• Asia pacific journal of information systems
• /
• 제12권1호
• /
• pp.45-65
• /
• 2002

Factors influencing the success or failure of information systems(IS) have been discussed in many literature. However, limited theoretical development or empirical research have examined the effectiveness of hospital information systems(HIS). This study set out the research model of influencing factors and the performance of HIS through theoretical studies based on Management Information Systems, and then empirically tested hypotheses related to the model. The model was tested using LISREL analysis on the sample of 274 respondents who have worked with the HIS. The major results of this study are as follows: First, system characteristics and organizational characteristics have a statistically significant influence on user satisfaction. Second, the hypothesis 3, proposing that computer self-efficacy would relate positively to user satisfaction, was not supported by the results, though. According to these results, system quality, information quality, service quality and support of top management are very important variables for IS success. The study's findings also indicate DeLone and McLean's model is correct in proposing that the indirect relationship between influencing factors and organizational effectiveness, mediated by user satisfaction, is an important one.

• 한국추진공학회지
• /
• 제4권3호
• /
• pp.1-10
• /
• 2000

본 연구에서는 아음속/음속 이젝터의 성능을 평가하고, 공학적 설계를 위한 기초적 연구의 일환으로 일차원 기체역학 이론을 이용하여 이론해석을 수행하였다. 이론해석에서는 1차노즐의 유량계수, 디퓨저의 손실계수를 도입하여, 아음속/음속 이젝터의 목면적비, 유량비, 2차정체실의 압력 등을 이젝터 압축비의 함수로 도출하였다 본 연구에서 제시된 이론해석법은 아음속/음속 이젝터의 성능을 평가하는데 유용할 뿐만 아니라 이젝터 설계를 위한 자료로 활용될 수 있다.

• Structural Monitoring and Maintenance
• /
• 제6권3호
• /
• pp.255-268
• /
• 2019

Civil infrastructures, such as bridges and tunnels are most important assets and their failure during service will have significant economic and social impact in any country. Behavior of a bridge can be evaluated only through actual monitoring/measurements of bridge members under the loads of interest. Theoretical analysis alone is not a good predictor of the ability of a bridge. In some cases, theoretical analyses can give less effect than actual since theoretical analyses do not consider the actual condition of the bridge, support conditions, level of corrosion and damage in members and connections etc. Hence actual measurements of bridge response should be considered in making decisions on structural integrity, especially in cases of high value bridges (large spans and major crossings). This paper describes in detail the experimental investigations carried out on an open web type steel railway bridge. Strain gages and displacement transducers were installed at critical locations and responses were measured during passage of locomotives. Stresses were evaluated and extrapolated to maximum design loading. The responses measured from the bridge were within the permissible limits. The methodology adopted shall be used for assessing the structural integrity of the bridge for the design loads.

• Steel and Composite Structures
• /
• 제17권2호
• /
• pp.173-184
• /
• 2014

This study aimed to theoretical calculate the thermal residual stress in continuous SiC fiber reinforced titanium matrix composites. The analytical solution of residual stress field distribution was obtained by using coaxial cylinder model, and the numerical solution was obtained by using finite element model (FEM). Both of the above models were compared and the thermal residual stress was analyzed in the axial, hoop, radial direction. The results indicated that both the two models were feasible to theoretical calculate the thermal residual stress in continuous SiC fiber reinforced titanium matrix composites, because the deviations between the theoretical calculation results and the test results were less than 8%. In the titanium matrix composites, along with the increment of the SiC fiber volume fraction, the longitudinal property was improved, while the equivalent residual stress was not significantly changed, keeping the intensity around 600 MPa. There was a pronounced reduction of the radial residual stress in the titanium matrix composites when there was carbon coating on the surface of the SiC fiber, because carbon coating could effectively reduce the coefficient of thermal expansion mismatch between the fiber and the titanium matrix, meanwhile, the consumption of carbon coating could protect SiC fibers effectively, so as to ensure the high-performance of the composites. The support of design and optimization of composites was provided though theoretical calculation and analysis of residual stress.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 한국컴퓨터종합학술대회 논문집 Vol.33 No.1 (A)
• /
• pp.400-402
• /
• 2006

Matrix multiplication is an important problem in linear algebra. its main significance for combinatorial algorithms is its equivalence to a variety of other problems, such as transitive closure and reduction, solving linear systems, and matrix inversion. Thus the development of high-performance matrix multiplication implies faster algorithms for all of these problems. In this paper. we present a quantitative comparison of the theoretical and empirical performance of key matrix multiplication algorithms and use our analysis to develop a faster algorithm. We propose a Hybrid approach on Winograd's and Strassen's algorithms that improves the performance and discuss the performance of the hybrid Winograd-Strassen algorithm. Since Strassen's algorithm is based on a $2{\times}2$ matrix multiplication it makes the implementation very slow for larger matrix because of its recursive nature. Though we cannot get the theoretical threshold value of Strassen's algorithm, so we determine the threshold to optimize the use of Strassen's algorithm in nodes through various experiments and provided a summary shown in a table and graphs.

• Structural Engineering and Mechanics
• /
• 제87권2호
• /
• pp.117-127
• /
• 2023

To efficiently attenuate seismic responses of a structure, a novel pneumatic-driven active dynamic vibration absorber (PD-ADVA) is proposed in this study. PD-ADVA aims to realize closed-loop control using a simple and intuitive control algorithm, which takes the structure velocity response as the input signal and then outputs an inverse control force to primary structure. The corresponding active control theory and phase control mechanism of the system are studied by numerical and theoretical methods, the system's control performance and amplitude-frequency characteristics under seismic excitations are explored. The capability of the proposed active control system to cope with frequency-varying random excitation is evaluated by comparing with the optimum tuning TMD. The analysis results show that the control algorithm of PD-ADVA ensures the control force always output to the structure in the opposite direction of the velocity response, indicating that the presented system does not produce a negative effect. The phase difference between the response of uncontrolled and controlled structures is zero, while the phase difference between the control force and the harmonic excitation is π, the theoretical and numerical results demonstrate that PD-ADVA always generates beneficial control effects. The PD-ADVA can effectively mitigate the structural seismic responses, and its control performance is insensitive to amplitude. Compared with the optimum tuning TMD, PD-ADVA has better control performance and higher system stability, and will not have negative effects under seismic wave excitations.

• 한국정밀공학회지
• /
• 제17권2호
• /
• pp.151-160
• /
• 2000

An experimental and theoretical analysis for the improvement of dynamic characteristics and design of electro-hydraulic flow control servo valve are performed. The theoretical results are compared with the experimental step responses, and the important design parameters of an electro-hydraulic flow control servo valve are derived by using the simulation program. Simulation parameters of nozzle jet coefficient and orifice and spool valve discharge coefficient are given through experiment. The theoretical and experimental step response curves show that the valve gain depends on the fixed orifice and nozzle $ratio(R_on)$ and is maximum at $R_on=1.$ And drain orifice in the flapper - nozzle return line creates a small back pressure, which improves the performance fur the valve.

• Smart Structures and Systems
• /
• 제28권6호
• /
• pp.839-853
• /
• 2021

In this paper, a novel multimode liquid metal-based pressure sensor is developed. The main body of the sensor is composed of polydimethylsiloxane (PDMS) elastomer. The structure of the sensor looks like a sandwich, in which the upper structure contains a cylindrical cavity, and the bottom structure contains a spiral microchannel, and the middle partition layer separates the upper and the bottom structures. Then, the liquid metal is injected into the top cavity and the bottom microchannel. Based on linear elastic fracture mechanics, the deformation of the microchannel cross-section is theoretically analyzed. The changes of resistance, capacitance, and inductance of the microchannel under pressure are deduced, and the corresponding theoretical models are established. The theoretical values of the pressure sensor are in good agreement with experimental data, implying that the developed theoretical model can explain the performance of the sensor well.

• The Journal of Asian Finance, Economics and Business
• /
• 제6권3호
• /
• pp.295-304
• /
• 2019

The study aims to investigate the determinant factors in the organisation of a firm's innovative activities, and the impact of innovation capability on firm's performance of electronic firms in Ho Chi Minh city, Vietnam. How is the performance of electronic companies after delivering an innovation project? How will innovation capability affect firm's performance in electronic companies? This study aims to seek the answer of these questions. We employ a Structural Equation Model and the PLS technique in order to validate the theoretical model proposed in this study. With observation of 374 valid firms, based on Cronbach's Alpha analysis, EFA analysis, CFA analysis and SEM analysis, this study discovers 5 groups of factors including: (i) Institution factors; (ii) Attitude of leadership factors; (iii) Marketing factors; (iv) Technological resources factors; (v) Combination factors, which have direct impact on innovation capability of firms. There are 4 groups of factors that have positive impacts on financial performance of electronic firms, with descending order of importance as follows: (1) Attitude of leadership factors; (2) Quality of human resources factors; (3) Innovation capability; (4) Marketing activities factors. Research results are important implications for Government administrative agencies for business to consult and introduce effective support policies.

• 반도체디스플레이기술학회지
• /
• 제22권2호
• /
• pp.45-49
• /
• 2023

When blockchain technology, which shows various applicability, is utilized as a component of a database system, the characteristics of open verification and integrity/transparency of blockchain technology can bring new functionalities or enhanced results to the existing database system. However, when applying this blockchain technology to a database system, the cost versus expected effect in various performance perspectives must be evaluated. These costs include execution time and required storage space, and the performance of the converged system may vary in analysis method depending on the configuration method of the characteristics of the blockchain. This paper aims to propose an analysis model for the entire architecture by considering aspects that are not considered in the performance analysis models of database systems and the unique characteristics of blockchains. In doing so, we are trying to build a theoretical framework as an important conceptual technique that should be considered in the evaluation process of the performance results that can be obtained through the utilization of blockchain components in database systems. What we hope is that this work is expected to provide a useful foundation for researchers interested in the convergence of database systems and blockchain technology in order to construct a system with new future functionalities.