• Membrane Journal
• /
• v.5 no.1
• /
• pp.35-43
• /
• 1995

For several years lots of attempts have been made to establish the liquid membrane-based techniques for separations of gas mixtures especially containing carbon dioxide. A more effective system to separate $CO_{2}$ from flue gases, a circulatory hollow-fiber membrane absorber(HFMA) consisting of absorption and desorption modules with vacuum mode, has been considered in this study. Gas-liquid mass transfer has been modeled on a membrane module with non-wetted hollow-fibers in the laminar flow regime. The influence of an absorbent flow rate on the separation performance of the circulatory HFMA can be predicted quantitatively by obtaining the $CO_{2}$ concentration profile in a tube side. The system of $CO_{2}/N_{2}$ binary gas mixture has been studied using pure water as an(inert) absorbent. As the absorbent flow rate is increased, the permeation flux(i.e., defined as permeation rate/membrane contact area) also increases. The enhanced selectivity compared to the previous results, on the other hand, shows the decreasing behavior. It has been found obviously that the permeation flux depends on the variations of pressure in gas phase of desorption module. From an accurate comparison with the results of conventional flat sheet membrane module, the advantageous permeability of this circulatory HFMA can be clearly ascertained as expected. Our efforts to the theoretical model will provide the basic analysis on the circulatory HFMA technique for a better design and process.

• Journal of the military operations research society of Korea
• /
• v.35 no.3
• /
• pp.119-138
• /
• 2009

Work and family are two major fields of one's life. In the past, the role of each gender has been separated, and there was no conflict between two fields. However, the increasing rate of working woman and the mode of social change that the male has also responsible of caring family and individuals has more interested in their personal life make consider these two fields as a whole. A number of studies have shown that OCB contribute in important ways to organizational functioning and performance. Whereas citizenship behavior may affect organizations in several positive ways, it is also possible that engaging in such behaviors could have negative consequences for the employees who do so. There may be other personal costs such as work-family conflict that accrue to individuals who engage in high levels of citizenship behavior. The purpose of this study is to investigate the moderating effect of the SOC strategy and Family Friendly Atmosphere on the negative effects of OCB on Work-Family Conflict. Questionnaire data were collected from 590 in different jobs. According to the result of empirical analysis, it proved that the more OCB effect on the more Work-Family Conflict. it also was found that the SOC strategy and Family Friendly Atmosphere moderate the relation between OCB and Work-Family Conflict. At the end of the paper, theoretical and managerial implications of this study, future research directions are discussed.

• Journal of Practical Engineering Education
• /
• v.12 no.1
• /
• pp.49-60
• /
• 2020

With the advent of the knowledge-based era of the fourth industrial revolution, a paradigm shifts in university education. As a complete overhaul of university educational methods is required, strengthening competence through personalized is emerging as one of the solutions to the problem. To provide appropriate education accordingly focusing on individual learners, more studies at various levels are needed about understanding the characteristics of learners and ways to support them at universities. This study aims to conduct an exploratory research for adapting personalized learning at K University and explore effective ways to support. First, through literature review, the theoretical basis of personalized learning considering the diverse characteristics of learners and domestic and overseas cases of are examined. Secondly, a pilot study is conducted with K University students as subjects. FGI, study style diagnosis, one-on-one follow-up interviews are conducted and competency-based learning performance analysis and study style diagnosis result paper are provided to selected participants. Finally, major issues and implications are suggested to support the effective personalized learning of K university students.

• The KIPS Transactions:PartC
• /
• v.17C no.1
• /
• pp.119-128
• /
• 2010

In the shipbuilding industry, due to the global trends where the number of IT (Information Technology) devices of a smart ship have been increased rapidly, the need to develop a new shipboard backbone network has recently emerged for integrating and managing the IT devices of a smart ship efficiently. A shipboard backbone network requires high survivability because it is constructed in automatic and unmanned smart ships where a failure of the backbone network can cause critical problems. The purpose of this paper thus is to study SAN (Ship Area Network) as a efficient shipboard backbone network, considering particularity of shipboard environment and requirement of high survivability. In order to do so, we designed a dual network topology that all network nodes, including the IT devices installed in a smart ship, are connected each other through dual paths, and reuding tht IT devices pnstalles supporices network survivability as well as t Iffic efficiency for the dual network topology. And then, we verified the performance of the suggested SAN by theoretical and practical analysis including the graph theory, the probability theory, implemental specifications, and computer simulations.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.2
• /
• pp.181-192
• /
• 2013

Given both structural safety and economic benefits of aging facilities, remodelling of the existing facilities is preferable to reconstruction. This recognition provides an opportunity to reduce the commitment of resources and national budget. However, when a subordinate troop asks for remodeling or reconstruction of a deteriorated facility, it is difficult to ensure the consistency and objectivity in the process of decision making for the alternatives due to the absence of systematic and quantitative rating methodology. Their economic evaluation methodology only exists in a manual format. Thus, further research is required for converting the methodology into an automated system in view of practicality such as rapid and accurate data processing. The contributions of this study are as follows: 1) Literature review found out a representative economic evaluation model focused on military facilities, and comparative analysis with a similar study identified the strength and weakness. 2) this study presented how to convert the theoretical framework which enables to solve a specific subject matter into an automated system. 3) it developed a user friendly interfaces which consist of four functional modules by considering the usability and accessibility of the system user. 4) the developed system was verified by a case study in terms of four kinds of performance indicators.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.4 s.74
• /
• pp.429-440
• /
• 2006

This paper comprises two specific objectives. The first is to examine the applicability of ordinary kriging interpolation(OK) to the p-adaptivity of the finite element method that is based on variogram modeling. The second objective Is to present the adaptive procedure by the hierarchical p-refinement in conjunction with a posteriori error estimator using the modified S.P.R. (superconvergent patch recovery) method. The ordinary kriging method that is one of weighted interpolation techniques is applied to obtain the estimated exact solution from the stress data at the Gauss points. The weight factor is determined by experimental and theoretical variograms for interpolation of stress data apart from the conventional interpolation methods that use an equal weight factor. In the p-refinement, the analytical domain has to be refined automatically to obtain an acceptable level of accuracy by increasing the p-level non-uniformly or selectively. To verify the performance of the modified S.P.R. method, the new error estimator based on limit value has been proposed. The validity of the proposed approach has been tested with the help of some benchmark problems of linear elastic fracture mechanics such as a centrally cracked panel, a single edged crack, and a double edged crack.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.572-577
• /
• 2008

In order to apply strategic advanced project management to the Korean construction industry, the study conducted a comparative analysis of the project management body of knowledge of the advanced countries such as the USA and Japan as well as Europe. As a result, it was found that the connection to 'execution' of 'strategy' was highlighted as a common main issue in the theoretical background of project management body of knowledge, and strategic planning, which aligns 'program management' based on the integration of multiple project management and operations in single project with 'portfolio management' for selection and concentration, has been emphasized. Accordingly, the study built up the framework for the application of strategic advanced project management for strategic action in the Korean construction industry and proposed the following applicable solutions for implementation into the current Korean construction industry: 1) Innovate global competitiveness by preparing an 'ideology and philosophy' for the strategic action of an organization, 2) Establish a strategic 'environment' in consideration of the culture and structure of an organization, 3) Propose a strategic 'vision' for attaining a realizable goal within an organization, 4) Create an 'investment' on the portfolio in line with the strategy, 5) 'Execute' the program through the portfolio and project management. Lastly, the study brought up strategies for sustainable growth by applying strategic advanced project management to the Korean construction industry with a view to acquiring 'Performance' through the implementation and operation of their integrated system.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.4
• /
• pp.355-362
• /
• 2012

Remaining useful life(RUL) prediction of a system is important in the prognostics field since it is directly linked with safety and maintenance scheduling. In the physics-based prognostics, accurately estimated model parameters can predict the remaining useful life exactly. It, however, is not a simple task to estimate the model parameters because most real system have multivariate model parameters, also they are correlated each other. This paper presents representative methods to estimate model parameters in the physics-based prognostics and discusses the difference between three methods; the particle filter method(PF), the overall Bayesian method(OBM), and the sequential Bayesian method(SBM). The three methods are based on the same theoretical background, the Bayesian estimation technique, but the methods are distinguished from each other in the sampling methods or uncertainty analysis process. Therefore, a simple physical model as an easy task and the Paris model for crack growth problem are used to discuss the difference between the three methods, and the performance of each method evaluated by using established prognostics metrics is compared.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.1
• /
• pp.97-104
• /
• 2015

This study is a part of the high pressure injection system development on the Turbo GDI engine in order to reduce smoke emission in case of using the low volatile(high DI) fuel which is used as normal gasoline fuel in the US market. Firstly, theoretical approach was done regarding gasoline fuel property, performance, definition of particle matters and its creation as well as problems of the high DI fuel. In this experimental study, 2L Turbo GDI engine was selected and optimized system parameter was inspected by changing fuel, fuel injection mode (single/multiple), fuel pressure, distance between injector tip and combustion chamber, start of injection, intake valve timing in engine dyno at all engine speed range with full load. In case of normal gasoline fuel, opacity was contained within 2% in all conditions. On the other hands, in case of low volatile fuel (high DI fuel), it was confirmed that the opacity was rapidly increased above 5,000 rpm at 14.5 ~ 20 MPa of fuel pressure and there were almost no differences on the opacity(smoke) between 17 MPa and 20 MPa fuel pressure. According to the SOI retard, smoke decrease tendency was observed but intake valve close timing change has almost no impact on the smoke level in this area. Consequently, smoke decrease was observed and 16% at 6000rpm respectively with injector washer ring installed. By removing injector washer to make injector tip closer to the combustion chamber, smoke decrease was observed by 46% at 5,500 rpm, 42% at 6,000 rpm. It is assumed that the fuel injection interaction with cylinder head, piston head, intake and exhaust valve is reduced so that impingement is reduced in local area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.725-731
• /
• 2016

This study numerically investigates the thermal performance of a 2.0-kW butane-based combustion heating system for an electric vehicle under cold conditions. The system is used for cabin space heating and coolant-based battery thermal management. ANSYS CFX 17 software was used for parametric analysis. The mass flow rates of cold air and coolant were varied, and their effects were compared. The numerical results were validated with theoretical studies, which showed an error of 0.15%. As the outside air mass flow rates were increased to 0.005, 0.01, and 0.015 kg/s, the cabin supply air temperature decreased continuously while the coolant outlet temperature increased. When the coolant mass flow rates were increased to 0.005, 0.01 and 0.015 kg/s, the air temperature increased while the coolant outlet temperatures decreased. The optimal mass flow rates are discussed in a consideration of the requirements for high cabin heating capacity and efficient battery thermal management.