• 한국재료학회지
• /
• 제18권11호
• /
• pp.592-596
• /
• 2008

Spring constants (displacement per unit applied load) of MEMS socket pins of given structures were computed by theoretical analysis and confirmed by the finite element method (FEM). In the theoretical analysis, the displacement of pins was calculated based on the 2-dimensional bending theory of the curved beam. For the 3-dimensional modeling, CATIA was used. After modeling, the raw data were transferred to ANSYS, which was employed in the 3-dimensional analysis for the calculation of the stress and strain and loaddisplacement The theoretical analysis and the FEM results were found to agree, with each showing the spring constants as 63.4 N/m within a reasonable load range. These results show that spring constants can be easily obtained through theoretical calculation without resorting to experiments and FEM analysis for simple and symmetric structures. For the some change of shape and structural stiffness, this theoretical analysis can be applied to MEMS socket pins.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1521-1526
• /
• 2008

IPMC(Ionic Polymer-Metal Comosite) exhibits large deformation, having great attention in many application fields. It generates bending moment by ion exchange polymer film. It can be quickly bended by the applied voltage across the plated electrode of the polymer film. In the present paper, we derive the theoretical modeling and dynamic analysis of bending motions of IPMC actuators using the Euler-Bernoulli beam theory. The theoretical model of a cantilever IPMC actuator estimates the moment produced by the applied voltage. The dynamic characteristics, including natural frequencies and frequency response, are calculated by the theoretical model, and they are compared with the experimental results and finite element analysis. It is shown that the mathematical modeling allows precise estimation to the voltage-driven motion of the cantilever IPMC in air.

• Journal of electromagnetic engineering and science
• /
• 제1권1호
• /
• pp.60-62
• /
• 2001

A novel approach for modeling the thermic endfire interstitial applicator is presented. A hypothetical semi-infinite circular cylinder is added in the endfire direction in order to facilitate the theoretical modeling approach. The Fourier transform and mode-matching technique is utilized to obtain a solution in fast-convergent series Numerical computations for the input impedance are performed to check the Validity of the theoretical model.

• Journal of Information Technology Applications and Management
• /
• 제18권4호
• /
• pp.95-118
• /
• 2011

In developing information systems, conceptual modeling is among the most fundamental means. The importance attributed to conceptual modeling has not only given rise to a lot of modeling methods, but also to the "yet another modeling approach (YAMA)" syndrome and the "not another modeling approach (NAMA)" hysteria. Criticism of conceptual modeling methods usually targets their lacking of theoretical foundations. In response to such criticism, various approaches towards theoretical foundations of conceptual modeling have been proposed so far. One of the recent responses to the quest for theoretical foundations of conceptual modeling is the reference to the philosophical ontology. The currently most prominent of diverse approaches towards ontological foundations of conceptual modeling appears to be the Bunge-Wand-Weber (BWW) ontology. Recent approaches attempt to regard BWW ontology as another conceptual data model as well as a criterion for evaluating various conceptual models. However, unfortunately, relatively few researches have been made on interoperability between the Entity-Relationship (ER) model, which is the most dominant conceptual data model, and ontology based model. In this paper, we investigate the interoperability between ontology and the ER model. In detail we (i) reclassify components of ER model with respect to ontology concepts, (ii) identify some components that cannot be directly represented in ontology notation, and (iii) present alternative representations to the components to acquire ontologically clear ER diagrams. Additionally, we (iv) present a set of mapping rules for converting the ontologically clear ER diagram into the corresponding ontology. In a case study, we show the process of converting an ER diagram for a concise Project Management System (PMS) into the ontologically clear ER diagram and the corresponding ontology. We also describe an experiment that we undertook to test whether users understand the Ontologically-Clear ER diagram better.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.1-5
• /
• 2002

This paper is concerned with the dynamic modeling of a rectangular plate with piezoelectric actuators and sensors. The experimental frequency response plots can be used to verify the theoretical modeling. Theoretical analysis will follow.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.309.1-309
• /
• 2002

This paper is concerned with the dynamic modeling of a rectangular plate with piezoelectric actuators and sensors. The experimental frequency response plots can be used to verify the theoretical modeling. The active vibration control was achived by using positive position feedback controller. Theoretical analysis will follow.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.483-488
• /
• 2002

This paper is concerned with the experiments on the dynamic characteristics and modeling of plate with piezoceramic sensors and actuators. The experimental frequency response plots can be used to verify the theoretical modeling. Theoretical analysis will follow.

• International Journal of Computer Science & Network Security
• /
• 제21권1호
• /
• pp.84-96
• /
• 2021

Certainly, the success of the Unified Modeling Language (UML) as the de facto standard for modeling software systems does not imply closing the door on scientific exploration or experimentation with modeling in the field. Continuing studies in this area can produce theoretical results that strengthen UML as the leading modeling language. Recently, a new modeling technique has been proposed called thinging machine (TM) modeling. This paper utilizes TM to further understand UML, with two objectives: (a) Fine issues in UML are studied, including theoretical notions such as events, objects, actions, activities, etc. Specifically, TM can be used to solve problems related to internal cross-diagram integration. (b) TM applies a different method of conceptualization, including building a model on one-category ontology in contrast to the object-oriented paradigm. The long-term objective of this study is to explore the possibility of TM complementing certain aspects in the UML methodology to develop and design software systems. Accordingly, we alternate between UML and TM modeling. A sample UML model is redesigned in TM, and then UML diagrams are extracted from TM. The results clarify many notions in both models. Particularly, the TM behavioral specification seems to be applicable in UML.

• Structural Engineering and Mechanics
• /
• 제56권4호
• /
• pp.535-548
• /
• 2015

A series of experimental results on thin mild steel plates clamped at the boundary subjected to gas detonation shock loading are presented. Detonation occurred by mixing Acetylene (C2H2)-Oxygen (O2) in various volume ratio and different initial pressure. The applied impulse is varied to give deformation in the range from 6 mm to 35 mm. Analytical modeling using energy method was also performed. Dependent material properties, as well as strain rate sensitivity, are included in the theoretical modeling. Prediction values for midpoint deflections are compared with experimental data. The analytical predictions have good agreement with experimental values. Moreover, it has been shown that the obtained model has much less error compared with those previously proposed in the literature.

• 한국분무공학회지
• /
• 제26권1호
• /
• pp.26-32
• /
• 2021

In this study, the thickness of the liquid sheet formed by two low speed impinging jets was measured by the direct contact method. The effects of jet velocity and liquid viscosity on the thickness were analyzed and the results were compared with theoretical modeling and optical thickness measurement results. The liquid film thickness decreased as the radius and circumferential angle increased. The jet velocity did not affect the liquid film thickness as predicted in theoretical modeling. In the theoretical modeling, there was no influence of the fluid properties on thickness, but in the case of low viscosity liquids, the thickness was predicted high, and it was well matched in high viscosity liquids. The direct measurement results showed no significant difference from the optical measurement results, thus confirming the reliability of the optical measurement method.