• Steel and Composite Structures
• /
• 제25권2호
• /
• pp.141-155
• /
• 2017

This paper presents an investigation into the magneto-thermo-mechanical vibration and damping of a viscoelastic functionally graded-carbon nanotubes (FG-CNTs)-reinforced curved microbeam based on Timoshenko beam and strain gradient theories. The structure is surrounded by a viscoelastic medium which is simulated with spring, damper and shear elements. The effective temperature-dependent material properties of the CNTs-reinforced composite beam are obtained using the extended rule of mixture. The structure is assumed to be subjected to a longitudinal magnetic field. The governing equations of motion are derived using Hamilton's principle and solved by employing differential quadrature method (DQM). The effect of various parameter like volume percent and distribution type of CNTs, temperature change, magnetic field, boundary conditions, material length scale parameter, central angle, viscoelastic medium and structural damping on the vibration and damping behaviors of the nanocomposite curved microbeam is examined. The results show that with increasing volume percent of CNTs and considering magnetic field, material length scale parameter and viscoelastic medium, the frequency of the system increases and critically damped situation occurs at higher values of damper constant. In addition, the structure with FGX distribution type of CNTs has the highest stiffness. It is also observed that increasing temperature, structural damping and central angle of curved microbeam decreases the frequency of the system.

• Journal of Magnetics
• /
• 제14권4호
• /
• pp.161-164
• /
• 2009

Iron-doped $Sn_{1-x}Fe_xO_2$ (x = 0.0, 0.05, 0.1, 0.2, 0.33) thin films on Si(100) substrates and powders were prepared by a chemical solution process. The x-ray diffraction (XRD) patterns of the $Sn_{1-x}Fe_xO_2$ thin films and powders showed a polycrystalline rutile tetragonal structure. Thermo gravimetric (TG) - differential thermal analysis (DTA) showed the final weight loss above $430{^{\circ}C}$ for all powder samples. According to XRD Rietveld refinement of the powders, the lattice parameters and unit cell volume decreased with increasing Fe content. The magnetic properties were characterized using a vibrating sample magnetometer (VSM) and M$\ddot{o}$ssbauer spectroscopy. The thin film samples with x = 0.1 and 0.2 showed paramagnetic properties but thin films with x = 0.33 exhibited ferromagnetic properties at room temperature. Mossbauer studies revealed the $Fe^{3+}$ valence state in the samples. The ferromagnetism in the samples can be interpreted in terms of the direct ferromagnetic coupling of ferric ions via an electron trapped in a bridging oxygen deficiency, which can be explained using the F-center exchange model.

• Journal of Magnetics
• /
• 제18권4호
• /
• pp.391-394
• /
• 2013

In this study, nickel-zinc ferrite nanoparticles, with the chemical formula of $Ni_{0.3}Zn_{0.7-x}Cu_xFe_2O_4$ (where x = 0.1- 0.6 by step 0.1), were fabricated by the sol-gel method. The effect of copper substitution on the phase formation and crystal structure of the sample was investigated by X-ray diffraction (XRD), thermo-gravimetry (TG), differential thermal analysis (DTA), Fourier transform infrared spectrometry (FT-IR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The XRD result shows that due to the reduction of Zn content,the crystallite size of the sample increased. The results of the vibration sample magnetometer (VSM) exhibit an increase in saturation magnetization value (Ms) for samples with x ${\leq}$ 0.3 and a linear decrease for samples with x > 0.3. The variation of saturation magnetization and coercivity of the samples were then studied.

• Advances in nano research
• /
• 제16권5호
• /
• pp.489-500
• /
• 2024

This paper studies the free vibration analysis of the piezo-magneto-thermo-elastic FG nanobeam submerged in a fluid environment. The problem governed by the partial differential equations is determined by refined higher-order State Space Strain Gradient Theory (SSSGT). Hamilton's principle is applied to discretize the differential equation and transform it into a coupled Euler-Lagrange equation. Furthermore, the equations are solved analytically using Navier's solution technique to form stiffness, damping, and mass matrices. Also, the effects of nonlocal ceramic and metal parts over various parameters such as temperature, Magnetic potential and electric voltage on the free vibration are interpreted graphically. A comparison with existing published findings is performed to showcase the precision of the results.

• Steel and Composite Structures
• /
• 제33권1호
• /
• pp.93-109
• /
• 2019

In the present study, vibration analysis of double bonded micro sandwich cylindrical shells with saturated porous core and carbon/boron nitride nanotubes (CNT/BNNT) reinforced composite face sheets under multi-physical loadings based on Cooper-Naghdi theory is investigated. The material properties of the micro structure are assumed to be temperature dependent, and each of the micro-tubes is placed on the Pasternak elastic foundations, and mechanical, moisture, thermal, electrical, and magnetic forces are effective on the structural behavior. The distributions of porous materials in three distributions such as non-linear non-symmetric, nonlinear-symmetric, and uniform are considered. The relationship including electro-magneto-hydro-thermo-mechanical loadings based on modified couple stress theory is obtained and moreover the governing equations of motion using the energy method and the Hamilton's principle are derived. Also, Navier's type solution is also used to solve the governing equations of motion. The effects of various parameters such as material length scale parameter, temperature change, various distributions of nanotube, volume fraction of nanotubes, porosity and Skempton coefficients, and geometric parameters on the natural frequency of double bonded micro sandwich cylindrical shells are investigated. Increasing the porosity and the Skempton coefficients of the core in micro sandwich cylindrical shell lead to increase the natural frequency of the structure. Cylindrical shells and porous materials in the industry of filters and separators, heat exchangers and coolers are widely used and are generally accepted today.

• 암석학회지
• /
• 제24권3호
• /
• pp.209-231
• /
• 2015

화강암 석산에서는 '결'이라고 지칭되는 분리되기 용이한 면을 따라 채석이 이루어진다. 이러한 결의 방향성과 발달 특징은 채석의 효율성과 관련되므로 석산에서 채굴방향을 결정함에 있어 고려해야할 가장 중요한 요인이다. 이번 연구에서는 한반도 남부 거창지역에 분포하는 화강암 석산(JS기업, SD개발, AR석재, GD산업, BW무역, MD기업사)들을 대상으로 대자율이방성 방법을 적용하여 석재의 자기미세구조를 해석하였으며, 이로부터 석재 결과의 연관성 및 파악방법에 대해 논의하였다. 평균대자율 분석, 고온대자율 실험 그리고 자기이력곡선 분석 결과, 화강암 석재의 대자율이방성을 지배하는 주자성광물은 티탄함량이 적은 다자구 및 위단자구의 자철석으로 해석된다. 대자율이방성 측정 결과, 6개 석산 모두에서 체계적인 방향성의 자기엽리구조가 발달하며, 자기엽리구조는 대부분 거의 수직에 가까운 고각의 경사를 가진다. 자기엽리구조는 대부분 석산에서 석재의 2번 결과 매우 유사한 방향성을 보인다. 예외적으로 다른 석산에 비해 $P_J$ 값이 높아 미세구조의 발달이 현저한 BW무역에서의 자기엽리구조는 1번 결과 거의 평행하다. 이상의 결과들은 화강암 석재의 결은 광물결정들의 모양 및 배열상태, 즉 암석미세구조와 밀접하게 관련됨을 지시하고 있어, 대자율이방성을 이용한 자기미세구조 분석은 석재 결의 방향성을 측정하는 정량적이고 효과적인 하나의 방법이 될 수 있음을 알려준다.

• 한국자기학회지
• /
• 제12권5호
• /
• pp.184-188
• /
• 2002

수직자기이방성을 가지는 Cu/Ni/Cu(002)/Si(100) 자성박막을 전자빔 증발법을 이용하여 초고진공에서 증착 하였다. 증착 시 RHEED로 측정 한 결과 실리콘 기판 위에 자성박막이 적층성장되었음을 확인하였다. 이러한 Cu/Ni/Cu(001)/Si(100) 자성박막에 1 MeV C 이온을 이온선량 2$\times$$10^{16}$ ions/$\textrm{cm}^2$로 조사한 후 MOKE로 자기이력곡선을 측정한 결과 이온 조사에 의해 자화용이축이 수직에서 수평방향으로 변화되었음을 확인하였다 포항 방사광가속기를 이용하여 X-선 반사도와 Grazing Incident X-ray diffraction(GE) 분석을 수행한 결과 첫 번째 Cu층과 Ni층 사이의 계면은 이온 조사 후 거칠기는 증가하였으나, Cu와 Ni의 전자밀도의 대비는 더욱 명확해졌다. 그리고, 증착 후 Cu와 Ni원자의 격자 상수 차이에 의해 Ni층이 가지고 있었던 strain은 이온 조사 후 완화되었음을 알 수 있었다. 끝으로, 이온조사 시 자성특성 변화와 직접적인 관계가 있는 strain 완화, 계면 혼합층(혹은 새로운 상)등이 생성되는 기구를 탄성충돌 및 비탄성충돌에 의한 열화학적 구동력으로 규명하였다.

• Steel and Composite Structures
• /
• 제28권3호
• /
• pp.331-347
• /
• 2018

In this paper history of stresses, strains, radial and circumferential displacements of a functionally graded thick-walled hollow cylinder due to creep phenomenon is investigated. The cylinder is subjected to an arbitrary non-axisymmetric two dimensional thermo-mechanical loading and uniform magnetic field along axial direction. Using equilibrium, strain-displacements and stress-strain relations, the governing differential equations of the problem containing creep strains are derived in terms of radial and circumferential displacements. Since the displacements are varying with time due to creep phenomenon, an analytical solution is not available for these equations. Thus, a semi-analytical procedure based on separation of variables and Fourier series together with a numerical procedure is employed. The numerical results indicate that the non-axisymmetric loading and the material grading index have significant effect on stress redistributions. Moreover, by proper selection of material for any combination of non-axisymmetric loading, one can arrive suitable response for the cylinder to achieve optimal design. With some simplifications, the results are validated with the existing literature.

• 한국재료학회지
• /
• 제22권6호
• /
• pp.275-279
• /
• 2012

(3-mercaptopropyl)trimethoxysilane (MPTMS) was used as a silylation agent, and modified silica nanoparticles were prepared by solution polymerization. 2.0 g of silica nanoparticles, 150 ml of toluene, and 20 ml of MPTMS were put into a 300 ml flask, and these mixtures were dispersed with ultrasonic vibration for 60 min. 0.2 g of hydroquinone as an inhibitor and 1 to 2 drops of 2,6-dimethylpyridine as a catalyst were added into the mixture. The mixture was then stirred with a magnetic stirrer for 8 hrs. at room temperature. After the reaction, the mixture was centrifuged for 1 hr. at 6000rpm. After precipitation, 150 ml of ethanol was added, and ultrasonic vibration was applied for 30 min. After the ultrasonic vibration, centrifugation was carried out again for 1 hr. at 6000rpm. Organo-modification of silica nanoparticles with a ${\gamma}$-methacryloxypropyl functional group was successfully achieved by solution polymerization in the ethanol solution. The characteristics of the ${\gamma}$-mercaptopropyl modified silica nanoparticles (MPSN) were examined using X-ray photoelectron spectroscopy (XPS, THERMO VG SCIENTIFIC, MultiLab 2000), a laser scattering system (LSS, TOPCON Co., GLS-1000), Fourier transform infrared spectroscopy (FTIR, JASCO INTERNATIONL CO., FT/IR-4200), scanning electron microscopy (SEM, HITACHI, S-2400), an elemental analysis (EA, Elementar, Vario macro/micro) and a thermogravimetric analysis (TGA, Perkin Elmer, TGA 7, Pyris 1). From the analysis results, the content of the methacryloxypropyl group was 0.98 mmol/g and the conversion rate of acrylamide monomer was 93%. SEM analysis results showed that the organo-modification of ultra-fine particles effectively prevented their agglomeration and improved their dispensability.

• Journal of Astronomy and Space Sciences
• /
• 제25권4호
• /
• pp.405-414
• /
• 2008

이 연구에서는 고위도 하부 열권 역학을 좌우하는 물리적 과정을 이해하기 위하여, 상이한 행성간 자기장(Interplanetary Magnetic Field, IMF)에 따른 남반구 고위도 하부 열권에서의 소용돌이도(vorticity)와 발산(divergence)을 분석하였다. 이 연구를 위하여 미국립대기연구소(National Center for Atmospheric Research, NCAR)의 열권-이온권 전기역학적 대순환 모델(Thermo sphere-Ionosphere Electrodynamic General Circulation Model, TIEGCM)을 이용하였다. 소용돌이도와 발산 분석은 전체 수평 바람장을 최종적으로 결정하는 운동량원(momentum source)을 밝히는데 도움을 주는 근원적인 흐름을 파악할 수 있게 해주며, 운동량원들의 상대적인 강도를 분석해내는데 좋은 도구가 된다. 고위도 하부 열권의 평균 바람장은 태양 복사와 쥴가열에 의해 유발되는 발산운동 보다는 이온대류에 의해 유발되는 회전운동에 의해 주로 지배된다는 것이 확인되었다. $IMF{\neq}0$와 IMF=0인 경우의 고위도 열권 하부에서의 소용돌이도 차이(difference vorticity)가 모든 IMF 조건에서 발산장 차이(difference divergence)에 비해 훨씬 더 크게 나타났다. 이는 IMF가 발산적인 흐름보다 회전적인 흐름에 더 강하게 영향을 끼치며, 나아가 IMF가 발산운동을 유발하는 에너지 유입보다는 회전운동을 유발하는 운동량 유입에 더 강하게 영향을 끼침을 의미한다. IMF의 방향에 따라 고위도 하부 열권에서의 소용돌이도 차이의 양상이 매우 달랐다 $B_y$가 음일 때는 지자기 위도 $-70^{\circ}$ 이상의 고위도에서 극을 중심으로 양의 소용돌이도 차이가 나타나고 $B_y$가 양일 때는 음의 소용돌이도 차이가 나타났다. $B_z$가 음인 경우 소용돌이도 차이가 저녁 영역에는 양이고 새벽 영역에는 음이며, $B_z$가 양인 경우에는 반대의 분포를 보였다. $B_z$가 음일 때가 양일 때보다 소용돌이도 차이가 더 큰 것으로 확인되었는데, 이는 IMF $B_z$가 남쪽으로 향할 때가 북쪽으로 향할 때보다 고위도 이온권의 이온대류를 더 강화시켜 열권 중성대기의 회전적인 흐름을 더 강하게 유발시킴을 의미한다.