• Geomechanics and Engineering
• /
• 제18권2호
• /
• pp.205-213
• /
• 2019

A calculation model of reservoir pressure field distribution around multiple production wells in a heavy oil reservoir is established, which can overcome the unreasonable uniform-pressure value calculated by the traditional mathematical model in the multiwell mining areas. A calculating program is developed based on the deduced equations by using Visual Basic computer language. Based on the proposed mathematical model, the effects of drainage rate and formation permeability on the distribution of reservoir pressure are studied. Results show that the reservoir pressure drops most at the wellbore. The farther the distance away from the borehole, the sparser the isobaric lines distribute. Increasing drainage rate results in decreasing reservoir pressure and bottom-hole pressure, especially the latter. The permeability has a significant effect on bottom hole pressure. The study provides a reference basis for studying the dynamic pressure field distribution before thermal recovery technology in heavy oilfield and optimizing construction parameters.

• 한국의류산업학회지
• /
• 제15권6호
• /
• pp.985-992
• /
• 2013

Polytrimethylene terephthalate(PTT) offers several advantageous properties such as good tensile strength, uniformity, stiffness, toughness, UV stability, resilience, stain resistance, outstanding elastic recovery, and dyeability. The effects of annealing temperature on physical properties and the structure of PTT filaments and yarn were investigated by measuring wide-angle X-ray diffraction (WAXD), density, optical birefringence, dynamic visco elasticity, and tensile testing. The intensity of maximum tan ${\delta}$ decreased and the temperature of maximum tan ${\delta}$ shifted to a higher temperature as the annealing temperature of filaments increased; however, it shifted to a lower temperature when the annealing temperature exceeded $130^{\circ}C$. In addition, crystallinity, density and D-spacing of (010) crystal face increased as the annealing temperature increased. Optical birefringence and specific stress were almost constant up to $100^{\circ}C$ and then decreased above $130^{\circ}C$. The shrinkage of PTT filament is 0 in boiling water when annealed above $130^{\circ}C$; consequently, the use of annealed fiber above $130^{\circ}C$ can remove thermal instability when dyeing PTT fiber. In the case of yarns, the thermal stability and physical properties of yarns showed the best effect when the ply number is less than 5, twist number is less than 400tpm, and the annealing time is 20minutes.

• 한국환경과학회지
• /
• 제25권9호
• /
• pp.1269-1281
• /
• 2016

This study evaporative cooling system a heat wave climate change and reduction of the inside and outside thermal environment change research. Measurement items included micro meteorological phenomena and measured comfort indices. A micro meteorograph of temperature, relative humidity, surface temperature, and the comfort indices of WBGT, UTCI, and PMV were measured. The difference in inside and outside temperatures were compared for different land types, with the largest difference found in Type A ($4.81^{\circ}C$), followed by Type B ($4.40^{\circ}C$) and Type C ($3.12^{\circ}C$). Relative humidity was about 10.43% higher inside due to water injection by the evaporative cooling system. Surface temperature was inside about $6.60^{\circ}C$ higher than the outside all types. WBGT were Type A ($3.50^{\circ}C$) > Type B ($2.71^{\circ}C$) > Type C ($1.88^{\circ}C$). UTCI was low heat stress inside than outside all types. PMV was analysed Type C for inside predicted percentage of dissatisfied 75%, other types was percentage of dissatisfied 100% by inside and outside. Correlation analysis between land cover type and temperature, surface temperature, pmv, utci. T-test analysed inside and outside temperature difference was significant in all types of land.

• The Korean Journal of Physiology and Pharmacology
• /
• 제11권6호
• /
• pp.233-237
• /
• 2007

Tropical natives (TROP) are capable of tolerating tropical heat because of their long-term adaptation to tropical environments. When exposed to heat stress, these natives tend to respond with lower sweat output, which is generally thought to be the result of heat acclimatization. The main objective of this study was to clarify central mechanisms inherent to suppressed thermal sweating in tropical natives (Malaysians) by comparing their sweating responses to those of temperate native (TEMP) (Koreans). This experiment was conducted in a thermoneutral climatic chamber ($24{\pm}0.5^{\circ}C,\;40{\pm}3%$ relative humidity). Heat loads were applied to each subject by the immersion of their lower legs in a hot water bath ($43^{\circ}C$ for 30 min). Sweat onset-time and sweat volume were compared between TROP and TEMP. The sweat onset-times on four selected points on the body ranged from 10.25 to 13.47 min in TEMP subjects, and from 16.24 to 17.83 min in TROP subjects (p<0.001). The local sweat volumes at the same sites ranged from 4.30 to $9.74 mg/cm^2$ in TEMP subjects, and from between 1.80 to $4.40mg/cm^2$ in TROP subjects (p<0.001). These results demonstrated a significant difference between TROP and TEMP subjects with regard to the manner in which they regulate their body temperatures when exposed to heat loads, and verified that long-term thermal adaptation blunts sweating sensitivities.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.230.2-230.2
• /
• 2016

A new approach for antimicrobial is based on the overproduction of reactive nitrogen species (RNS), especially; nitric oxide (NO) and peroxinitrite ($ONOO^-$-) are important factors to deactivate the bacteria. Recently, non-thermal atmospheric pressure plasma jet (APPJ) has been frequently used in the field of microbial sterilization through the generation of different kinds of RNS/ROS species. However, in previous study we showed APPJ has combine effects ROS/RNS on bacterial sterilization. It is not still clear whether this bacterial killing effect has been done through ROS or RNS. We need to further investigate separate effect of ROS and RNS on bacterial sterilization. Hence, in this work, we have enhanced NO production, especially; by applying a 1% of HNO3 vapour to the N2 based APPJ. In comparison with nitrogen plasma with inclusion of water vapour plasma, it has been shown that nitrogen plasma with inclusion of 1% of HNO3 vapour has higher efficiency in killing the E. coli and different type of cancer cell through the high production of NO. We also investigate the enhancement of NO species both in atmosphere by emission spectrum and inside the solution by ultraviolet absorption spectroscopy. Moreover, qPCR analysis of oxidative stress mRNA shows higher gene expression. It is noted that 1% of HNO3 vapour plasma generates high amount of NO for killing bacteria and cancer cell killing.

• Safety and Health at Work
• /
• 제8권4호
• /
• pp.327-328
• /
• 2017

Despite provision of drinking water as the most common method of occupational heat stress prevention, there remains confusion in hydration messaging to workers. During work site interactions in a hot and humid climate, workers commonly report being informed to consume tepid fluids to accelerate rehydration. When questioned on the evidence supporting such advice, workers typically cite that fluid absorption is delayed by ingestion of chilled beverages. Presumably, delayed absorption would be a product of fluid delivery from the gut to the intestines, otherwise known as gastric emptying. Regulation of gastric emptying is multifactorial, with gastric volume and beverage energy density the primary factors. If gastric emptying is temperature dependent, the impact of cooling is modest in both magnitude and duration (${\leq}5$ minutes) due to the warming of fluids upon ingestion, particularly where workers have elevated core temperature. Given that chilled beverages are most preferred by workers, and result in greater consumption than warm fluids during and following physical activity, the resultant increased consumption of chilled fluids would promote gastric emptying through superior gastric volume. Hence, advising workers to avoid cool/cold fluids during rehydration appears to be a misinterpretation of the research. More appropriate messaging to workers would include the thermal benefits of cool/cold fluid consumption in hot and humid conditions, thereby promoting autonomy to trial chilled beverages and determine personal preference. In doing so, temperature-based palatability would be maximized and increase the likelihood of workers maintaining or restoring hydration status during and after their work shift.

• 환경생물
• /
• 제33권4호
• /
• pp.450-458
• /
• 2015

The heat shock proteins (Hsps), one of the most highly conserved groups of proteins, play crucial roles in protecting cells against environmental stressors, such as temperature, salinity, heavy metals and pathogenic bacteria. The glutathione S-transferases (GST) have important role in detoxification of oxidative damage, environmental chemicals and environmental stress. The purpose of this study is to investigate the gene expression of Hsp70 and GST on change of temperature and salinity in Mytilus coruscus. The M. coruscus was cultured in incubator of separate temperature and salinity (8, 20, $30^{\circ}C{\times}20$‰, 25‰, 30‰) for 28 days. Ten individuals in each group were selected after each 14 and 28 days exposure. Results that the expression of Hsp70 mRNA was no significant changed in M. coruscus exposed to temperature ($8^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$) and salinity (20‰, 25‰, 30‰) for 14 days. Whereas the expression of Hsp70 mRNA was increased in exposure to temperature $30^{\circ}C$ and salinity (20‰, 25‰, 30‰) for 28 days. The expression of GST mRNA was increased in exposure to temperature $30^{\circ}C$, salinity (25‰, 30‰) for 14 days and temperature ($8^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$), salinity (20‰, 25‰, 30‰) for 28 days. These results suggest that Hsp70 and GST were played roles in biomarker gene on the thermal and salinity stress.

• 한국염색가공학회지
• /
• 제10권3호
• /
• pp.10-19
• /
• 1998

This paper investigates the change of mechanical properties and thermal shrinkage in commercial multi-filament PET(polyethylene terephthalate) , namely, regular yarn, POY, DTY and composite yarn. To determine changing the effects of processing steps, these were examined at three steps process simulation conditions. The first step is sizing simulation$(S-1\;step\;:\;130^\circ{C}\times2\;min$., hot air treatment under 0.1 gf/d load), the second step is scouring simulation$(S-2\;step\;:\;100^\circ{C}\times20\;min$., boiling water treatment under free tension)and final step is setting simulation$(S-3\;step\;:\;180^\circ{C}\times2\;min$., hot air treatment under free tension). Regular yarn in multi-step treatment showed higher shrinkage at S-3 step and DTY showed higher in at S-1 step. While POY was relaxed at S-1 step, composite yarn showed different shrinkage properties depending on composite yarn type. Mechanical properties showed good relationship with shrinkage : high shrinkage makes initial modulus decrease and bleating strain increase. It also makes decreasing yield strain and yield stress decrease.

• 한국수산과학회지
• /
• 제35권5호
• /
• pp.463-468
• /
• 2002

본 연구는 계절적으로 다른 수온에 순화되어 있는 패류에 대한 승온 효과를 분별하고 특히 시기별로 성장이 다른데 따른 승온 효과를 판별하기 위해 수행하였다. 실험 동물은 남해안 산 참굴, Crassostna gigas, 바지락, Ruditapes philippinarum 및 진주담치, Mytilus edulis의 3종이었으며 각 계절별로 채집하여 순화되어 있는 계절 수온과 순화 온도보다 4, 7 및 $10^{\circ}C$와 3, 6 및$ 9^{\circ}C$로 승온시킨 실험 해수에서 표준산소소비량과 여수량을 측정하였다. 생활사로 보아 가을에 치패기에 있는 참굴은 $14^{\circ}C$ 순화 수온 이상의 수온상승은 오히려 생리적 저해를 주었고 순화 수온이 $7^{\circ}C$인 겨울에는$ 9^{\circ}C$의 승온도 효과적이었다. 그러나 성재에서 여름에 순화 수온 $24^{\circ}C$ 이상의 승온은 저해를 주었다. 봄에 치패기에 있는 바지락은 순화수온보다 $6^{\circ}C$의 승온도 효과가 현저하였으나 그 이상의 수온 상승은 오히려 저해를 주었고 가을과 겨울에는 순화수온보다 온도가 $9^{\circ}C$까지 승온되어도 현저히 효과적이었다. 그러나 여름에는 순화수온 $24^{\circ}C$ 이상의 승온은 현저한 저해영향을 주었다. 진주담치는 봄 치패기에 순화수온보다 $3^{\circ}C$ 승온은 매우 효과적이었으나 그 이상 수온 상승은 저해를 주었다. 여름과 가을의 순화수온보다 높은 수온상승은 영향이 경미하였으며, 겨울에는 승온되어도 별다른 승온 효과를 보이지 않았다. 이상으로 보아 온배수의 승온 효과는 패류의 생활사 중 겨울에는 매우 효과적이었으나 치패기에 있어서는 순화 수온 보다 다소 높은 수온 상승도 오히려 저해 영향을 줄 수 있는 것으로 나타났다.

• 한국지반공학회논문집
• /
• 제35권7호
• /
• pp.41-50
• /
• 2019

국내 고준위폐기물처분장 공학적방벽(EBS)의 일부가 되는 완충재로 경주 벤토나이트가 우선적으로 고려되고 있다. 압축벤토나이트는 지하수침투로 인한 팽윤압과 처분용기에서 발산되는 열응력을 경험한다. 따라서 EBS의 성능평가를 위해서 역학적 물성의 산정이 중요하다. 본 논문은 탄성파를 이용하여 경주 압축벤토나이트의 변형특성 측정을 목표로 하였다. 두 개의 $1.59g/cm^3$와 $1.75g/cm^3$의 건조밀도를 가지는 압축벤토나이트 시편을 제작하였고, 자유단-자유단 공진주시험을 수행하여 구속압축파속도와 비구속압축파속도를 측정하였다. 측정된 압축파속도를 이용하여 미소변형에서의 탄성계수($E_{max}$), 구속탄성계수($M_{max}$), 감쇠비($D_{min}$), 포아송비를 측정하였다. 그 결과로 경주 압축벤토나이트의 변형특성을 산정 제시하여 선행연구 결과들과 비교 분석하였다.