Research on residual stress in SiCf reinforced titanium matrix composites |
Qu, Haitao
(Beijing Aeronautical Manufacturing Technology Research Institute)
Hou, Hongliang (Beijing Aeronautical Manufacturing Technology Research Institute) Zhao, Bing (Beijing Aeronautical Manufacturing Technology Research Institute) Lin, Song (Shijiazhuang Tiedao University) |
1 | Thomas, M.P. and Winstone, M.R. (1999), "Longitudinal yielding behaviour of SiC-fibre-reinforced titanium-matrix composites", Compos. Sci. Tech., 59(2), 297-303. DOI ScienceOn |
2 | Oddershede, J., Schmidt, S., Poulsen, H.F., Sorensen, H.O., Wright, J. and Reimers, W. (2010), "Determining grain resolved in polycrystalline materials using three-dimensional X-ray diffraction", J. Appl. Crystallogr., 43, 539-549. DOI |
3 | Qu, H.T., Ren, X.P., Hou, H.L., Zhao, B. and Li, S.X. (2011), "Interfacial behaviors in SiC fiber reinforced titanium matrix composites during thermal exposure", Adv. Mater. Res., 295-297, 880-885. DOI |
4 | Vassel, A. (1999), "Continuous fibre reinforced titanium and aluminium composites: A comparison", Mater. Eng. A, 263(2), 305-313. DOI |
5 | Warrier, S.G., Rangaswamy, P., Bourke, M.A.M. and Krishnamurthy, S. (1999), "Assessment of the fiber/matrix interface bond strength in SiC/Ti-6Al-4V composites", Mater. Sci. Eng. A, 259(2), 220-227. DOI ScienceOn |
6 | Warwick, C.M. and Clyne, T.W. (1991), "Development of composite coaxial cylinder stress analysis model and its application to SiC monofilament systems", J. Mater. Sci., 26(14), 38177-3827. |
7 | Woo, W., Em, V., Mikula, P., An, G.B. and Seong, B.S. (2011), "Neutron diffraction measurements of residual stresses in a 50 mm thick weld", Mater. Sci. Eng. A, 528(12), 4120-4124. DOI ScienceOn |
8 | Wood, M. and Close, M.W. (1995), "Fibre-reinforced intermetallic compounds by physical vapour deposition", Mater. Sci. Eng. A, 192/193(2), 590-596. DOI |
9 | Gundel, D.B. and Wawner, F.E. (1996), "Experimental and theoretical assessment of the longitudinal tensile strength of unidirectional SiC-fiber/titanium-matrix composites", Compos. Sci. Tech., 57(4), 471-481. |
10 | Arsenault, R.J. and Taya, M. (1987), "Thermal residual stress in metal matrix composite", Acta Metall., 35(3), 651-659. DOI ScienceOn |
11 | Feillard, P. (1996), "The high temperature behavior of long fibre reinforced titanium under transverse loading", Acta Metallurgica, 44(2), 643-656. |
12 | Fukushima, A., Fujiwara, C., Kagawa, Y. and Masuda, C. (2000), "Effect of interfacial properties on tensile strength in SiC/Ti-15-3 composites", Mater. Sci. Eng. A, 276(1-2), 243-249. DOI |
13 | Gundel, D.B., Warrier, S.G. and Miracle, D.B. (1999), "The transverse tensile behavior of SiC fiber/Ti-6Al-4V composites: 2. Stress distribution and interface failure", Compos. Sci. Tech., 59(7), 1087- 1096. DOI |
14 | Majumdar, B.S. (1999), "Development and characterization of new coatings for improved balance of mechanical properties of titanium matrix composites", Mater. Sci. Eng. A, 259(2), 171-188. DOI |
15 | Li, J.K., Yang, Y.Q., Luo, X., Yuan, M.N., Li, L.L. and Zhang, L.W. (2008), "Thermal residual stress in continuous SiC fiber reinforced titanium matrix composites", Rare Metal Mater. Eng., 37(4), 621-624. |
16 | Lou, J.H., Yang, Y.Q., Luo, X., Yuan, M.N. and Feng, G.H. (2010), "The analysis on transverse tensile behavior of SiC/Ti-6Al-4V", Mater. Des., 31(8), 3949-3953. DOI |
17 | Ma, Z.J., Yang, Y.Q., Zhu, Y. and Chen. Y. (2004), "Effect of fiber distribution on residual thermal stress in titanium matrix composite", Trans. Nonferrous Met. Soc. China, 14(2), 330-334. |
18 | Mao, W.G., Chen, Q., Dai, C.Y., Yang, L., Zhou, Y.C. and Lu, C. (2010), "Effects of piezo-spectroscopic coefficients of 8 wt.% stabilized on residual stress measurement of thermal barrier coatings by Raman spectroscopy", Surf. Coat. Tech., 204, 3573-3577. DOI |
19 | Mikata, Y. and Taya, M. (1985), "Stress field in a coated continuous fiber composite subjected to thermo-mechanical loadings", J. Compos. Mater., 19(6), 554-578. DOI ScienceOn |
20 | Huang, B., Yang, Y.Q., Luo, H.J. and Yuan, M.N. (2009), "Effects of the coating system and interfacial region thickness on the thermal residual stresses in composites", Mater. Des., 30(3), 718-722. DOI ScienceOn |
21 | Subramanian, P.R., Krishnamurthy, S., Keller, S.T. and Mendiratta, M.G. (1998), "Processing of continuously reinforced Ti-alloy metal matrix composites(MMC) by magnetron sputtering", Mater. Sci. Eng. A, 244(1), 1-10. DOI ScienceOn |