiltonian principle. Closed forms of the inertia and material stiffness components are derived. Based on the plane frame isoparametric Timoshenko beam element, the dynamic finite elements equations are developed incorporating joint flexibilities constraints. The Newmark's implicit direct integration methodology is utilized to obtain the transient vibration time response under road bump excitation. The presented procedure is validated by comparing the computational model results with the available numerical solutions and an excellent agreement is observed. Obtained results show that the decrease of porosity percentage and material graduation tends to decrease the deflection as well as the resulting stresses of the control arms thus improving the dynamic performance and increasing the service lifetime of the control arms.

• 대한기계학회논문집A
• /
• 제36권2호
• /
• pp.173-178
• /
• 2012

최근 RFID, 유연디스플레이, 태양전지, 전자 종이 등의 소자를 프린팅 방식을 이용하여 생산하려는 연구가 활발하게 진행 되고 있다. 이런 방식이 기존의 노광기술과 식각기술에 의존하는 반도체 공정에 비해 가격 경쟁력에서 우수하기 때문이다. 특히 RFID, 유연디스플레이, 태양전지, 전자 종이 등은 유연성과 대량생산을 필요로 하기 때문에 롤투롤(roll to roll)공정과 같은 저가격화, 대형생산화에 관심이 집중되고 있다. 이 롤투롤 기술을 사용하기 위해서는 인쇄 패턴의 빠른 구현, 표면 균일도, 두께 등의 높은 인쇄 품질이 보장 되어야 한다. 본 연구는 실험계획법(Design of Experiment)을 적용하여 인자들의 주효과와 교호작용 효과를 분석하고, 롤투롤 전자인쇄 시스템에서 닙 롤의 특성에 따른 인쇄 품질의 영향과 인쇄 품질의 향상 방안을 찾기 위한 매칭기술을 제안 하였다.

• Structural Engineering and Mechanics
• /
• 제58권1호
• /
• pp.59-91
• /
• 2016

Laminated composite shells are commonly used in various engineering applications including aerospace and marine structures. In this paper, using semi-analytical finite strip method, the buckling behavior of laminated composite deep as well as thick shells of revolution under follower forces which remain normal to the shell is investigated. The stiffness caused by pressure is calculated for the follower forces subjected to external fibers in thick shells. The shell is divided into several closed strips with alignment of their nodal lines in the circumferential direction. The governing equations are derived based on first-order shear deformation theory which accounts for through thickness-shear flexibility. Displacements and rotations in the middle surface of shell are approximated by combining polynomial functions in the meridional direction as well as truncated Fourier series with an appropriate number of harmonic terms in the circumferential direction. The load stiffness matrix which accounts for variation of loads direction will be derived for each strip of the shell. Assembling of these matrices results in global load stiffness matrix which may be un-symmetric. Upon forming linear elastic stiffness matrix called constitutive stiffness matrix, geometric stiffness matrix and load stiffness matrix, the required elements for the second step analysis which is an eigenvalue problem are provided. In this study, different parameter effects are investigated including shell geometry, material properties, and different boundary conditions. Afterwards, the outcomes are compared with other researches. By considering the results of this article, it can be concluded that the deformation-dependent pressure assumption can entail to decrease the calculated buckling load in shells. This characteristic is studied for different examples.

• 한국식품영양과학회지
• /
• 제32권6호
• /
• pp.859-863
• /
• 2003

기능성 고품질 어묵의 개발을 위하여 항암성 및 혈압강하능을 가지고 잇는 표고버섯(Lentinus edodes)을 각각 0, 5, 10, 15 및 20% 첨가한 튀김 어묵을 제조한 다음 색도 변화 및 절곡검사, 물성 특성, 관능적 특성을 조사하였다. 어묵의 색도는 표고버섯의 함유량이 증가할수록 L값은 감소하는 경향, a값은 증가하는 경향, b값도 대체로 증가하는 경향을 나타내었다. 또한, 어묵의 유연성을 나타내는 절곡검사의 결과로는 모든 시료에서 AA로 측정되 어 표고버섯의 첨가에 관계없이 우수한 것으로 나타났다. 표고버섯 첨가 어묵의 물성측정 결과에서, 20%의 표고버섯을 함유한 어묵에서 강도, 경도, 탄성, 껌성 및 파쇄성이 가장 높게 관찰되었고 관능검사의 결과로는 어묵의 색도와 향기 부문에서는 표고버섯의 특유의 향이 강하므로 5% 첨가군에서 선호도가 높았으며, 맛과 조직감, 전체적인 선호도의 경우에서는 10%의 표고버섯이 첨가된 경우가 가장 높았다. 이상의 결과와 같이 표고버섯을 함유한 고품질 어묵의 제조 가능성을 확인하였다.

• Composites Research
• /
• 제20권3호
• /
• pp.50-54
• /
• 2007

본 연구에서는 IPMC의 기본적인 기계적 특성을 알아보았다. 기전폴리머의 한 종류인 IPMC는 굽힘형 작동, 가벼움, 저전력 소모, 유연성 등의 많은 장점을 가진 재료이다. 따라서 IPMC는 생체모방형 작동기와 센서로서 많은 가능성을 가지고 있다. 이런 가능성을 바탕으로 IPMC를 실제로 응용하기 위하여 IPMC의 변형, 구동력, 주파수 응답 등 기본적인 기계적 특성을 연구하였다. 우선 이온교환폴리머의 한 종류인 네피온 용액을 사용하여 여러 가지 두께의 네피온 막을 만들고, 무전해 도금을 통해 IPMC를 제작하였다. 이렇게 제작된 IPMC의 규격, 인가 전압에 따른 변형, 구동력, 주파수 응답 특성에 관한 실험을 수행하고, 실험 결과를 통해 IPMC 성능의 실험식과 등가 강성 모델을 수립하였다.

• 한국학교보건학회지
• /
• 제16권1호
• /
• pp.149-160
• /
• 2003

The purpose of this study was to analyze the effects after having the obesity education with obese elementary school children. The subjects were made up of 31 obese children out of U elementary school in B town as experimental group, and also were selected 34 children out of S elementary school under the same circumstance as control group. They ranged from the third to sixth grades with over 30% body fat ratio. The proceeding of obesity education consisted of three stage; stage for preparation, stage for practice, and stage for finish. The stages mentioned above were put into practice in turn for eleven weeks beginning on Oct. 8, 2001 through Dec. 22, 2001, while two stages only, stage for preparation and finish, were put into practice on the control group. The contents of the education for eleven weeks obesity regulation contained counseling and taking regular exercises once a week by professional gym teacher. In order to evaluate the effects of the education, physical characteristics, body composition, physical fitness, knowledge of obesity, dietry habit and attitude were measured. The obtained data were analyzed using SPSS program, the effects of pre and post obesity education in experimintal group were measured by paired-t test. The conclusions of this study were as follows : 1. Body fat ratio was significantly reduced after obesity education in experimintal group(p=.003). 2. The height with experimental group got taller remarkably(p=.000), but weight showed no signeficance after obesity education(p=.258). 3. Triceps and subscapular skinfold thickness showed remarkable decrese after obesity education(p=.000), percentage body fat and body fat amount got down remarkably after obesity education(p=.000). Percentage lean body mass and lean body mass amount got down remarkably after obesity education(p=.000). 4. Body flexibility, agility and muscle endurance graded up remarkably after obesity education(p=.009, p=.000, p=.000). 5. The grade in obesity knowledge got up remarkably after obesity education(p.000), but dietry habits and its life showed no significance in figures after obesity education(p=.335, p=.112). Through the results shown above, the obesity education caused body fat ratio, physique, body composition to grade up and physical fitness elevated, while dietry habits and its life showed no significance.

• Tribology and Lubricants
• /
• 제32권3호
• /
• pp.75-81
• /
• 2016

Future electronics such as electronic paper and foldable cellphone are required to be flexible and transparent and should have a high performance. In order to fabricate the flexible electronics using flexibility transfer process, techniques for transferring various devices from rigid substrate onto flexible substrate by elastomeric stamp, have been developed. Adhesion between the elastomeric stamp and various devices is crucial for successful transfer process. The adhesion can be controlled by the thickness of the stamp, separation velocity, contact load, and stamp surface treatment. In this study, we fabricated the bump shape stamp consisting of a UV-curable polymer and investigated the effects of curing condition, separation velocity, and contact load on the adhesion characteristics of bumps. The bumps with hemispherical shape were fabricated using a dispensing process, which is one of the ink-jet printing techniques. Curing conditions of the bumps were controlled by the amount of UV irradiation energy. The adhesion characteristics of bumps are evaluated by adhesion test. The results show that the pull-off forces of bumps were increased and decreased as UV irradiation energy increased. For UV irradiation energies of 300 and 500 mJ/cm², the pull-off forces were increased as the separation velocity increased. The pull-off forces also increased with the increase of contact load. In the case of UV irradiation energy above 600 mJ/cm², however, the pull-off forces were not changed. Therefore, we believe that the bump shape stamp can be applied to roll-based transfer process and selective transfer process as an elastomeric stamp.

• 한국지반공학회논문집
• /
• 제39권11호
• /
• pp.7-22
• /
• 2023

최근 지하안전에 관한 특별법이 시행(2022년 1월)되었으며, 지하안전영향평가를 통해 계획단계부터 지하안전에 관한 사전검토가 실시되고 있다. 지하굴착을 위해서는 가설 흙막이의 구조 안전성을 확보하는 것이 중요하므로 지하안전 검토는 더욱 강화되고 있다. 본 연구에서는 토사지반에서 Soil-Cement 흙막이의 벽체 두께를 확대하고 H-pile의 선택과 설치간격을 자유롭게 할 수 있는 MFS(Multi-axis Flat Continuous Soil Cement Earth Retaining Wall) 흙막이 벽체 공법의 거동 특성을 분석하였다. 실내모형실험을 통해 MFS 공법의 H-pile 설치간격에 따른 벽체에 작용하는 하중-변위 거동을 확인하였으며, MFS 흙막이 벽체의 두께별 H-pile 설치간격 및 크기 변화에 따른 하중-변위를 3차원 수치해석으로 분석하여 벽체에 작용하는 아칭효과 높이를 산정하였다. MFS 공법에서 산정한 최대 아칭높이를 기존의 부재력 검토 방법에 적용하여 벽체에 작용하는 축력, 전단력을 정량적으로 분석하는 설계방법을 제시하였다. 그 결과 MFS 흙막이 벽체에 적용되는 H-pile 설치 간격 및 크기에 따른 축력 및 전단력이 24.6~62.9%가 저감하는 것을 확인하였다.