• Journal of Nutrition and Health
• /
• 제16권4호
• /
• pp.233-242
• /
• 1983

This study was attempted to investigate Korean women divers' nutritional status and the effect of their putting on rubber diving suits on the energy balance. For these investigations, measurements of nutrients intake, energy intake and energy consumption during diving work were performed. This study was conducted in summer and winter of 1981. Nutrition survey was carried out by interviewing each individual and the energy consumption during diving work was calculated from the extra oxygen consumption over the resting value and the change in mean body temperature in sea water. The results obtained were summarized as follows : 1) In summer, the divers' dietary intake were 2,454 Kcal for energy, 69g of protein, 16g of fat 578mg of calcium, 11mg of iron, 526 Retinol Equivalent of vitamin A, 1.1mg of thiamin, 1.3mg of riboflavin, 19mg of niacin and 50mg of ascorbic acid. These results showed that the intakes of energy, thiamin, riboflavin, niacin and ascorbic acid were higher than the Korean Recommended Dietary Allowances (RDA). Whereas in winter, the nutrients intake except iron, riboflavin, and vitamin A were higher than the RDA. 2) The energy consumption, measured by oxygen consumption and changes in body heat content, used in diving work were 260 Kcal per day in summer and 370 Kcal per day in winter. These values were about 600-700 Kcal per day lower than 1960s' 1,000 Kcal per day. The divers' energy intake were 2,454 Kcal per day in summer and 2,487 Kcal per day in winter. These data were about 550 Kcal per day lower than 1960s' intake. Since divers have worn the rubber diving suits, the energy consumption decreased as compared with the energy consumed while wearing cotton suits. And this seemed to be resulted in decreasing the energy intake. This result also showed that the balance between energy expenditure and energy intake were kept. 3) The mean subcutaneous fat thickness of divers and nondivers were 8.85 and 9.03 mm respectively. These values were as high as four times as those of 1960s'. The total body fat contents wers 25.8 percent in both diver and nondiver groups and showed an increase as high as twice as compared with 1960s' values.

• Journal of Trauma and Injury
• /
• 제35권3호
• /
• pp.215-218
• /
• 2022

The rectum is the least frequently injured organ in trauma, with an incidence of about 1% to 3% in trauma cases involving civilians. Most rectal injuries are caused by gunshot wounds, blunt force trauma, and stab wounds. A 46-year-old male patient was crushed between two vehicles while he was working. He was hemodynamically unstable, and the Focused Assessment with Sonography for Trauma showed hemoperitoneum and hemoretroperitoneum; therefore, damage control surgery with pelvic packing was performed. A subsequent whole-body computed tomography scan showed a displaced pelvic bone and sacrum fracture. There was evidence of an anorectal full-thickness laceration and urethral laceration. In second-look surgery performed 48 hours later, the pelvis was stabilized with external fixators, and it was decided to proceed with loop sigmoid colostomy. A tractioned rectal probe with an internal balloon was positioned in order to approach the flaps of the rectal wall laceration. On postoperative day 13, a radiological examination with endoluminal contrast injected from the stoma after removal of the balloon was performed and showed no evidence of extraluminal leak. Rectosigmoidoscopy, rectal manometry, anal sphincter electromyography, and trans-stomic transit examinations showed normal findings, indicating that it was appropriate to proceed with the closure of the colostomy. The postoperative course was uneventful. The optimal management for extraperitoneal penetrating rectal injuries continues to evolve. Primary repair with fecal diversion is the mainstay of treatment, and a conservative approach to rectal lacerations with an internal balloon in a rectal probe could provide a possibility for healing with a lower risk of complications.

• Preventive Nutrition and Food Science
• /
• 제3권2호
• /
• pp.186-192
• /
• 1998

This study was conducted to investigate the relationship among prevalence of obesity, nutritional status and factors related to obesity of women who exercise regularly. The subjects of this study were 100 women who have been exercising regularly for more than 6 months. They were mostly housewives ages 24 to 63 years and had graduated middle or high school. Their average income was form 700 to 1,500 thousand won per month and most of them had 2 r 3 children. They sleep usually 6~8 hours a day. Most of physical indices of obesity were increased progressively with age. Among them , weight (61.5$\pm$1.4kg), subscapular (16.3$\pm$1.4mm) and abdomen(31.4$\pm$1.2mm) skinfold thickness were higher in 50 years than in others. BMI after exericse was decreased compared with BMI before exericise. WHR was 0.82 in 40 years and 0.85$\pm$0.01 in 50- to 60- year-old group. The percentage of body fat increased with advancing years and the highest values were shown in 50 - to 60-year old group (skyndex value : 38.6$\pm$0.6, BIA value : 28.7$\pm$0.8<0.05). The prevalence of obesity was measured by bioelectrical impedance fatness analyzer (BIA), obdy mass index (BMI) and skinfold thickness were 17.0%, 24.0% and 78.0% respectively. Most subjects were in good nutritional status, but in the subjects aged 24~49, energy (89.3%), iron (93.3%) and vit. A (97.4%) intake were slighltyl lower than the RDA. Energy intake was slightly insufficient tot he 50-63year old subjects (88.6%) compared with RDA. It seemed that they restricted calorie intake for the weight control. The energy percentage of carbohydrate, fat and protein was 65 : 20 : 15, the result of which came closed to the recommended calorei composition. There were positive correlations between obesity and other variable such as age. number of childeren and physical indics.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권3호
• /
• pp.340-350
• /
• 2007

The objective of this study was to determine whether peroxisome proliferator-activated receptor ${\gamma}$(PPAR${\gamma}$ is involved in the regulation of weaning to estrus of primiparous sows. Twelve sows composed of 6 groups of 2 full-sibs in a similar age (325.2 d), body weight (BW; 152.4 kg) and backfat thickness (BFT; 27.0 mm) at start of lactation, were allocated to accept 31 MJ (restricted group, R-group) or 53 MJ (control group, C-group) DE/d treatment, respectively. The experimental results indicated that the low energy intake resulted in excessive losses of BW and BFT during lactation in R-group sows, which may be related to decrease of serum 15-deoxy-${\Delta}^{12,14}$-prostaglandin $J_2$ (15d-$PGJ_2$), a ligand of PPAR${\gamma}$ The obvious peak and the frequency of LH, FSH and estradiol ($E_2$) were only observed in C-group sows. Except for $E_2$ at d 1 and 2, serum FSH, LH and $E_2$ concentrations in R-group were lower than those in C-group sows after weaning. However, the serum progesterone ($P_4$) level in R-group sows was always more than that in C-group. The expression abundances of PPAR${\gamma}$and GnRH receptor (GnRH-R) in pituitary, FSH receptor (FSH-R), LH receptor (LH-R), estrogen receptor (ES-R) and aromatase in ovary of anestrous sows were lower than those of estrous sows. Neither the BFT nor the BW was associated with the mRNA abundance of PPAR${\gamma}$in hypothalamus during lactation. Expressions of PPAR${\gamma}$in pituitary and ovary were affected evidently by the BFT changes and only by the loss of BW of sows during and after lactation. Furthermore, PPAR${\gamma}$mRNA level in ovary was significantly related to the expression abundances of GnRH-R, FSH-R, ES-R and aromatase, and GnRH-R was obviously associated with PPAR${\gamma}$expression in pituitary. However, PPAR${\gamma}$expression in hypothalamus likely has no effects on these genes expression and no obvious difference for all sows. Not serum $E_2$ or $P_4$ alone but the ratios of $E_2$ to $P_4$ and 15d-$PGJ_2$ to $P_4$, and serum FSH and LH were evidently related to PPAR${\gamma}$expression in pituitary and ovary. It is concluded that PPAR${\gamma}$is associated with body conditions, reproduction hormones and their receptor expression, which affected the functions of pituitary and ovary and ultimately the estrus after weaning of primiparous sows.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권10호
• /
• pp.1391-1394
• /
• 2002

The polymorphism of insulin-like growth factor-I (IGF-I) in 13 pig breeds (total n=559) was detected by PCR-Hha I- RFLP, and allele A (151 bp and 28 bp) or allele B (116 bp, 35 bp and 28 bp) were observed. In these pig breeds, it was found that European pig breeds carried high frequencies of allele B, while Chinese native pig breeds carried high frequencies of allele A. Meanwhile the role of porcine IGF-I was investigated in 117 Nanchang White pigs and 360 Large Yorkshire pigs. Eight traits about growth and carcass were recorded for analyzing the associations between IGF-I gene polymorphism and performance quantitative traits. In the Nanchang White pigs, those with AA genotype generally had higher birth weight than those with AB genotype (p<0.05), but all these genotypes had no significant effect on the other traits which had been analyzed. In Large Yorkshire pigs, those with BB genotype had higher 2 months and 6 months body weight than those with AA genotype (p<0.05), and had a thicker hind-back-fat thickness and mid-back-thickness than those with AB and BB genotypes (p<0.05). And those with BB genotype were the thinnest in Large Yorkshire. Furthermore, pigs with AA genotype had a lower lean percentage than those with AB and BB genotypes (p<0.01), and the lean percentage of those with BB genotype was the highest. Based on these results, it is possible to make the IGF-I gene locus into the application of marker-assisted selection programmes.

• International Journal of Automotive Technology
• /
• 제7권4호
• /
• pp.485-492
• /
• 2006

The AA5182/polypropylene/AA5182(AA/PP/AA) sandwich sheets have been developed for application to automotive body panels in future lightweight vehicles with significant weight reduction. It has been reported that the AA5182 aluminum sheet shows $L\"{u}ders$ band because of dissolved Mg atoms that cause fabrication process problem, especially surface roughness. The examination of serration behavior has been made after the tensile deformation of the AA/PP/AA sandwich sheets as well as that of the AA5182 aluminum skins at room and elevated temperatures. All sandwich sheets and the AA5182 aluminum skin showed serration behavior on their flow curves. However, the magnitude of serration was significantly diminished in the sandwich sheet with high volume fraction of the polypropylene core. According to the results of the analysis of the surface roughness following the tensile test, $L\"{u}ders$ band depth of the sandwich sheet evidently showed lower than that of the AA5182 aluminum skin. The strain rate sensitivity, m-value, of the AA5182 aluminum skin was -0.006. By attaching these skins to the polypropylene core, which has relatively large positive value of 0.050, m-value of the sandwich sheets changed to the positive value. The serration mechanism of the sandwich sheets was quantitatively investigated in the point of the effect on polypropylene thickness variation, that on the strain rate sensitivity and that on the localized stress state.

• Computers and Concrete
• /
• 제14권1호
• /
• pp.91-107
• /
• 2014

Using the principle of damage mechanics, zero-thickness pore pressure cohesive elements (PPCE) are used to simulate the casing-cement interface (CCI) and cement-rock interface (CRI). The traction-separation law describes the emergence and propagation of the PPCE. Mohr-coulomb criteria determines the elastic and plastic condition of cement sheath and rock. The finite element model (FEM) of delamination fractures emergence and propagation along the casing-cement-rock (CCR) interfaces during hydraulic fracturing is established, and the emergence and propagation of fractures along the wellbore axial and circumferential direction are simulated. Regadless of the perforation angle (the angle between the perforation and the max. horizontal principle stress), mirco-annulus will be produced alonge the wellbore circumferential direction when the cementation strength of the CCI and the CRI is less than the rock tensile strength; the delamination fractures are hard to propagate along the horizontal wellbore axial direction; emergence and propagation of delamination fractures are most likely produced on the shallow formation when the in-situ stresses are lower; the failure mode of cement sheath in the deep well is mainly interfaces seperation and body damange caused by cement expansion and contraction, or pressure testing and well shut-in operations.

• 한국의류산업학회지
• /
• 제23권5호
• /
• pp.645-654
• /
• 2021

This study aimed to visually compare the implementation of digital virtual fabrics for stretch fabrics mainly used in clothing that closely touch the body, using CLO. A digital fabric was used in CLO after measuring the weight, thickness, bending, and tensile force of five adhering clothing fabrics using a CLO fabric kit. The visual similarity of draftability was compared by measuring the area of the bending angle and the shape of the wrinkles of the real and digital fabric. A comparison of the bending angles showed that Fabric A was -0.75° and Fabric D was -2.5°, showing slightly lower drape properties than the real fabric. Meanwhile, Fabric B was 2.75°, Fabric C was 2.13°, and Fabric E was 1.375°, showing slightly higher drape properties in the vertical direction than the real fabric. Comparing the widths of the drape shapes, Fabric A was 0.77%, Fabric B was 1.27%, Fabric C was 0.06%, and Fabric E was 1.48%, which showed a slight difference. Fabric D showed a difference of 3.17% and was implemented where the digital fabric spread a little wider. As a result, the stretch fabric was visually expressed similarly to the real fabric as a whole in CLO. For 3D virtual clothing technology to be used widely in the close clothing industry in the future, more research on real clothing is needed.

• Corrosion Science and Technology
• /
• 제9권3호
• /
• pp.109-115
• /
• 2010

Interstitial-free (IF) steels are widely used for car body material. However, a few types of streaky mark defect are commonly found on hot dip galvannealed (GA) IF steel sheets. In the present study, both the phase structure of a streaky mark defect and the microstructure of the substrate just below it were characterized by optical microscopy (OM) and scanning electron microscopy (SEM). It was found that the bright streaky mark area was composed of ${\delta}$ phase while the dark normal area was full of craters. More than half of the grains at the uppermost surface of the substrate just below the streaky mark defect are unrecrystallized grains which could result from lower finish rolling temperature during hot rolling and be kept stable during the annealing process, while almost all the grains in the normal area are equiaxed grains. In order to confirm the effect of the unrecrystallized grains on the coating morphology, hot dip galvannealing simulation experiments were carried out in IWATANI HDPS. It is proved that the unrecrystallized grains accelerate the Fe-Zn reaction rate during galvannealing and result in a flatter coating surface and an even coating thickness. Finally, a formation mechanism of the streaky mark defect on the hot dip galvannealed IF steel sheet was discussed.

• 한국자동차공학회논문집
• /
• 제23권1호
• /
• pp.105-111
• /
• 2015

Since 2007, Insurance Institute of Highway Safety(IIHS) has conducted the new bumper test using bumper barrier to estimate the repair cost of impacted vehicle. In this study, for the front body FE model of a medium size passenger car analyzes were carried out to optimize the shape of backbeam center reinforcement bracket. First, overlap effect was examined with changing the overlap magnitude and spot welds were added along the backbeam center line for reducing the section shear deformation. Next, for an overlap model design parameter study was performed for the bracket. Thickness effect was examined and an inner reinforcement was added to the bracket. Also, the lower part of bracket was deleted and additionally the bracket length was extended. The results were discussed in terms of backbeam backward deflection, barrier backstop intrusion and weight. Compared with the current design, the final model showed 44.1% bracket weight reduction with 30.0% decrease of backbeam deflection.