Browse > Article
http://dx.doi.org/10.12989/sem.2015.56.4.535

Effect of gas detonation on response of circular plate-experimental and theoretical  

Babaei, Hashem (Department of Mechanical Engineering, University of Guilan)
Mostofi, Tohid Mirzababaie (Department of Mechanical Engineering, University of Guilan)
Sadraei, Seyed Hamidreza (Department of Mechanical Engineering, University of Guilan)
Publication Information
Structural Engineering and Mechanics / v.56, no.4, 2015 , pp. 535-548 More about this Journal
Abstract
A series of experimental results on thin mild steel plates clamped at the boundary subjected to gas detonation shock loading are presented. Detonation occurred by mixing Acetylene (C2H2)-Oxygen (O2) in various volume ratio and different initial pressure. The applied impulse is varied to give deformation in the range from 6 mm to 35 mm. Analytical modeling using energy method was also performed. Dependent material properties, as well as strain rate sensitivity, are included in the theoretical modeling. Prediction values for midpoint deflections are compared with experimental data. The analytical predictions have good agreement with experimental values. Moreover, it has been shown that the obtained model has much less error compared with those previously proposed in the literature.
Keywords
circular plate; large deformation; gas detonation forming; shock loading; theoretical modeling;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Babaei, H. and Darvizeh, A. (2011), "Investigation into the response of fully clamped circular steel, copper, and aluminum plates subjected to shock loading", Mech. Bas. Des. Struct., 39(4), 507-526.   DOI
2 Babaei, H. and Darvizeh, A. (2012), "Analytical study of plastic deformation of clamped circular plates subjected to impulsive loading", J. Mech. Mater. Struct., 7(4), 309-322.   DOI
3 Babaei, H., Mirzababaie Mostofi, T. and Alitavoli, M. (2015a), "Study on the response of circular thin plate under low velocity impact", Geomech. Eng., 9(2), 207-218.   DOI
4 Babaei, H., Mirzababaie Mostofi, T. and Alitavoli, M. (2015b), "Experimental and theoretical study of large deformation of rectangular plates subjected to water hammer shock loading", Proc. IMechE., PartE: J. Mech. Eng. Sci., DOI: 10.1177/0954408915611055.
5 Batra, R.C. and Dubey, R.N. (1971), "Impulsively loaded circular plates", Int. J. Solids. Struct., 7(8), 965-978.   DOI
6 Bisadi, H. and Meybodi, M.K. (2011), "Experimental, numerical, and theoretical analyses of simultaneous forming-welding of inhomogeneous plates", Proc. IMechE., PartC: J. Mech. Eng. Sci., 225(11), 2552-2564.   DOI
7 Cezary, S. and Bojar, Z. (2008), "Gas detonation spray forming of Fe-Al coatings in the presence of interlayer", Surf. Coat. Tech., 202(15), 3538-3548.   DOI
8 Duffey, T.A. (1967), "The large deflection dynamic response of clamped circular plates subjected to explosive loading", Sandia Laboratory Research Report No. SC-RR-67-532.
9 Gharababaei, H. and Darvizeh, A. (2010), "Experimental and analytical investigation of large deformation of thin circular plates subjected to localized and uniform impulsive loading", Mech. Bas. Des. Struct., 38(2), 171-189.   DOI
10 Ghosh, S.K. and Weber, H. (1976), "Experimental-theoretical corrections of impulsively loaded axisymmetric rigid-plastic membrane", Mech. Res. Commun., 3, 423-428.   DOI
11 Hadavi, V., Ashani, J.Z. and Mozaffari, A. (2012), "Theoretical calculation of the maximum radial deformation of a cylindrical shell under explosive forming by a new energy approach", Proc. IMechE., PartC: J. Mech. Eng. Sci., 226(3), 576-584.   DOI
12 Honda, A. and Suzuki, M. (1999), "Sheet metal forming by using gas imploding detonation", J. Mater. Proc. Tech., 85(1), 198-203.   DOI
13 Hudson, G.E. (1951), "A theory of the dynamic plastic deformation of a thin diaphragm", J. Appl. Phys., 22, 1-11.   DOI
14 Jones, N. (1989), Structural impact, Cambridge University Press, Cambridge.
15 Li, F., Mo, J., Zhou, H. and Fang, Y. (2013), "3D Numerical simulation method of electromagnetic forming for low conductive metals with a driver", Int. J. Adv. Manuf. Tech., 64(9-12), 1575-1585.   DOI
16 Li, L.J. and Jiang, W.K. (2011), "A new effective method to predict the permanent deformation of plane plates subjected to underwater shock loading", Proc. IMechE., PartC: J. Mech. Eng. Sci., 225(5), 1069-1075.   DOI
17 Mynors, D.J. and Zhang, B. (2002), "Applications and capabilities of explosive forming", J. Mater. Proc. Tech., 125, 1-25.
18 Lippman, H. (1974), "Kinetics of the axisymmetric rigid-plastic membrane supplied to initial impact", Int. J. Mech. Sci., 16, 297-303.   DOI
19 Meng, Z., Huang, S., Hu, J., Huang, W. and Xia, Z. (2011), "Effects of process parameters on warm and electromagnetic hybrid forming of magnesium alloy sheets", J. Mater. Proc. Tech., 211(5), 863-867.   DOI
20 Meybodi, M.K. and Bisadi, H. (2009), "Gas detonation forming by a mixture of $H_2+O_2$ detonation", World Acad. Sci. Eng. Tech., 33, 55-58.
21 Nurick, G.N. and Martin, J.B. (1989a), "Deformation of thin plates subjected to impulsive loading-a review (partII)", Int. J. Impact. Eng., 8, 171-186.   DOI   ScienceOn
22 Nurick, G.N. and Martin, J.B. (1989b), "Deformation of thin plates subjected to impulsive loading-a review (partI)", Int. J. Impact. Eng., 8, 159-170.   DOI
23 Perrone, N. and Bhadra, P. (1984), "Simplified large deflection mode solutions for impulsively loaded viscoplastic circular membranes", J. Appl. Mech., 51, 505-509.   DOI
24 Psyk, V., Risch, D., Kinsey, B.L., Tekkaya, A.E. and Kleiner, M. (2011), "Electromagnetic forming-a review", J. Mater. Proc. Tech., 211(5), 787-829.   DOI   ScienceOn
25 Shen, W.Q. and Jones, N. (1993), "Dynamic response and failure of fully clamped circular plates under impulsive loading", Int. J. Impact. Eng., 13(2), 259-278.   DOI
26 Shepherd, J.E. (2009), "Structural response of piping to internal gas detonation", J. Press. Vess-T, ASME, 131(3), 031204.   DOI
27 Wielage, H. and Vollertsen, F. (2011), "Classification of laser shock forming within the field of high speed forming processes", J. Mater. Proc. Tech., 211(5), 953-957.   DOI
28 Skews, B.W., Kosing, O.E. and Hattingh, R.J. (2004), "Use of a liquid shock tube as a device for the study of material deformation under impulsive loading conditions", Proc. IMechE. PartC: J. Mech. Eng. Sci., 218(1), 39-51.   DOI
29 Symonds, P.S. and Wierzbicki, T. (1979), "Membrane mode solution for impulsively loaded circular plates", J. Appl. Mech., 46, 58-64.   DOI
30 Wen, H.M. (1998), "Deformation and tearing of clamped circular work-hardening plates under impulsive loading", Int. J. Pres. Ves. Pip., 75, 67-73.   DOI
31 Yasar, M. (2004), "Gas detonation forming process and modeling for efficient spring-back prediction", J. Mater. Proc. Tech., 150(3), 270-279.   DOI
32 Yasar, M., Demirci, H.I. and Kadi, I. (2006), "Detonation forming of aluminium cylindrical cups experimental and theoretical modelling", Mater. Des., 27(5), 397-404.   DOI