• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 춘계학술발표회
• /
• pp.139-139
• /
• 1993

• Composites Research
• /
• 제12권1호
• /
• pp.28-36
• /
• 1999

본 연구에서는 얇은 탄소섬유/에폭시 복합적층판(두께 1mm)의 냉각열응력으로 인한 자유경계단 근처의 파손을 유한요소 수치해석과 초음파 C-scan, 광학 및 전자현미경 관찰을 통하여 검토하였다. 수치해석 결과, 복합적층판의 자유단 근처의 내부층에서 층냄 및 층간응력이 크게 나타났다. 액체질소에 의한 저온담금질 실험결과, 적층강도가 $[0_2/90_2]_s,\;[45_2/-45_0]_s,\;[0_2/60_2]_s$인 적층판의 층간근처의 내부층 쪽에서만 모재 및 계면부에서 진전하는 층내균열이 발생하였다. 이들 결과는 위의 수치해석 결과와 일치했다.

• Composites Research
• /
• 제25권4호
• /
• pp.105-109
• /
• 2012

최근 국내에서 미국과 상호항공안전협정 체결을 위한 소형 항공기가 연구 개발 중이다. 연구 대상 항공기는 경량화 하여 연료 절감을 위해 전기체 복합재료가 적용되었다. 그러나 복합재 구조는 외부의 충격 손상에 취약한 구조이다. 따라서 항공기 구조물은 충격 손상에 대한 압축 파손 강도를 고려하여 손상 허용 설계가 반드시 수행되어야 한다. 이는 복합재 구조 항공기 인증에 매우 중요한 요소이다. 본 연구에서는 항공기 복합재 구조에 적용된 두꺼운 적층판에 대한 손상 허용 연구를 수행하였다. 두꺼운 적층판의 세 가지 형태인 손상이 없는 시편, 구멍 손상 및 충격 손상이 적용된 시편의 압축 하중 하에서 손상 허용 기준이 평가되었다.

• Structural Engineering and Mechanics
• /
• 제7권5호
• /
• pp.473-484
• /
• 1999

In the present study, the thermal buckling analysis of thick anisotropic laminated composite plates is carried out using the finite strip method based on the higher-order shear deformation theory. This theory accounts for the parabolic distribution of the transverse shear strains through the thickness of the plate and for zero transverse shear stresses on the plate surfaces. Therefore, this theory yields improved results over the Mindlin plate theory and eliminates the need for shear correction factors in calculating the transverse shear stiffness. The critical temperatures of simply supported rectangular cross-ply and angle-ply composite laminates are calculated. The effects of several parameters, such as the aspect ratio, the length-to-thickness ratio, the number of plies, fibre orientation and stacking sequence, are investigated.

• Structural Engineering and Mechanics
• /
• 제3권1호
• /
• pp.49-60
• /
• 1995

In the present study, a finite strip method for the vibration and stability analyses of anisotropic laminated composite plates is developed according to the higher-order shear deformation theory. This theory accounts for the parabolic distribution of the transverse shear strains through the thickness of the plate and for zero transverse shear stresses on the plate surfaces. In comparison with the finite strip method based on the first-order shear deformation theory, the present method gives improved results for very thick plates while using approximately the same number of degrees of freedom. It also eliminates the need for shear correction factors in calculating the transverse shear stiffness. A number of numerical examples are presented to show the effect of aspect ratio, length-to-thickness ratio, number of plies, fibre orientation and stacking sequence on the natural frequencies and critical buckling loads of simply supported rectangular cross-ply and arbitrary angle-ply composite laminates.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.28-40
• /
• 1991

본 연구에서는 4변이 단순 지지된 두꺼운 역대칭 앵글 플라이 적층판의 굽힘, 좌굴 및 진동 거동을 규명하였으며, 인장과 굽힘, 비틀림 사이의 결합 특성을 고려하 였고, 전단 변형을 고려하였다.또 유사 변환 개념을 도입하여 복합 재료 적층판의 거동을 일반화 하였다.

• 비파괴검사학회지
• /
• 제19권5호
• /
• pp.347-355
• /
• 1999

두께 1mm의 얇은 복합적층판의 자유경계단부에서 열응력으로 인해 발생하는 미세손상을 진동거동과 관련된 비파괴평가의 가능성을 연구하였다. 유한요소 열응력해석을 통해 예상되는 손상발생영역을 초음파 C-스캔과 광학현미경을 이용하여 관찰하였다. 사인 스웝시험을 이용한 적증보 시험편의 횡진동 해석결과, 미세한 내부손상으로 인해 고유주파수가 확실히 감소하였으며 감쇠비도 상당히 증가하였다. 길이가 짧은 적층보 시험편과 2차 모드의 공진주파수를 이용하여 얇은 적층판에서 열응력으로 유기된 미세손상을 매우 민감하게 평가할 수 있음을 알았다.

• Steel and Composite Structures
• /
• 제38권6호
• /
• pp.717-737
• /
• 2021

A theoretical energy-based model to capture the mechanical response of thick woven composite laminates, which are used in such applications as maritime or aerospace, to high-velocity impact was developed. The dependences of the impact phenomenon on material and geometrical parameters were analysed making use of the Vaschy-Buckingham Theorem to provide a non-dimensional framework. The model was divided in three different stages splitting the physical interpretation of the perforation process: a first where different dissipative mechanisms such as compression or shear plugging were considered, a second where a transference of linear momentum was assumed and a third where only friction took place. The model was validated against experimental data along with a 3D finite element model. The numerical simulations were used to validate some of the new hypotheses assumed in the theoretical model to provide a more accurate explanation of the phenomena taking place during a high-velocity impact.

• Coupled systems mechanics
• /
• 제12권2호
• /
• pp.183-197
• /
• 2023

Scarce research has been published on crack propagation fracture of flywheels manufactured with carbon fiber-reinforced polymers. The present work deals with a calculation method to determine the conditions for which a crack propagates in the axial direction of the flywheel. The assumptions are: flywheels made with just a single thick ply or ply clustering laminates, oriented following the hoop direction; a single crack is analyzed in the plane defined by the hoop and axial directions; the crack starts close to one of the free edges; its axial length is initially large enough so that its tip is far away from that free edge, and the crack expands the entire circumferential perimeter and keeps its concentric position. The developed method provides information for a good design of flywheels. It is concluded that a fracture-based crack propagation criterion generally occurs at a lower speed than a stress-based criterion. Also, that the evolution of failure with thickness using the fracture criterion is exponential, demonstrating that thin flywheels are relatively not sensitive to crack propagation, whereas thick ones are very prone.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권4호
• /
• pp.226-234
• /
• 2004

A rapid Prototyping system that laser-cuts and laminates thick layers can fabricate 3D objects promptly with a variety of materials. Building such a system must consider the surface distortions due to both vertical-cut layers and triangular surfaces. We developed a tangential layer-cutting algorithm by rearranging tangential lines such that they reconstruct 3D surfaces more closely and also constitute smoother laser trajectories. An energy function that reflects the surface-closeness with the tangential lines was formulated and then the energy was minimized by a gradient descent method. Since this simple method tends to cause many local minima for complex 3D objects, we tried to solve this problem by adding a simulated annealing process to the proposed method. To view and manipulate 3D objects, we also implemented a 3D visual environment. Under this environment, experiments on various 3D objects showed that our algorithm effectively approximates 3D surfaces and makes laser-trajectory feasibly smooth.