• 공업화학
• /
• 제18권2호
• /
• pp.136-141
• /
• 2007

본 연구에서는 열플라즈마를 이용하여 클로로메탄 즉 사염화탄소($CCl_4$), 삼염화탄소($CCl_3H$), 이염화탄소($CCl_2H_2$)를 분해하는 실험을 수행하였으며 열플라즈마분해공정의 특성에 대한 연구를 진행하였다. Factsage program을 이용하여 열역학적 평형조성을 알아보았으며, 또한 Gas chromatography를 이용하여 농도, 캐리어 가스의 유량 및 quenching 속도등 세가지 변수의 변화에 따른 분해율을 살펴보았다. 실험 결과 92%이상의 높은 분해율을 얻었다. FT-IR을 이용하여 최종 생성물을 확인한 결과 중성 분위기에서는 주로 카본, 염소, 염화수소가 생성되었고 산화 분위기에서는 카본의 생성이 억제되었으며 주로 이산화탄소, 염화수소, 염소가 생성되었다. FT-IR생성물에 대한 분석과 Factsage program에 의한 온도 분포 별 생성된 라디칼 및 기타 입자의 종류와 결부하여 이에 따른 분해 메커니즘에 대해 알아보았다. 분해 경로는 주로 라디칼에 의한 산화반응과 전자 부착에 의한 분해 반응으로 이루어짐을 확인하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.329-332
• /
• 2012

The droplet behavior of 83.9 wt.% HAN water solution was investigated experimentally with various ambient temperature and nitrogen environment. At the initial stage of evaporation under thermal decomposition temperature of HAN, gradual decreasing of droplet diameter was observed. After that, the droplet started to expand due to the internal pressure build up by water nucleation inside the droplet. The micro explosion was observed at higher temperature than the decomposition temperature of HAN and the remaining droplet showed similar behavior of single composition droplet. The decreasing rate was augmented as the ambient temperature increasing.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.311-314
• /
• 2009

고체추진기관의 연소 환경에서 복잡한 형상을 갖는 내열 복합재료의 온도 및 밀도분포를 예측할 수 있는 방법을 개발하였다. 복합재료의 내부 열반응은 Arrhenius 모델을 이용하였으며, 표면 삭마반응은 Zvyagin 이론을 사용하였다. 표면 삭마에 의한 경계조건 및 격자 이동은 Rezoning 기법을 사용하였으며 열분해에 의한 흡열반응 효과는 열분해 가스의 조성비에 기준한 유효 비열 값을 이용하여 계산되었다. 형상이 복잡한 부품으로 이루어진 2차원 축대칭 노즐 조립체에 적용된 방법은 향후 3차원 FEM 열구조 해석에 활용을 목표로 발전될 것이다.

• Advances in nano research
• /
• 제6권1호
• /
• pp.1-19
• /
• 2018

Iron oxide nanoparticles excite researcher interest in biomedical applications due to their low cost, biocompatibility and superparamagnetism properties. Magnetic iron oxide especially magnetite ($Fe_3O_4$) possessed a superparamagnetic behaviour at certain nanosize which beneficial for drug and gene delivery, diagnosis and imaging. The properties of nanoparticles mainly depend on their synthesis procedure. There has been a massive effort in developing the best synthetic strategies to yield appropriate physico-chemical properties namely co-precipitation, thermal decomposition, microemulsions, hydrothermal and sol-gel. In this review, it is discovered that magnetite nanoparticles are best yielded by co-precipitation method owing to their simplicity and large production. However, its magnetic saturation is within range of 70-80 emu/g which is lower than thermal decomposition and hydrothermal methods (80-90 emu/g) at 100 nm. Dimension wise, less than 100 nm is produced by co-precipitation method at $70^{\circ}C-80^{\circ}C$ while thermal decomposition and hydrothermal methods could produce less than 50 nm but at very high temperature ranging between $200^{\circ}C$ and $300^{\circ}C$. Thus, co-precipitation is the optimum method for pre-compliance magnetite nanoparticles preparation (e.g., 100 nm is fit enough for biomedical applications) since thermal decomposition and hydrothermal required more sophisticated facilities.

• 한국가스학회지
• /
• 제4권1호
• /
• pp.16-25
• /
• 2000

스틸렌 공중합체의 열적특성과 독성인자를 평가하기 위하여 활성화 에너지, 물리적 특성 및 마취성 기체와 같은 독성물질의 발생가능성에 대하여 조사하였다 고온 분해시에 Kissinger법과 DSC법에 의해 계산된 활성화 에너지는 25${\~}$50 Kcal/mol이었다. 이것은 화재발생가능성에 대하여 좋은 정보가 될 것이다 FED계산으로부터 PS, SAN 및 ABS에 대한 $LC_{50}$의 값은 8,580, 265 및 308 $mg/m^3$이 되었다. FT-IR에 의해 분석한 열분해 반응의 메카니즘은 측쇄반응이 아니고 주쇄반응이었다.

• Journal of the Korean Wood Science and Technology
• /
• 제30권3호
• /
• pp.34-41
• /
• 2002

This study investigated the thermogravimetric analysis of two types of cured tannin-based adhesives from wattle and pine, with three hardeners of paraformaldehyde, hexamethylenetetramine and TN (tris(hydroxyl)nitromethan), at a temperature of 170℃ and a heating rate of 5, 10, 20 and 40℃/min for 10 minutes. The 5 minutes cured wattle tannin-based adhesive with each hardener at 170℃ was also tested to compare the degree of curing. It was found that thermogravimetric analysis could be used to measure the degree of curing of a thermosetting adhesive. The TG-DTG curves of all the adhesive systems were similar and showed three steps in a similar way to a phenolic resin. This means that each adhesive system is well cross-linked. However, a high thermal decomposition rate was shown at 150 to 400℃ in the case of the pine tannin sample with TN (tris(hydroxyl)nitromethan). The Flynn & Wall expression was used to evaluate the activation energy for thermal decomposition. As the level of conversion (𝛼) increased, the activation energy of each system increased. The activation energy of the wattle tannin-based adhesive with paraformaldehyde was higher than the others.

• 자원리싸이클링
• /
• 제9권6호
• /
• pp.15-22
• /
• 2000

자원을 절약하고 환경을 보호하기 위해 철강업체에서는 폐플라스틱을 재활용하기 위한 기술개발에 힘쓰고 있다. 본 연구에서는 플라스틱의 고로 취입시 연소대내 거동을 이해하기 위해, 열분해 실험과 연소실험을 실시하였으며 플라스틱 취입시 연소온도에 대해 이론적으로 검토하였다. 대기조건에서 열중량분석장치를 이용하여 3종류의 플라스틱을 대상으로한 열분해 실험을 통해서는, 열분해 개시온도와 최대 열분해 온도는 승온속도가 증가함에 따라 지수적으로 증가하는 것으로 나타났다. 코크스 충전층 연소장치를 이용하여 플라스틱 취입에 따른 연소거동을 모사하였다. 플라스틱의 연소효율은 미분탄에 비하여 낮았으며, 산소부화는 플라스틱의 연소효율을 효과적으로 증대시킬 수 있는 방법으로 밝혀졌다. 또한 플라스틱 취입시 연소온도를 계산하였으며, 이를 기준으로 고로에 최대 취입가능한 플라스틱의 량을 예측하였다

• 한국분무공학회지
• /
• 제25권3호
• /
• pp.132-138
• /
• 2020

N₂O is hazardous atmosphere pollution matter which can damage the ozone layer and cause green house effect. There are many other nitrogen oxide emission control but N₂O has no its particular method. Preventing further environmental pollution and global warming, it is essential to control N₂O emission from industrial machines. In this study, the thermal decomposition experiment of N₂O gas mixture is conducted by using cylindrical reactor to figure out N₂O reduction and NO formation. And CHEMKIN calculation is conducted to figure out reaction rate and mechanism. Residence time of the N₂O gas in the reactor is set as experimental variable to imitate real SNCR system. As a result, most of the nitrogen components are converted into N2. Reaction rate of the N₂O gas decreases with N₂O emitted concentration. At 800℃ and 900℃, N₂O reduction variance and NO concentration are increased with residence time and temperature. However, at 1000℃, N₂O reduction variance and NO concentration are deceased in 40s due to forward reaction rate diminished and reverse reaction rate appeared.

• 한국재료학회지
• /
• 제11권11호
• /
• pp.953-959
• /
• 2001

Homogeneous spherical W-Co salt powders were made by spray drying of aqueous solution of ammonium $metatungstate(NH_4)_6(H_2W_{12}O_{40}){\cdot}4H_2O,\; AMT)$ and cobalt nitrate $hexahydrate(Co(NO_3)_2{\cdot}6H_2O)$. The thermal decomposition process of spray dried W-Co salt powders was studied by TG, XRD, SEM, TEM and FT-IR. Spray dried W-Co salt powders were calcined for 1 hour in the temperature from$ 350^{\circ}C$ to $800^{\circ}C$ in atmosphere of air. At the temperatures over $600^{\circ}C$, spherical $CoWO_4/WO_3$ composite oxide powders were obtained. The primary particle size of W/Co composite oxide powders increased with increasing thermal decomposition temperature due to the particle growth. The observed crystallite size by TEM was in the range of 60nm and that of $CoWO_4$ calculated by Scherrer's formula at $800^{\circ}C$ was smaller than 55nm. The crystallite site was identified by XRD and TEM.

• 한국태양에너지학회 논문집
• /
• 제37권5호
• /
• pp.27-37
• /
• 2017

In this study, an artificial solar simulator composed of a 2.5 kW Xe-Arc lamp and mirror reflector was used to carry out the solar thermal two step thermochemical water decomposition cycle which can produce high efficiency continuous hydrogen production. Through various operating conditions, the change of hydrogen production due to the possibility of a dual-zone reactor and heat recovery were experimentally analyzed. Based on the reaction temperature of Thermal-Reduction step and Water-Decomposition step at $1,400^{\circ}C$ and $1,000^{\circ}C$ respectively, the hydrogen production decreased by 23.2% under the power off condition, and as a result of experiments using heat recovery technology, the hydrogen production increased by 33.8%. Therefore, when a thermochemical two-step water decomposition cycle is conducted using a dual-zone reactor with heat recovery, it is expected that the cycle can be operated twice over a certain period of time and the hydrogen production amount is increased by at least 53.5% compared to a single reactor.