• 제목/요약/키워드: thickness changes

검색결과 1,707건 처리시간 0.027초

내과 환자의 입원후 영양상태 변화 연구 (Changes in Nutritional Status of General Medical Patients During Hospitalization)

  • 양영희;최스미;김은경
    • 대한간호학회지
    • /
    • 제27권1호
    • /
    • pp.49-60
    • /
    • 1997
  • The purpose of this study was to determine the incidence of malnutrition among patients on admission to hospital, to monitor changes in their nutritional status during hospitalization, and to determine the factors which might affect changes in nutritional status. The subjects for the study were patients who were admitted to general medicine for more than one week. Patients suffering from cardiovascular. renal disease, or dehydration were excluded. Nutritional assessment of the patients was performed on admission and nutritional status was reassessed one week and two weeks after admission. The nutritional assessment tool consisted of subjective history taking and anthropometric measurements. Biochemical measurements were performed only on admission. For anthropometric assessment : patients' body weight, subcutaneous skinfolds thickness, % of body fat, body mass index, and lean body mass were measured using caliper or Bio impedance Analyzer. Factors which might influence current nutritional status, like dietary intake, anorexia, nausea, vomiting, diarrhea, sleep disturbance, and number of days of NPO for diagnostic examinations were analyzed. The results are as follows : 1. Of the 59 patients who were studied, 61% were male and 39% female. The nutritional status of all of the 59 subjects was reassessed one week after admission, but it was only done for 22 subjects at two weeks. 2. The anthropometric measurements. including weight body mass index, lean body mass, body fat. and skin fold thickness. were all significantly decreased at one week after admission compared to the values at admission. On the other hand, two weeks after admission, only body weight and abdominal skinfolds thickness were decreased. 3. The subjects reported anorexia for an average of two days, sleep disturbance for two days, and no food intake due to diagnostic test for one day. In the second week of hospitalization, almost none of the patients complained of gastrointestinal symptoms or sleep disturbance except anorexia. Food consumption which was measured based on rice intake was 60% of the food served during the first week of hospitalization, and 66% during the second week of hospitalization. 4. There was no correlation between the subjective nutritional assessment and anthropometric assessment. 5. There was no statistical significance in anthropometric measurements among the patients with various diseases whereas sleep disturbance and no food intake due to various diagnostic test was prominent in patients with gastrointestinal diseases.

  • PDF

Stability of dental, alveolar, and skeletal changes after miniscrew-assisted rapid palatal expansion

  • Lim, Hyun-Mook;Park, Young-Chel;Lee, Kee-Joon;Kim, Kyung-Ho;Choi, Yoon Jeong
    • 대한치과교정학회지
    • /
    • 제47권5호
    • /
    • pp.313-322
    • /
    • 2017
  • Objective: Miniscrew-assisted rapid palatal expansion (MARPE) is a means for expanding the basal bone without surgical intervention in young adults. Here, we assessed the differences in dental, alveolar, and skeletal measurements taken before (T0), immediately after (T1), and 1 year after (T2) MARPE. Methods: Twenty-four patients (mean age, 21.6 years) who had undergone MARPE and cone-beam computed tomography at T0, T1, and T2 were included. Changes in the following parameters were compared using paired t-tests: intercusp, interapex, alveolar, nasal floor, and nasal cavity widths; inclination of the first molar (M1) and its alveolus; and thickness and height of the alveolar bone. A linear mixed-effects model was used to determine variables that affected periodontal changes in the M1. Results: MARPE produced significant increases in most measurements during T0-T2, despite relapse of some measurements during T1-T2. The alveolar thickness decreased on the buccal side, but increased on the palatal side. The alveolar crest level at the first premolar moved apically. Changes in the thickness and height of the alveolar bone were affected by the corresponding initial values. Conclusions: MARPE can be used as an effective tool for correcting maxillomandibular transverse discrepancy, showing stable outcomes 1 year after expansion.

Angle씨 제 3 급 부정교합 환자 치료 전후의 안모 연조직 변화에 관한 두부방사선 계측학적 연구 (A ROENTGENOCEPHALOMETRIC STUDY ON SOFT TISSUE PROFILE CHANGES IN PRE-POST TREATMENT OF ANGLE'S CLASS III MALOCCULUSION)

  • 김재우;손병화
    • 대한치과교정학회지
    • /
    • 제13권2호
    • /
    • pp.177-183
    • /
    • 1983
  • The soft tissue covering of the face plays an important role in facial esthetics, speech and other physiologic functions. Thus, it is recognised by all clinical orthodontists that success of orthodontic treatment is closely related to the changes in soft tissues of the face. The purpose of this study was to evaluate the changes of bony and soft tissues in prepost treatment of Angle's Class III malocclusion. The sample consisted of 18 males and 37 females, pretreatment age of 9 years to 11 years. For this study 11 landmarks were plotted, 14 linear length, 4 soft tissue thickness and 2 angles were measured. The obtained results were as follows; 1. In the linear measurements of bony and soft tissue changes, A, Is, Ss, Ls and Li were located more anteriorly in both sexes. However Si and B showed more remarkable anterior movement in female. 2. In the comparison of the changes of the soft tissue thickness, Ss and Li in male subjects and Ss in female subjects increased. 3. In the degree of correlation between changes in the soft tissue profile and changes in the skeletal profile, Is: Ls, Il: Li and B: Si in both sexes had significant correlations. However A:Ss had remarkable significant correlation in female. 4. There were significant correlations between change in ${\angle}A$ and change in ${\angle}B$ in all sexes. 5. There were little correlation between changes in distance difference of Is and Ii and Change in distance difference of Ls and Li in all sexes.

  • PDF

임플란트 보철의 교합 접촉 변화에 대한 임상적 평가 (Clinical Evaluation of Occlusal Contact Changes in Implant Prosthesis)

  • 윤철희;김대곤;이양진;조리라;박찬진
    • 구강회복응용과학지
    • /
    • 제23권1호
    • /
    • pp.21-30
    • /
    • 2007
  • Despite of the successful clinical performance of implants, it is still lacking of the knowledge of changes in implant occlusion. The purpose of this study was to evaluate the changes of infraocclusal contact after clinical occlusal function of implant. Twenty patients(38 implants) were recalled during 10 months after placement of implant prosthesis. Occlusion changes were investigated at placement, placement 1 months, 4 months and 10 months serially with silicone bite material and T-Scan II sensor. Bony changes were also evaluated with periapical radiographs. The changes of silicone thickness and T-Scan II sensored areas were statistically analyzed with repeated measured ANOVA and the Scheffe's post-hoc test at the 95% significance level. The following results have been made based on this study: 1. Alveolar bone loss was within 0.20mm and it was generally concluded within physiologic level. 2. There were no statistically significant differences in the thickness changes of silicone material at 1 month and 4 months of occlusal function. However, there was statistically significant difference at 10 months of occlusal function (p<0.05). 3. There was no statistically significant difference in changes of occlusal contact area in T-Scan II at 1 month and 4 months of occlusal function, but there was statistically significant difference at 10 months of occlusal function (p<0.05). Conclusively, as time goes by, implant occlusion to be formed infraocclusion was to be far close and increased occlusal contact. However, it was not observed destructive bone resorption in periapical radiographs and any other side effects.

마사지가 좌골신경 절단 마우스의 골격근에 미치는 영향 (Effect of Massages on The Skeletal Muscles of Sciatic Nerve Neurectomized ddY Mice)

  • 김철용;김성학;박상옥;배성수;박래준
    • The Journal of Korean Physical Therapy
    • /
    • 제15권2호
    • /
    • pp.19-51
    • /
    • 2003
  • To demonstrate the effect of massages on the skeletal muscles of immobilization ddY mice models induced by right side sciatic nerve neurectomy, the cross sectional histological profiles of the muscularis (M) gastrocnemius, M. tibialis cranialis and M. tibialis caudalis were observed after 28 days of treatment of massages with the changes of body weight, thickness of hind limb and individual muscle weights. In addition, changes of serum aspartate amino- transferase (AST) and creatine phosphokinase (CK) levels were also demonstrated with diameter of individual muscle fiber and muscle fasciculata, and number of muscle fiber in each of three types of muscles located in the calf. The experimental groups were divided into five groups, 1) Sham-operated group (Sham), 2) Neurectomized but not massage control group (Control), 3) Neurectomized and massage at knee joint regions (T1), 4) Neurectomized and massage at calf regions (T2), and 5) Neurectomized and massages at achilles tendon regions (T3). The experimental animals were used 5 per groups. The results are as follow: 1. No significant changes of body weight were demonstrated in this groups during whole experimental periods compared to that of Sham group. In addition, no significant changes of body weight gains during experimental periods (Day 0 - Day 27: 28 days of treatment) were also observed. 2. The thickness of intact left side hind limb was not changes in all tested groups compared to that of Sham group. However, the thickness of right side hind limb were remarkedly decreased in Control, T1, T2 and T3 groups compared to that of Sham group. In addition, the differences of thickness of hind limb between right and left sides were also significantly increased in Control and massage groups (T1, T2 and T3) compared to that of Sham group. However, the thickness of right side of hind limb were significantly increased and the differences of thickness between both sides of hind limb were dramatically decreased in massage groups compared to that of Control group in followed order: T1 > T3 > T2. 3. Absolute and relative weight of M. gastrocnemius in the intact left side of hind limb was not changes in all tested groups compared to that of Sham group. However, the weight of right side M. gastrocnemius were remarkedly decreased in Control, T1, T2 and T3 groups compared to that of Sham group. In addition, the differences of weight of M. gastrocnemius between right and left sides were also significantly increased in Control and massage groups compared to that of Sham group. However, the weight of right side M. gastrocnemius were significantly increased and the differences of weight between both sides of M. gastrocnemius were dramatically decreased in massage groups compared to that of Control group in followed order: T3 > T1 >. 4. Absolute and relative weight of M. tibialis cranialis in the intact left side was not changes in all tested groups compared to that of Sham group. However, the weight of right side M. tibialis cranialis were remarkedly decreased in Control, T1, T2 and T3 groups compared to that of Sham group. In addition, the differences of weight of M. tibialis cranialis between right and left sides were also significantly increased in Control and massage groups compared to that of Sham group. However, the weight of right side M. tibialis cranialis were significantly increased and . the differences of weight between both sides of M. tibialis cranialis were dramatically decreased in massage groups compared to that of Control group in followed order: T3 > T1 > T2. 5. Absolute and relative weight of M. tibialis caudalis in the intact left side was not changes in all tested groups compared to that of Sham group. However, the weight of right side M. tibialis caudalis were remarkedly decreased in Control, T1, T2 and T3 groups compared to that of Sham group. In addition, the differences of weight of M. tibialis caudalis between right and left sides were also significantly increased in Control and massage groups compared to that of Sham group. However, the weight of right side M. tibialis caudalis were significantly increased and the differences of weight between both sides of M. tibialis caudalis were dramatically decreased in massage groups compared to that of Control group in followed order: T3 > T1 > T2. 6. A significant increase of serum AST levels were demonstrated in Control group. However, serum AST levels of massage groups were significantly decreased compared to that of Control group in followed order: T3 > T1 > T2. In case of 73 group, the values decreased into similar levels compared to that of Sham group. 7. A significant increase of serum CK levels were demonstrated in Control group. However, serum CK levels of massage groups were significantly decreased compared to that of Control group in followed order: T3 > T1 > T2.

  • PDF

시판 한복지의 열.수분이동 특성 (Heat ,rind Moisture Transfer Properties of Fabrics for Korean Folk Clothes)

  • 성수광;성은정
    • 한국의류학회지
    • /
    • 제20권6호
    • /
    • pp.1071-1083
    • /
    • 1996
  • This study was carried out to obtain some fundamental data for designing thermally comfortable Korean folk clothes (KFC) which were classified into 4 groups according to seasons and materials. It was conducted to find the relationship among structural, thermal, and moisture transfer properties, and then the properties of heat and mositure transfer while changing thickness of air layer of selected similar fabrics with various thickness were examined. The summarized results of this study were as follows ; 1. The relationship between the structrual and thermal properties showed high positive correlation with thickness SE thermal insulation value (TIV), porosity & TIV. 2. The relationship between the structural and mositure transfer properties showed high negative correlation with thickness & moisture vapor permeability (Mp), porosity & Mp respectively. 3. The relationship between the heat and moisture transfer properites showed high negative correlation with qmax, air permeability (Ap), Mp & TIV while showed high positive with Ap & Mp respectively. 4. Resistance to dry heat transfer according to thickness of air layer for KFC was increassed rapidly up to 2 mm and above this increasing rate was reduced. Resistance to evaporative heat transfer was remarkable changes in 6∼8 mm but slowly in 6∼8 man. 5. Mioisture permeability index (i) according to thickness of air layer for KFC showed the greatest value at 2 mm but had not difference between groups according to thickness.

  • PDF

지지면에 따른 호흡운동 기법이 배근육 두께에 미치는 영향 (Effect of the Breathing Methods in Accordance with Surfaces during Bridging Exercises)

  • 배원식;이건철
    • 대한물리의학회지
    • /
    • 제11권2호
    • /
    • pp.33-40
    • /
    • 2016
  • PURPOSE: The purpose of this study was to determine the impact of stable and unstable surfaces on abdominal muscle thickness and changes in trunk muscle thickness in accordance with breathing methods during bridging exercises. METHODS: Bridging exercise on a stable surface, bridging exercise on an unstable surface, bridging exercise using a drawing-in maneuver on a stable surface, bridging exercise using a drawing-in maneuver on an unstable surface, bridging exercise using bracing on a stable surface, bridging exercise using bracing on an unstable surface. In sequence, the muscles' thickness was measured three times before and after each exercise, and the measured value was averaged. RESULTS: There were significant differences in internal oblique and transversus abdominis muscles' thickness in the drawing-in maneuver in both stable and unstable surface (p<0.05). There were no significant differences in external oblique muscle's thickness in the bridging exercise in both stable and unstable surface. The type of surface did not have a significant influence on the abdominal muscles' thickness. CONCLUSION: As a result of the study, the drawing-in maneuver had a greater effect than bridging or bracing maneuver on muscle thickness. We suggest that drawing-in maneuver will be more effective in a person with a weak abdominal muscle.

링기어의 경계조건이 가공오차를 가지는 유성기어열의 정특성에 미치는 영향 (Influence of Ring Gear Boundary Conditions on the Static Characteristics of Epicyclic Gear Trains with Manufacturing Errors)

  • 천길정
    • 대한기계학회논문집A
    • /
    • 제27권11호
    • /
    • pp.1949-1957
    • /
    • 2003
  • A hybrid finite element analysis was used to analyze the influence of ring gear rim thickness and spline number on the static properties of a planetary gear system with manufacturing errors. Both of these parameters affected the bearing force and critical stress. The effect of changes in the rim thickness on the load sharing between the gears depended on the type of manufacturing error. Ring flexibility improved the load sharing between planetary gears only in systems with planet tooth thickness or planet tangential errors; for other types of error, ring flexibility worsened the load sharing. To improve load sharing, rim thickness and spline number should be controlled within a specific range. The minimum rim thickness limit should be determined considering not only the critical stress but also the load sharing. The effect of the ring gear boundary condition was more apparent in a system with errors than in a normal system.

SH-EMAT를 이용한 알루미늄 박판의 두께감육 평가 (Evaluation of Thickness Reduction in an Aluminum Sheet using SH-EMAT)

  • 김용권;박익근
    • Journal of Welding and Joining
    • /
    • 제28권2호
    • /
    • pp.74-78
    • /
    • 2010
  • In this paper, a non-contact method of evaluating the thickness reduction in an aluminum sheet caused by corrosion and friction using SH-EMAT (shear horizontal, electromagnetic acoustic transducer) is described. Since this method is based on the measurement of the time-of-flight and amplitude change of guided waves caused from the thickness reduction, it provides information on the thinning defects. Information was obtained on the changes of the various wave features, such as their time-of-flight and amplitude, and their correlations with the thickness reduction were investigated. The interesting features in the dispersive behavior of selected guided modes were used for the detection of thinning defects. The measurements of these features using SH waves were performed on aluminum specimens with regions thinned by 7.2% to 29.5% of the total thickness. It is shown that the time-of-flight measurement provides an estimation of the thickness reduction and length of the thinning defects.

BIW 전착도장에서의 컴퓨터 시뮬레이션 적용사례 (Introduction of Computer Simulation for BIW Electrocoating Process)

  • 손대홍;정희진;안승호;김병수;김정연;최병삼
    • Corrosion Science and Technology
    • /
    • 제15권2호
    • /
    • pp.78-83
    • /
    • 2016
  • The e-coating to inhibit induced corrosion can deposit a coating not only on the exterior surface but also on the inside of whole metallic components of body-in-white (BIW). But it is difficult to deposit paint films on the inside area because metallic components are multi layered. It may cause shortness of e-coating thickness. The only way to properly verify e-coating thickness is by performing the use of tear-down prototypes. When paint films' thickness is inadequate, a structural modification on each metallic component is needed. Verification of the thickness improvement for a structural modification requires much manual effort and leads to increasing development time. Recently, the simulation technology has been developed to predict the e-coating thickness in e-coating field. By applying the simulation to BIW, improvement in paint thickness quality and shortening of development period are expected. The paper explains a validated solution that allows simulating the effect of design changes to the e-coating thickness and current density, thereby delivering results within a time frame of a few days.