Cementing failure of the casing-cement-rock interfaces during hydraulic fracturing |
Zhu, Hai Y.
(State Key Laboratory of Oil & Gas Reservoir Geology and Exploitation, Southwest Petroleum University)
Deng, Jin G. (State Key Laboratory of Petroleum Resource and Prospecting (China University of Petroleum)) Zhao, Jun (Oilfield Chemicals R & D Institute, COSL) Zhao, Hu (Oilfield Chemicals R & D Institute, COSL) Liu, Hai L. (State Key Laboratory of Petroleum Resource and Prospecting (China University of Petroleum)) Wang, Teng (State Key Laboratory of Oil & Gas Reservoir Geology and Exploitation, Southwest Petroleum University) |
1 | Zhu, X.H., Liu, S.H. and Tong, H. (2013a), "Plastic limit analysis of defective casing for thermal recovery wells", Eng. Fail. Anal., 27, 340-349. DOI |
2 | Zhu, X.H., Tang, L.P. and Tong, H. (2013b), "Effects of high-frequency torsional impacts on rock drilling", Rock Mech. Rock Eng., DOI: 10.1007/s00603-013-0461-0. DOI |
3 | Rodriguez, W.J., Fleckenstein, W.W. and Eustes, A.W. (2003), "Simulation of collapsed load on cemented casing using finite element analysis", SPE Annual Technical Conference, Denver, Colorado. |
4 | Seidel, F.A. and Greene, T.G. (1985), "Use of expanding cment improves bonding and aids in eliminating annular gas migration in hobbs grayburg-san andres wells", SPE Annual Technical Conference and Exhibition, Las Vegas, Nevada, September. |
5 | Taleghani, A.D. (2009), "Analysis of hydraulic fracture propagation in fractured reservoirs: an improved model for the interaction between induced and natural fractures", Ph. D Dissertation, The University of Texas at Austin. |
6 | Tang, C.A., Tham, L. G., Lee, P.K.K., Yanga, T.H. and Lia, L.C. (2002), "Coupling analysis of flow, stress and damage (FSD) in rock failure", Int. J. Rock Mech. Mining Sci., 39(4), 477-489. DOI ScienceOn |
7 | Thiercelin, M., Baumgarte, C. and Guillot, D. (1998) "A Soil Mechanics Approach To Predict Cement Sheath Behavior", SPE/ISRM Rock Mechanics in Petroleum Engineering Conference, Trondheim, Norway, July. |
8 | Turon, A., Camanho, P.P., Costa, J. and Davila, C.G. (2006), "A damage model for the simulation of delamination in advanced composites under variable-model loading", Mech. Mater., 38 (11), 1072-1089. DOI ScienceOn |
9 | Urraca, M. and Balazs, I. (2009), "Targeting Zonal Isolation Challenges on the Strategic Szoreg UGS Project, Hungary", SPE/IADC Middle East Drilling Technology Conference & Exhibition, Manama, Bahrain, October. |
10 | Wang, W. and Dahi, T. A. (2012), "Emergence and Propagation of Delamination Fractures along the Casing-Cement Interface", 46th US Rock Mechanics / Geomechanics Symposium, Chicago, IL, USA, June. |
11 | Yao, Y., Gosavi, S.V., Searles, K.H. and Ellison, T.K. (2010), "Cohesive Fracture Mechanics Based Analysis to Model Ductile Rock Fracture", 44th US Rock Mechanics Symposium and 5th U.S.-Canada Rock Mechanics Symposium, Salt Lake City, UT, June. |
12 | Gordeliy, E. and Peirce, A. (2013), "Coupling schemes for modeling hydraulic fracture propagation using the XFEM", Comput. Method. Appl. Mech. Eng., 253, 305-322. DOI |
13 | Gray, K.E., Podnos, E. and Becker, E. (2009), "Finite-element studies of near-wellbore region during cementing operations: Part I", SPE Drilling Completion, March, 127-136. |
14 | Hossain, M.M. and Rahman, M.K. (2008), "Numerical simulation of complex fracture growth during tight reservoir stimulation by hydraulic fracturing", J. Petrol. Sci. Eng., 60, 86-104. DOI ScienceOn |
15 | Jin, X., Shah, S.N. and Sheng, M. (2012), "Hydraulic fracturing model based on nonlinear fracture mechanics: theory and simulation", SPE Annual Technical Conference and Exhibition, San Antonio, Texas, USA. |
16 | Jin, X. and Shah, S.N. (2013), "Fracture propagation direction and its application in hydraulic fracturing", SPE Hydraulic Fracturing Technology Conference, The Woodlands, TX, USA. |
17 | Nagel, N.B. and Sanchez-Nagel, M. (2011), "Stress shadowing and microseismic events: A numerical evaluation", SPE Annual Technical Conference and Exhibition, Denver, Colorado, USA. |
18 | Zhang, G.M., Liu, H., Zhang, J., Wu, H.A. and Wang, X.X. (2010), "Three-dimensional finite element simulation and parametric study for horizontal well hydraulic fracture", J. Petrol. Sci. Eng., 72, 310-317. DOI ScienceOn |
19 | Fleckenstein, W.W., Eustes, AW. and Miller, M.G. (2000), "Burst induced stresses in cemented well bores", SPE/AAPG Western Regional Meeting, Long Beach, California. |
20 | Goodwin, K.J. and Crook, R.J. (1992), "Cement sheath stress failure", SPE Drilling Engineering, December, 291-296. |
21 | Zhang, X., Jeffrey, R.G. and Thiercelin, M. (2009), "Mechanics of fluid-driven fracture growth in naturally fractured reservoirs with simple network geometries", J. Geophys. Res., 114, 402-406. |
22 | Zhu, H.Y., Deng, J.G., Chen, Z.J., An, F.C., Liu, S.J., Peng, C.Y., Wen, M. and Dong, G. (2013), "Perforation optimization of hydraulic fracturing of oil and gas well", Geomech. Eng., 5(5), 463-483. DOI |
23 | Zhu, H., Deng, J., Xie, Y., Huang, K., Zhao, J. and Yu, B. (2012), "Rock mechanics characteristic of complex formation and faster drilling techniques in Western South China Sea oilfields", Ocean Eng., 39(44), 33-45. |
24 | Ravi, K., Bosma, M. and Gastebled, O. (2002b), "Improve the economics of oil and gas wells by reducing the risk of cement failure", IADC/SPE Drilling Conference, Dallas, February. |
25 | Nagel, N.B., Sanchez-Nagel, M. and Lee, B. (2012), "Gas shale hydraulic fracturing: A numerical evaluation of the effect of geomechanical parameters", SPE Hydraulic Fracturing Technology Conference, The Woodlands, Texas, USA. |
26 | Rahman, M.M., Hossain, M.M., Crosby, D.G., Rahman, M.K. and Rahman, S.S. (2002), "Analytical, numerical and experimental investigations of transverse fracture propagation from horizontal wells", J. Petrol. Sci. Eng., 35(3-4), 127-150. DOI ScienceOn |
27 | Ravi, K., Bosma, M. and Gastebled, O. (2002a). "Safe and economic gas wells through cement design for life of the well", SPE Gas Technology Symposium, Calgary, May. |
28 | Camanho, P.P. and Davila, C.G. (2002), "Mixed-mode decohesion finite elements for the simulation of delamination in composite materials", NASA/TM-2002-211737, 1-42. |
29 | Chen, Z.R. (2013), "An ABAQUS implementation of the XFEM for hydraulic fracture problems", In: "Effective and Sustainable Hydraulic Fracturing", Eited by Bunger, A.P., McLennan, J. and Jeffrey, R., Publisher: InTech, May 17, 725-739. |
30 | Chen, Z., Bunger, A.P., Zhang, X. and Jeffrey, R.G. (2009), "Cohesive zone finite element-based modeling of hydraulic fractures", Acta Mech. Solida Sin., 22(05), 443-452. DOI ScienceOn |
31 | Dusseault, M.B., Gray, M.N. and Nawrocki, P.A. (2000), "Why oilwells leak: cement behavior and long-term consequences", SPE International Oil and Gas Conference and Exhibition, Beijing, China. |
32 | Economides, M.J. and Nolte, K. (1991), Reservoir Stimulation, second edition. Englewood Cliffs, New Jersey: Prentice-Hall, Inc. |
33 | Xue, B., Wu, H.A., Wang, X.X., Lian, Z.L., Zhang, J. and Zhang, S.C. (2006), "A three-dimensional finite element model of hydraulic progressive damage", Key Eng. Mater. 324-325, 375-378. DOI |
34 | Pattillo, P.D. and Kristiansen, T.G. (2002), "Analysis of horizontal casing integrity in the valhall field", SPE/ISRM Rock Mechanics Conference, Irving, Texas, USA. |