• Food Science of Animal Resources
• /
• v.28 no.5
• /
• pp.610-615
• /
• 2008

This experiment was conducted to investigate the effects of drinking of Rhus tree-extract on laying performance and egg quality in hens. Four hundred eighty, 55-wk-old ISA brown, laying hens were divided into six groups, control, Rhus tree-extract 500 ppm, 1,000 ppm, 2,000 ppm, 3,000 ppm and 5,000 ppm. The hens were fed a supplemented drink containing Rhus tree-extract for 12 weeks. Egg production and egg mass increased by drinking Rhus tree-extract (p<0.05) and the feed conversion ratio also improved in Rhus tree-extract groups. Cecal numbers of Lactobacillus spp., E. coli and Salmonella were not different in treatments. Availability of protein and ash improved in the Rhus extract groups. The eggshell breaking strength and egg shell thickness were significantly increased in Rhus tree-extract 3,000 ppm and Rhus tree-extract 2,000 ppm groups compared to the other groups. Also, egg yolk color and Haugh unit were significantly improved by the dietary Rhus tree-extract (p<0.05).

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Journal of Life Science
• /
• v.24 no.8
• /
• pp.851-859
• /
• 2014

The present study was designed to investigate whether ethanol extracts of Sophora flavescens (GS), Glycyrrhiza uralensis (GC), Dictamnus dasycarpus (BSP), and their mixtures (GGB-1, -2, -3, and -4) inhibit 1-chloro-2,4-dinitrobenzene (DNCB)-induced atopic dermatitis (AD) in a mouse model. DNCB was topically applied on the dorsal surface of Balb/c mice to induce AD-like skin lesions. The pathological phenotypes of AD, such as erythema, ear thickness, edema, scabs, and discharge, were significantly decreased in the GGB (DNCB + GS:GC:BSP = 3:1:1 mixture)-1-treated groups compared with the other treated groups. The weight of the spleen in immune organs was significantly decreased in the GGB-1-treated groups, whereas the weight of the liver in a control group was similar to that of the groups treated with the samples. Furthermore, toluidine blue staining analysis, a method used to specifically identify mast cells, showed that master cell infiltration into the dermis of the GGB-1-treated group was significantly decreased. The immunoglobulin E concentration was lower in the GGB-1-treated group. In addition, the levels of inflammatory cytokines (interferon-${\gamma}$, interleukin-1, 4, 5, 6, and 13, $1{\beta}$, and tumor necrosis factor-${\alpha}$) were also significantly reduced in the GGB-1-treated group. Taken together, these results suggest that a mixture of GS, GC, and BSP in a proportion of 3:1:1 (GGB-1) may contribute to the relief of AD symptoms and may be considered an excellent candidate for an AD therapeutic drug.

• Journal of Korea Water Resources Association
• /
• v.41 no.12
• /
• pp.1219-1230
• /
• 2008

Stream inflows induced by flood runoffs have a higher density than the ambient reservoir water because of a lower water temperature and elevated suspended sediment(SS) concentration. As the propagation of density currents that formed by density difference between inflow and ambient water affects reservoir water quality and ecosystem, an understanding of reservoir density current is essential for an optimization of filed monitoring, analysis and forecast of SS and nutrient transport, and their proper management and control. This study was aimed to quantify the characteristics of inflow density current including plunge depth($d_p$) and distance($X_p$), separation depth($d_s$), interflow thickness($h_i$), arrival time to dam($t_a$), reduction ratio(${\beta}$) of SS contained stream inflow for different flood magnitude in Daecheong Reservoir with a validated two-dimensional(2D) numerical model. 10 different flood scenarios corresponding to inflow densimetric Froude number($Fr_i$) range from 0.920 to 9.205 were set up based on the hydrograph obtained from June 13 to July 3, 2004. A fully developed stratification condition was assumed as an initial water temperature profile. Higher $Fr_i$(inertia-to-buoyancy ratio) resulted in a greater $d_p,\;X_p,\;d_s,\;h_i$, and faster propagation of interflow, while the effect of reservoir geometry on these characteristics was significant. The Hebbert equation that estimates $d_p$ assuming steady-state flow condition with triangular cross section substantially over-estimated the $d_p$ because it does not consider the spatial variation of reservoir geometry and water surface changes during flood events. The ${\beta}$ values between inflow and dam sites were decreased as $Fr_i$ increased, but reversed after $Fr_i$>9.0 because of turbulent mixing effect. The results provides a practical and effective prediction measures for reservoir operators to first capture the behavior of turbidity inflow.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.11
• /
• pp.1612-1620
• /
• 2015

Inflammation is a complex process involving a variety of immune cells, which defend the body from harmful stimuli. However, pro-inflammatory cytokines and inflammatory mediators can also exacerbate diseases such as cancer. Onion peel contains several phenolic compounds, including quercetin at an amount 20 times greater in peel than edible flesh. Therefore, in this study, the anti-inflammatory effects of onion peel ethanol extract (OPEE) were investigated lipopolysaccharide-induced inflammatory response. In our results, NO production decreased in a dose-dependent manner. Secretion of IL-6, $TNF-{\alpha}$, and $IL-1{\beta}$ was suppressed by 44%, 53%, and 60% respectively, at $100{\mu}g/mL$. Moreover, OPEE also suppressed expression of COX-2, iNOS, $NF-{\kappa}B$, and MAPKs in a dose-dependent manner. Formation of mice ear edema was reduced at the highest dose tested compared to the control, and reduction of ear thickness was observed in the histological analysis as well. In the acute toxicity test, no morality was observed in mice administered 5,000 mg/kg body weight of OPEE over a 2-week observation period. These results suggest that OPEE may have significant effects on inflammatory factors and be a potential anti-inflammatory material.

• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.85-95
• /
• 2001

The purpose of this study was to evaluate the material for fixed type retainer, allowing physiologic tooth movement. and proper remodeling or periodontal tissue during retention period. The Present study was Performed to observe the histologic changes of periodontal tissue after application of different types of fixed type retainer after orthodontic tooth movement in young adult dogs. For this study, 4 young adult dogs were used as a experimental animal and experimental group was divided into three groups : experimental group 1 contained right side maxillayy third incisors and canines, experimental group 2 contained contralateral teeth of same animals, and control group contained mandibular premolars. And each dogs were applied the 4 different types of fixed type retainer to experimental group 1. The experimental teeth were ligated on the Sentalloy closed coil $spring^{\circledR}$(Tomy Co., Japan) from maxillary third incisors and canines and applied orthodontic force at initial 200gm-forced during 1 week. All the experimental animals were sacrificed on the 3rd week after the orthodontic teeth movement and then the specimens were taken, fixed in formalin, embeded in parafin, sectioned $6-8{\mu}m$ in thickness and stained with Hematoxylin-Eosin staining, and Masson's trichrome staining method. Examined under the light microscopy The following results were observed. 1. There were observed that decreased infiltration of giant tells in pressure side and increased the new bone forming in tension side on the specimen of 6-stranded 0.0195' $Respond^{\circledR}$(G&H Co., U.S.A.) group. Periodontal ligament fibers were much compressed or elongated in 3-stranded 0.018', 0.020' $Dentaflex^{\circledR}$(Dentarum Co., Germany), and Superbond $C&B^{\circledR}$(Sun Medical Co., Japan) groups. 2. In experimental group 1, necrotic bone inside the alveolar bone of pressure side, forming of the sharpey's fiber in osteoid tissue, and remodeling of the periodontal ligament were observed in all animals. 3. In experimental group 2, it was observed that the amount of bone resorption was equal or decreased in pressure side, and increased new bone forming and significantly decreased infiltration of giant cell than the experimental group 1. By this results, it considered that 6-stranded $Respond^{\circledR}$(G&H Co., U.S.A.) wire was the most useful material allowing early periodontal tissue remodeling.

• Korean Journal of Agricultural Science
• /
• v.41 no.3
• /
• pp.213-220
• /
• 2014

This study was conducted to evaluate the effects of high n-3 or n-6 diet on free fatty acid profile and meat quality traits of pork loin. The 20 heads of commercial $Landrace{\times}Yorkshire{\times}Duroc(LYD)$ crossbreed pigs ($90.9{\pm}2.4BWkg$) were divided into four groups by added fat and oils, such as 5% tallow (Control), 5% linseed oil (T1), 5% safflower oil (T2), and mixture of linseed oil (2.5%) + safflower oil (2.5%) (T3), then reared 4 weeks. Pork loins were taken after slaughter, then sliced in 2 cm thickness and put in low-density polyethylene (LDPE) bag for analysis. T1 showed significantly high concentration of linolenic acid ($2.35{\pm}0.21%$) (p<0.05). The total amount of saturated fatty acids (SFA), mono-unsaturated fatty acids (MUFA) and poly-unsaturated fatty acid (PUFA) was significantly high in T1 ($36.05{\pm}1.18%$), C ($22.60{\pm}2.11%$) and T2 ($47.80{\pm}1.29%$), respectively (p<0.05). However, the ratio of n-6:n-3 was significantly low in T1 ($11.57{\pm}0.90$) than that of T2 ($37.56{\pm}12.51$) (p<0.05). There was no signigicant difference in lightness, redness, pH, water holding capacity and cooking loss between treatments (p>0.05). However, the yellowness of T2 was significantly higher than others (p<0.05). From those results, it was considered that feeding high n-3 and n-6 fatty acid diet to pig enables modify fatty acid profile of pork without any side effect on meat quality.

• Journal of Life Science
• /
• v.21 no.12
• /
• pp.1732-1739
• /
• 2011

This study was carried out to investigate the effect of lotus root and leaf powder on the quality characteristics of pork patty stored at $3^{\circ}C$ for 9 days. The pork patties were of four types: nothing added(control, T0), 0.5% lotus root powder added (T1), 0.25% lotus root and 0.25% lotus leaf powder added (T2), and 0.5% lotus leaf powder added (T3). The $a^*$ value tended to decrease with longer storage period (p<0.05). The $L^*$ and $a^*$ value of T3 had the lowest value among the samples, the $b^*$ value T2 and T3 were higher than those of T0 and T1 (p<0.05). Water holding capacity decreased with longer storage period (p<0.05), the water holding capacity, cooking loss, increase rate of thickness and decrease rate of diameter were not significantly different among the samples. Hardness and chewiness increased and springiness decreased with longer storage period (p<0.05). The pH creased with longer storage period (p<0.05), but the VBN content not changed during storage. The TBARS values increased with longer storage period (p<0.05), and those of T0, T1, T2 and T3 were 4.57, 1.85, 0.43 and 0.41 mg MA/kg, respectively, after 9 days of the storage. The result suggest that the addition of lotus root and leaf powder at the same time, or addition of lotus leaf powder can be applied to pork patty to its functionality.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.5 s.21
• /
• pp.183-192
• /
• 2004

Even in Korea the number of steel structure buildings that allow internal space and easy change of their layouts in accordance with the purpose of buildings and box-type steel bridges constructed with thick plates with thickness in a rage just from a few $\beta$AE to \$100\beta$AE is increasing these days and therefore, domestic fabrication and processing technology of members for steel structures is being improved at a pace faster than in the past to meet the growing requirements of consumers for high reliability on quality control on the related steel structures. However, most domestic fabricators os steel structures who are turning out their steel products in accordance with the designs prepared by engineering companies in their respective works for the sake of cost cut more than anything else, hesitating to introduce any advanced new technology into themselves. In the case of the steel structure design application for small and mid-size buildings in particular, it is quite meaningful not only for those who are involved in steel structure business, but also for the people working at construction work fields to review the result of the study on the connections of steel structure members deigned to obtain superb quality of steel structures within short period for steel fabrication and erection at fields in economical ways, as there is a glowing tendency seeking standardization of connection of steel structure members as well as whole structure together with the development on design of construction system of buildings including their exterior and interior decoration materials, manufacture of the related members and fabrication technique structure. This paper has been prepared with the aim to review the peculiar characteristics of buildings constructed with the main frames of steel structures and actual cases of the change made ing the connections between steel structure columns and between columns and girder members in order to reduce the work period necessary for fabrication and erection of steel structures at the maximum as well as the some examples of steel structures fabricated through automatic welding by robots for box-type columns in addition to the description of the problems found in the course of fabricating those steel structures, suggesting possible counter-measures to solve them.

• Journal of Animal Science and Technology
• /
• v.49 no.4
• /
• pp.471-480
• /
• 2007

The aim of the present study was to determine the effects of a low-energy finisher diet on feed and growth efficiencies and carcass traits of ‘high’-market weight (MW) finishing pigs and thereby to extrapolate optimal dietary energy level for the high-MW swine. A total of 160 (Yorkshire × Landrace) × Duroc-crossbred finishing gilts and barrows weighing approximately 90 kg were fed a low-energy (3,200 kcal DE/kg) diet (LE) or control (3,400 kcal) diet (CON) ad libitum in 16 pens up to 135- and 125-kg live weights, respectively, at which the animals were slaughtered and their carcasses were analyzed [2 (sex) × 2 (diet) factorial experimental design]. Average daily gain, average daily feed intake and feed efficiency did not differ between the two sex or diet groups. Backfat thickness was less (P<0.05) in LE (22.4 mm) than in CON group (24.3 mm) in gilts, but not in barrows (24.4 ± 0.4 mm). The percentage of C- & D-grade carcasses was over 90% because of the ‘over-weight’ problem in gilts, whereas in barrows, percentages of A plus B grades and C plus D grades were 79% and 21%, respectively. The yield percentage of each trimmed primal cut per total trimmed cuts (w/w) did not differ between the two sex or diet groups. Physicochemical characteristics of longissimus muscle including color (lightness and redness), pH, drip loss and chemical composition, which overally were within the range of normal carcass, also did not differ between the two sex or diet groups. In conclusion, both LE and CON are judged to be adequate for the high-MW swine during the latter finishing period. If fat deposition of a given herd of high-MW pigs needs to be suppressed by a dietary treatment, the energy content of the diet will have to be reduced to a level lower than 3,200 kcal DE/kg.