• 한국수소및신에너지학회논문집
• /
• 제24권4호
• /
• pp.275-281
• /
• 2013

This study was conducted to increase the amount of bio-hydrogen production from microalgae(Chlorella vulgaris) in batch reactors by thermal pre-treatment. The optimization of thermal pre-treatment was conducted using statistic experimental design of response surface methodology. Two experimental parameters of temperature and reaction time were considered. The optimization condition was founded at the coded variables of <0.52, -0.07> corresponding to the experimental of heating temperature of $95.6^{\circ}C$ and reaction time of 57.9 min, respectively. Under the optimal condition, the maximum hydrogen production was predicted to 25.3mL $H_2/g$ dry cell weight (dcw), which was 9.1 times higher value of control(2.8mL $H_2/g$ dcw).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.776-778
• /
• 1999

In this paper, identifier for thermal storage system using multi-layer feedforward neural network (MFNN) is designed. It is very difficult to control thermal storage system, since thermal storage system is nonlinear and its time constant is very large. Thus, in the MFNN, delta-bar-delta algorithm for high running speed and 2-bit status input are used. Also hardware using microprocessor for identifier is developed. The experimental results indicate that the proposed method can predict temperature more accurately.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1188-1194
• /
• 2008

To cope with the demagnetization risk of permanent magnets used in Interior Permanent Magnet Synchronous Motors(IPMSM), an accurate iron analysis and thermal analysis are very important. In this research, to calculate thermal increment of IPMSM for high-speed traction motor, we will extract losses of IPMSM considering the condition of field weakening control. Then we will input the calculated losses such as iron loss and copper loss as the thermal sources. Based on magnetic filed and thermal analysis, we will support the design of IPMSM for high-speed train.

• 설비공학논문집
• /
• 제18권5호
• /
• pp.402-409
• /
• 2006

For the design of a liquid direct contact cooling system, thermal and hydraulic analysis has been carried out. Well-known Zukauskas correlations are used to estimate the Nusselt number between the liquid refrigerant columns and the inlet airflow. The inlet air velocity is set at a typical value used in an actual showcase. For a constant column number, the best nozzle arrangement is determined for the maximum heat transfer. Heat transfer increases as the transverse pitch of the refrigerant column decreases. Among all the cases dealt with in the present study, the staggered arrangement with 140-columns of $14{\times}10$ shows the best thermal peformance and the expected temperature drop is $27.8^{\circ}C$. The effect of downstream refrigerant columns on the overall thermal performance is investigated as well.

• 시스템엔지니어링학술지
• /
• 제12권1호
• /
• pp.113-120
• /
• 2016

Steel in a continuous reheat furnace is heated to higher temperature to be treated in the rolling steel process. Due to this reason the continuous reheat furnace system requires an optimal control system to adjust the temperature inside the furnace. Level 2 control systems for continuous reheat furnaces generate automatic heating set points for the level 1 system of the furnace based on the mathematical thermal model which can give a good estimation of steel heating inside the furnace and is used to adjust heating requirements to optimize furnace combustion. For the current study the analytic methodology based on the design procedure from the systems engineering to develop new level 2 control system of a continuous reheat furnace was proposed. The system analysis and the requirements of the level 2 control system were derived using the unified modeling language (UML) 2.0, and the design of database and the graphic user interface (GUI) for the level 2 control system were conducted.

• 한국항공우주학회지
• /
• 제43권10호
• /
• pp.875-887
• /
• 2015

최적 배치 설계는 다양한 산업분야에서 활용되고 있다. 우주분야인 위성 플랫폼에서도 제한된 공간 내에서 기계적, 열적, 전기적 인터페이스를 고려한 구성품 배치가 가능하도록 최적 배치 설계가 요구된다. 최적 배치 설계를 통해 합리적인 수준에서 최소화된 위성 플랫폼의 관성모멘트는 위성의 효율적인 자세제어 및 신속한 기동을 가능하게 하며, 위성의 임무성능을 향상시키는데 도움을 준다. 이를 위해 본 논문에서는 육면체 구조의 위성 플랫폼을 기반으로 내부 구성품들이 서로 간섭이 없는 상태에서 위성의 관성모멘트와 구성품 간 발열로 인한 영향을 최소로 하는 3D 최적 배치 설계를 제안한다. 본 연구에서는 3D 최적 배치 설계를 위해 새로운 유전 알고리즘을 제안한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.533-536
• /
• 2002

A heating flow discharged from a 4-way ceiling type indoor unit has been investigated using a PIV(particle image velocimetry) system For the PIV measurements, an experimental model of 1/10 scale with a transparent room was devised by satisfying the Archimedes number, which is generally used in case that the forced convection has the similar magnitude as the natural convection. To optimize the heating flow, several vane angles and vane control algorithms of cross and right angle controls were considered. Regarding the vane angle, the experimental results show that it should be less than $30^{\circ}$ to avoid re-suction flows which decrease the performance of the air-conditioner. At the vane angle of $30^{\circ}$, applying open/close control gives nae to more uniform distribution of the heating flow than without control. Especially, the cross-control seems to be satisfactory for the thermal comfort.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2001년도 춘계학술발표대회 논문집
• /
• pp.117-120
• /
• 2001

This study is a preliminary research to develop design principles for environmentally friendly housing. The purposes of study are to investigate the literatures related passive design for summer and theory of ventilation, to analyze the indoor airflow patterns in traditional Korean house during summer, and to propose the design factors for effective passive cooling system. The analysis for airflow patterns was focused on the ‘An bang’and the ‘Dae Chung’in the ‘An Chae’of a traditional house located in Seoul. Field measurements of air temperature and air velocity were carried out at 30 different measuring points with 8 different window-opening conditions. The measurements were taken on the hottest summer days in August 2000. It is concluded that from an environmentally friendly standpoint design factors to control indoor thermal environment by a passive cooling system during the summer are as follows; ceiling structure has thermal performance like a time-lag effect, optimum height and length of eaves which can prevent sunlight and divert airflow toward the sitting level, building arrangement acceptable the prevailing wind, strategic window arrangement which makes cross ventilation possible (especially north-south) at the sitting level, window opening condition which is possible to intersect two cross-ventilation stream at the main living areas, northward windows remaining in shade to create the air pressure difference, and planning building shape like a bracket that has optimum width and depth.

• 한국추진공학회지
• /
• 제2권3호
• /
• pp.80-89
• /
• 1998

다목적 실용위성의 궤도전이 및 위성체 자세제어를 위한 추진시스템의 설계요소에는 구조적 안전성, 우주환경에서의 열 제어를 위한 회로 및 구성하드웨어 설계, 연료계통 맥압강하를 위한 장치설계 및 추력기 배기가스 영향을 고려한 형상설계 등이 있으며, 설계검증을 위해 부분해석이 수행된다. 또한 발사환경과 우주 궤도환경에서의 추진시스템 성능평가를 위한 열 제어계 기능시험, 압력인증시험, 청정도시험 및 내부/외부 누설시험이 수행된다. 본 논문에서는 추진시스템 설계 및 조립공정에 대해 기술하였고, 시험분석을 통해 시스템의 설계 및 조립공정상의 신뢰성을 검증 분석하였다.

• 한국지능시스템학회논문지
• /
• 제8권6호
• /
• pp.37-47
• /
• 1998

본 논문은 진화 연산 알고리즘과 퍼지 로직을 이용하여 고속 열처리 공정기의 웨이퍼 온도를 제어하는 제어기 설계 방법을 제안한다. 전체 제어기는 기준 온도의 정상 상태의 추종을 위한 앞먹임 정적 제어기, 과도 상태의 추종을 위한 앞먹임 동적 제어기, 그리고 온라인 상에서 모델링 오차나 외란을 극복하기 위한 되먹임 오차 제어기로 구성된다. 앞먹임 제어기들은 퍼지 로직을 이용하여 모든 동작점에서 제어 입력을 구해주는 전역적 비선형 제어기로 구성된다. 각 제어기들의 제어 파라미터는 진화 연산 알고리즘을 이용하여 추정되므로 수학적 모델식을 모르는 경우에도 제어기를 설계할 수 있는 장점이 있다. 끝으로 모의 실험을 통하여 제어기의 성능을 검증한다.