• 한국가시화정보학회지
• /
• 제17권2호
• /
• pp.83-89
• /
• 2019

In this study, we show the maximum cavity radius prediction model that a droplet impacts an inclined bath. Surface tensions, viscosities, inclination angles of a bottom substrate, droplet diameters, falling heights of the droplet are varied for the experiment. We experimentally observe that the cavity grows in hemispherical shape like the cavity formed in a deep bath although the depth of the bath is non-uniform due to an inclined bottom substrate. We derive two theoretical models to predict the experimental results of the fully developed cavity. Although each model has error, we observe that qualitatively theoretical model predicts the trend of experiment results well.

• Advances in materials Research
• /
• 제9권4호
• /
• pp.265-287
• /
• 2020

A theoretical method to predict the interfacial stresses in the adhesive layer of reinforced concrete beams strengthened with porous FRP plate is presented in this paper. The effect due to porosity is incorporated utilizing a new modified rule of mixture covering the porosity phases. The adherend shear deformations have been included in the present theoretical analyses by assuming a linear shear stress through the thickness of the adherends. Remarkable effect of the porosity has been noted in the results. Indeed, the resulting interfacial stresses concentrations are considerably smaller than those obtained by other models which neglect the porosity effect. It was found that the interfacial stresses are highly concentrated at the end of the FRP plate, the minimization of the latter can be achieved by using porous FRP plate in particular at the end. It is also shown that the interfacial stresses of the RC beam increase with volume fraction of fibers, but decrease with the thickness of the adhesive layer.

• Journal of Korean Vacuum Science & Technology
• /
• 제6권2호
• /
• pp.76-78
• /
• 2002

We have carried out the first-principle electronic structure calculations to investigate the spacer layer formation of Fe/Si multilayered films (MLF) and compared with the results obtained by optical spectroscopy. The computer-simulated spectra based on various structural models of MLF showed that neither FeSi$_2$ nor B2O-phase FeSi, which are semiconducting, could be considered as the spacer layers in the Fe/Si MLF for the strong antiferromagnetic coupling. The optical properties of the spacer extracted from the effective optical response of the MLF strongly support its metallic nature. The optical conductivity spectra of various phases of Fe-Si compounds were calculated and compared with the extracted optical properties of the spacer. From the above theoretical investigations it is concluded that a E2-phase metallic FeSi compound is spontaneously formed at the interfaces during deposition.

• 영재교육연구
• /
• 제17권2호
• /
• pp.223-250
• /
• 2007

1992년 제6차 교육과정에서부터 도입된 초등학교 학교교육과정개발 정책은 단위 학교에서 영재들을 위한 교육과정을 개발하여 교육할 것을 주문하고 있다. 연구자는 그 활동을 돕기 위해 초등학교 영재들을 위한 학교교육과정 개발 모형을 구안하여 제시하였다. 본 모형은 VanTassel-Baska의 통합적 교육과정 모델(ICM: Integrated Curriculum Model)을 초등교육의 정체성에 비추어 재구성한 것으로서, ICM의 하위모델인 내용 모델, 과정 산출 모델, 인식론적 모델을 초등학교 $1{\sim}6$학년 아동들의 발달단계에 적절하게 그 적용 비중을 조절하는 것을 특징으로 하고 있다. 본 모형은 초등학교 영재 탤런트 풀을 대상으로 한 교육과정 개발의 일반 모형인 동시에, 영재 개개인의 특성과 요구에 따라서도 그 적용 비중이 달라질 수 있는 개인 모델로서도 기능할 수 있을 것이다.

• 환경영향평가
• /
• 제14권6호
• /
• pp.427-441
• /
• 2005

In order to choose proper dispersion model and emission factors suitable in Korea in evaluating the effect of pollutants emitted by the vehicles in highway on nearby area, various road dispersion models and vehicle emission factors were reviewed. With theoretical inter-comparisons of the exiting models for line source, CALINE 3 and CALINE 4 models which were suggested by US EPA were selected as the road dispersion models for further evaluation with the measurement. The emission factors suggested by Korean Ministry of Environment was turned out to be appropriate since the classification of vehicle kinds was simple and easy to apply in Korea. The comparisons of predicted concentrations by CALINE 3 and 4 models with the measurements in flat, fill and bridge road types showed that CO and PM-10 were in good agreements with experiments and the differences between CALINE 3 and 4 models are negligible. The model concentrations of $NO_2$ by CALINE 4 were also in good agreement with the measurement but those by CALINE 3 were over-predicted. The discrepancies in CALINE 3 model were due to rapid decay reaction of $NO_2$ near the highway, which was not included in CALINE 3 model. For the road type with one & two side cutting grounds, the similar patterns as the flat & fill road type for CO, PM10, & $NO_2$ were observed but the number of data for comparison in these cases were not enough to draw the conclusion. These results lead to the conclusion that CALINE4 model is proper in road environmental impact assessment near the highway in flat, fill and bridge road types.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권spc호
• /
• pp.75-91
• /
• 2022

Differences in subsurface migration of LNAPL/DNAPL contaminants caused by a selection of 3-phase (aqueous, NAPL, and gas) relative permeability function (RPF) models in numerical modeling were investigated. Several types of RPF models developed from both experimental and theoretical backgrounds were introduced prior to conducting numerical modeling. Among the RPF models, two representative models (Stone I and Parker model) were employed to simulate subsurface LNAPLs/DNAPLs migration through numerical calculation. For each model, the spatiotemporal distribution of individual phases and the mole fractions of 6 NAPL components (4 LNAPL and 2 DNAPL components) were calculated through a multi-phase and multi-component numerical simulator. The simulation results indicated that both spilled LNAPLs and DNAPLs in the unsaturated zone migrated faster and reached the groundwater table sooner for Stone I model than Parker model while LNAPLs migrated faster on the groundwater table under Parker model. This results signified the crucial effect of 3-phase relative permeability on the prediction of NAPL contamination and suggested that RPF models should be carefully selected based on adequate verification processes for proper implementation of numerical models.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2672-2677
• /
• 2007

An investigation of low Reynolds number flow in nozzles and diffusers which are widely used in the valveless micropump is presented. Flow characteristics in the nozzle and diffuser are explained in view of viscous effect and flow oscillation induced by pumping membrane. These calculation results show that the rectification property of valveless micropump is due to a flow separation in the diffuser and the separation is largely originated from the flow oscillation. Under the assumptions of steady flow velocity profile and flow separation in the diffuser, simplified analytical models are provided to see the dependency of rectification on the micropump geometry. Geometric parameters of channel length, nozzle throat, chamber size, and converging/diverging angle are depicted through the analytical models in low Reynolds number flow, and the prediction and experimental results are compared. This theoretical study can be used to determine the optimum geometry of valveless micropump.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1996년도 학술발표회
• /
• pp.37-42
• /
• 1996

The assessment of catastrophic accidents such as BLEVE, vapor cloud explosion, and toxic material releases in the chemical process industries(CPI) shall be carried out according to the Requirement of PSM/SMS enforced by Korea Government Agencies, but reasonable models are not proposed for the practical application. The traditional models, TNT Equivalency Model, are well-known and helpful for the assessment of vapor cloud explosion. However, the estimated-damage-area using the traditional model has much more deviations comparing to the real damage caused by vapor cloud explosion suffered before. These are why an expert system for the assessment of vapor cloud explosion has been developed, which is based on theoretical, statistical and experimental data, and it would be helpful for CPI to evaluate the damage-area in case of vapor cloud explosion.

• 한국정보시스템학회:학술대회논문집
• /
• 한국정보시스템학회 1996년도 추계학술발표회 발표논문집
• /
• pp.29-48
• /
• 1996

Previous studies on user training have largely focused on assessing models which describe the determinants of information technology usage or examined the effects of training on user satisfaction, productivity, performance, and so on. Scant research efforts have been made, however, to examine those effects of training by using theoretical models. This study presented a conceptual model to predict intention to use information technology and conducted an experiment to understand how training for computer skill acquisition affects primary variables of the model. The data were obtained from 32 student subjects of an experimental group and 31 students of a control group, and the information technology employed for this study was a university's electronic mail system. The study results revealed that attitude toward usage and perceived behavioral control helped to predict user intentions; outcome expectations were positively related to attitude toward usage; and self - efficacy and perceived behavioral control. The changes in those variables suggest more causal effects of user training than other survey studies.

• 지식경영연구
• /
• 제7권2호
• /
• pp.13-34
• /
• 2006

This paper is an exploratory study to analyze the flow of knowledge in science and technology in order to predict technology innovation. Here, we need to look into the characteristics of how knowledge is created in science, technology and industry to start with. Based on the characteristics we find, we have to understand the relationships between science, technology and industry, and construct a model to link them to each other for future empirical studies. In this study, we take a general view of the existing study results and theoretical models on the characteristics and linkage of scientific and technological knowledge. Moreover, we examine the preliminary framework to link science to technology to industry for further study on the knowledge flow of science and technology. Finally, we present the direction for future study by using the examined models and framework.