• Title/Summary/Keyword: the standard body measurement

검색결과 268건 처리시간 0.025초

Automatic RF Input Power Level Control Methodology for SAR Measurement Validation

  • Kim, Ki-Hwea;Choi, Dong-Geun;Gimm, Yoon-Myoung
    • Journal of electromagnetic engineering and science
    • /
    • 제15권3호
    • /
    • pp.181-184
    • /
    • 2015
  • Evaluation of radiating radiofrequency fields from hand-held and body-mounted wireless communication devices to human bodies are conducted by measuring the specific absorption rate (SAR). The uncertainty of system validation and probe calibration in SAR measurement depend on the variation of RF power used for the validation and calibration. RF input power for system validation or probe calibration is controlled manually during the test process of the existing systems in the laboratories. Consequently, a long time is required to reach the stable power needed for testing that will cause less uncertainty. The standard uncertainty due to this power drift is typically 2.89%, which can be obtained by applying IEC 62209 in a normal operating condition. The principle of the Automatic Input Power Level Control System (AIPLC), which controls the equipment by a program that maintains a stable input power level, is suggested in this paper. The power drift is reduced to less than ${\pm}1.16dB$ by AIPLC, which reduces the standard uncertainty of power drift to 0.67%.

부분골밀도 측정을 통해 산출되는 체지방률의 임상적 유용성에 대한 평가 (The Clinical Usefulness Measurement of the Whole Body Percent Fat Calculated by the Part Bone Mineral Density Measurement)

  • 강영은;김은혜;김호성;최종숙;최우준
    • 핵의학기술
    • /
    • 제15권1호
    • /
    • pp.3-9
    • /
    • 2011
  • 이중에너지 방사선 흡수계측법(Dual-energy X-ray Apsorptiometry, DXA)은 일반적으로 골밀도를 통한 골다공증 평가 및 치료목적으로 이용되어 왔으며 최근 비만에 대한 관심이 높아지면서 체지방검사 처방이 증가하고 있는 추세이다. 기존의 체지방 측정은 전신을 검사해야만 평가가 가능했지만 근래 DXA장비의 소프트웨어가 향상 되면서 요추와 대퇴부의 측정만으로도 전신체지방률을 추측 할 수 있게 되었다. 전신측정이 아닌 부분측정 값이 다른 검사방법으로 산출된 값과 비교하여 타당성을 갖는지 생체전기저항측정법(Bioelectrical Impedence Analysis, BIA)과 체질량 지수(Body Mass Index, BMI)와의 상관도 분석을 통해 알아보고자 한다. 2010년 3월부터 8월까지 본원 건강검진센터에 내원한 수검자 중 40세 이상의 여성 90명을 대상으로 DXA와 BIA를 통해 체지방률을 측정하였다. BMI는 신체 계측기를 통해 측정된 신장과 체중을 수검자 정보에 기입하여 자동으로 산출되는 값을 활용하였다. 또한 체중에 따른 차이가 있는지 알아보기 위해 BMI를 기준으로 저체중, 정상, 비만의 세 그룹으로 분류하여 각 그룹에서 BMI와 BIA, DXA 간의 상관도를 분석하였다. 저체중과 정상, 비만으로 나눈 세 그룹에서의 DXA와 BIA의 비교는 모든 그룹에서 통계적으로 유의한 차이를 보이지 않았다. 그룹으로 나누지 않은 상태에서의 상관분석결과 DXA로 측정된 체지방률은 BMI와 비교해 통계적으로 유의한 높은 상관관계를 나타냈으며(r=0.908, p<0.01) BIA와의 비교에서도 통계적으로 유의한 높은 상관관계를 보였다(r=0.927, p<0.01). 부분 골밀도 측정으로부터 추정된 전신체지방률이 BIA 그리고 BMI와 비교해 뛰어난 상관관계를 보여 정보의 신뢰도가 높다는 것을 확인하였다. 아직 추정된 전신체지방률에 관한 명확한 기준이 없어 골밀도측정만으로 체지방평가를 하기는 어렵다. 그러나 골밀도검사를 통해 골다공증의 진단은 물론 체지방에 관한 정보까지 얻을 수 있다는 점에서 매우 효율적이며 추후 전신골밀도검사로 측정된 체지방률과의 비교연구를 통해 더 객관적이고 임상적으로 유용한 정보 제공이 가능할 것으로 판단된다.

  • PDF

한국인의 표준체중치와 정상적응체중치에 관한 연구 (Studies on the Physical Growth and Development, Standard Body Weight and Normal Adapted Body Weight in Korea)

  • 김대봉;윤태영;최중명;박순영
    • 보건교육건강증진학회지
    • /
    • 제13권1호
    • /
    • pp.128-162
    • /
    • 1996
  • Using Random Sampling, the authors measured the body heights and weights of 31,151 persons - 17,102 in males and 14,049 in females from metropolitan, urban and rural areas between 6 to over 80 year old - for the purpose of investigating the type and the actual condition of the Korean's growth and development. At first, on the basis of the results, the authors measured the growth and development, various kinds of physiques, nutritional index of the 6 to 20s age group. Second, the authors presented the standard body weight of males and females by their body height, who were in the end of their growth (20-29 age group). Third, the authors calculated and presented the normal adapted body weight of the age group who were over 30 age after the growth had been completed. Forth, the author presented the obesity rate of the adults over 20 years old by body mass index. Finally, the authors compared chronological change of the Koreans' body heights and body weights with the results of other researchers. 1. Body Measurement Rapid growth, in terms of body height, which is described by a straight line on a growth curve has been observed among males in the ages 6-13 and among females 6-14. That growth curve turned out to be slower among the people of higher ages by both sexes. The cross-over occurred in both sexes at 11-14. The highest growth rate for a year is at 13-16 for males and 11-13 for females. This indicates that females enter a rapidly growing stage 2 years earlier than males. 2. Various Physiques and Nutritional Index Rapid growth, in terms of Relative Body Weight Index, which is described by a straight line, has been observed among males in the ages 6-16 and females in the ages 6-14. The cross-over occurred in both sexes 12.5-14.5 age in the adolescencent period. Whereupon females outgrow males. The Roher Index displayed more good value in case of females than male and in the adolescent period, the level of fullness is lower than after the completion of development. The Kaup Indices of both sexes increase with age. The index is less than 2.0 for males in 6-14 age group and for females in 6-13 age group and with this, it appeared that development of horizontal axis to long axis is poor. The index is more than 2.0 after 15 age group in males and 14 age group in females and developmental state4 age group and for females in 6-13 age group and with this, it appeared that development of horizontal axis to long axis is poor. The index is more than 2.0 after 15 age group in males and 14 age group in females and developmental state Body Mass Index is less than 20 for males 6-14 age group and for females in 6-13 age group. In the case of the higher age group, that index maintains a normal state.

  • PDF

패턴메이킹을 위한 남성(男性) 인대개발(開發)에 관(關)한 연구(硏究) (The Development of Men's Dress Form for Pattern Making)

  • 유현;심부자
    • 패션비즈니스
    • /
    • 제10권5호
    • /
    • pp.159-179
    • /
    • 2006
  • This research checked about the necessity for the development of men's dress forms in the first investigation for the educational circle and the men's wear industry. Somatotype characteristics were analyzed in the second investigation of body measurement with the subjects of 200 male adults in their twenties residing in Busan. The following are the results of the present research to develop male dress forms for patternmaking: 1. In the group analysis for the characterization of front body types, three somatotypes were found and named H, Semi X, and Y. In the cluster analysis of side body types, four types were identified: D, I, d, and q. In the combination of front and lateral body types, four kinds were chosen: semi X-I, semi X-q, semi Y-I, and Y-q. 2. Through the comparison of plane figures by the plaster method as well as horizontal and vertical cross sections by the sliding gauge method, semi X-I was finally chosen as the standard somatotype for male dress form development. 3. Compared with the sliding gauge method of the present dress forms, the research dress form reflected better the shapes of the parts of the back and hips and the position of the waist, especially for males in their 20's. In addition, the dress form in the current research had superior points in all the items of clothing evaluation. Based on the above results, the sizes and models of the men's dress forms for patternmaking were developed.

비만체형을 위한 기본 Bodice 원형연구 -중년기 부인을 중심으로- (A Study on the Basic Bodice Pattern for the Fatty Body -The subject of middle-aged women-)

  • 한애미
    • 대한가정학회지
    • /
    • 제25권3호
    • /
    • pp.15-26
    • /
    • 1987
  • The purpose of this study was to develop the pattern drafting method which would be suitable to their physical characteristics for the fatty body of 40∼55 aged Korean women who are more than 1.5 Rohrer's Index and 90㎝ bust girth. The study was composed as follows; 1. Body measurement and statistical analysis: One hundred and thirty women were measured on 29 items. Thirty-four items including 29 measured items and 5 calcutated items were analyzed statistically. 1) Mean, standard deviation, variance, maximum, minimum, range were computed. 2) Correlation coefficients between each items were computed. 2. Development of new bodice pattern drafting method: Measurement items necessary to draft new bodice pattern were bust girth, center back waist length, shoulder width, back width, chest and neck base girth. The new pattern was examined through three wearing tests for completion. 3. Evaluation of the new pattern drafting method: The new pattern was objectively evaluated by the sensory test. The sensory evaluation was applied to evaluate the new pattern for the fatty body women by comparint it with the conventional patterns. The results of sensory tests of the new pattern are as follows: 1) The composite reliability coefficient is 0.7698, and the reliability of sensory test shows high. 2) According to a statistical analysis of the result of the 23 items on the questionaire, all the items showed significant differences(α 0.01) between the two, with the new pattern having higher scores. The new pattern is better conventional pattern as the average mark of the former is 3.901 but that of latter is 2.926. The new pattern drafting method proved to be superior to the conventional one especially in the fitness at the center front neck point, shoulder point, side line, armscye depth, position of bust point, chest width line, under arm dart and the shoulder line.

  • PDF

Comparison of Avatar Posture Formation According to 3D Virtual Garment Modeling Programs -Focusing on Cycling Movements of High-School Male Cyclist-

  • Park, Hyunjeong;Do, Wolhee
    • 한국의류학회지
    • /
    • 제45권6호
    • /
    • pp.965-977
    • /
    • 2021
  • The study aimed to analyze the functional differences in 3D virtual garment programs and compare body scan data with the corresponding 3D virtual models. We selected 3D virtual garment programs, formed virtual models in a representative size for high-school male cyclists, and analyzed them using the Design-X program. The results were as follows. In the 3D virtual garment programs, the anthropometric items for virtual model forming differed significantly from the standard anthropometric items suggested by Size Korea. Comparing the lower body scan data and virtual models formed by the 3D virtual garment programs, the biggest difference was in the shapes of the waist and hips, i.e., the flatness values of the waist and hips were different for each program in the cross-section view. In the lower body, a data-input-based program was needed for changing the exact measurement position of the waist circumference and hips' shape in detail. If a 3D virtual garment program provides functions for the virtual model's joint angle input and free motion transformation, it is expected to be widely used in the sportswear industry.

Development and validation of prediction equations for the assessment of muscle or fat mass using anthropometric measurements, serum creatinine level, and lifestyle factors among Korean adults

  • Lee, Gyeongsil;Chang, Jooyoung;Hwang, Seung-sik;Son, Joung Sik;Park, Sang Min
    • Nutrition Research and Practice
    • /
    • 제15권1호
    • /
    • pp.95-105
    • /
    • 2021
  • BACKGROUND/OBJECTIVES: The measurement of body composition, including muscle and fat mass, remains challenging in large epidemiological studies due to time constraint and cost when using accurate modalities. Therefore, this study aimed to develop and validate prediction equations according to sex to measure lean body mass (LBM), appendicular skeletal muscle mass (ASM), and body fat mass (BFM) using anthropometric measurement, serum creatinine level, and lifestyle factors as independent variables and dual-energy X-ray absorptiometry as the reference method. SUBJECTS/METHODS: A sample of the Korean general adult population (men: 7,599; women: 10,009) from the Korean National Health and Nutrition Examination Survey 2008-2011 was included in this study. The participants were divided into the derivation and validation groups via a random number generator (with a ratio of 70:30). The prediction equations were developed using a series of multivariable linear regressions and validated using the Bland-Altman plot and intraclass correlation coefficient (ICC). RESULTS: The initial and practical equations that included age, height, weight, and waist circumference had a different predictive ability for LBM (men: R2 = 0.85, standard error of estimate [SEE] = 2.7 kg; women: R2 = 0.78, SEE = 2.2 kg), ASM (men: R2 = 0.81, SEE = 1.6 kg; women: R2 = 0.71, SEE = 1.2 kg), and BFM (men: R2 = 0.74, SEE = 2.7 kg; women: R2 = 0.83, SEE = 2.2 kg) according to sex. Compared with the first prediction equation, the addition of other factors, including serum creatinine level, physical activity, smoking status, and alcohol use, resulted in an R2 that is higher by 0.01 and SEE that is lower by 0.1. CONCLUSIONS: All equations had low bias, moderate agreement based on the Bland-Altman plot, and high ICC, and this result showed that these equations can be further applied to other epidemiologic studies.

타액 코티졸 측정을 위한 타액 수집 방법 조사 (Method of Saliva Collection for Salivary Cortisol Measurement)

  • 최산호;이일석;송인자;권오종;박기언;홍해진;성강경;이상관
    • 동의생리병리학회지
    • /
    • 제28권2호
    • /
    • pp.223-232
    • /
    • 2014
  • Most of salivary cortisol are an unbound free form reflecting physiological function later. Thus, it is used frequently to evaluate the HPA-Axis and physiological function. Although the needs of salivary cortisol measurement in Korean Medicine is higher and higher, there are not many studies, because the reliability of salivary cortisol measurement is not high. To make the reliability high and encourage to use it in Korean Medicine, the goal of this study is to suggest the standard method of saliva collecting for cortisol measurement through the review of previous studies using salivary cortisol and to encourage to use it in clinical fields in Korean Medicine. The results are as followed; First, salivary cortisol has many benefits, i. e. easy collecting, non-invasive collecting, and reflecting the physiological function. Second, the collecting time and method are kept sternly, because the methods of saliva collecting vary depending on the goal of study. Third, the specific tools for saliva collecting are recommended to prevent contamination. In conclusion, if the standard methods of saliva collecting is kept to measure salivary cortisol, it would be very useful in many fields of Korean Medicine.

중국수출(中國輸出) 기성복(旣成服)의 치수에 관한 연구(硏究)-KS규격(規格)을 중심(中心)으로 한 중국((中國) 여성복 (女性服)및 남성복(男性服)의 대응(對應)치수- (A Study on The Sizes of Ready-made Clothes to Export to China - Corresponding Sizes of China Women's and Men's Ready-made Clothes Sizes Based on KS size specification-)

  • 심부자
    • 패션비즈니스
    • /
    • 제11권4호
    • /
    • pp.152-172
    • /
    • 2007
  • This research suggest the correspondent sizes of women's and men's ready-made clothes to export to China on the basis of KS size specification. The results of this study, with the cooperation of Sejung and Searte Companies exporting clothes to Ningbo City, Zhejiang Province in China, are as follows: 1. Corresponding Dimensions of China Women's Clothes According to Morrison's relative deviation method, the body measurement characteristics of Chines and Korean women in their 30s and 40s were compared. As a result, Chinese women were bigger in height, arm length, abdomen girth, and upper arm girth but smaller in shoulder length and shoulder width. The cluster analysis for body type classification was as follows: Type 1, tall and well-developed, was 34.8%. Type 2 with weaker upper body, medium height, narrow shoulders and a slim waist was 45%. Type 3 with stronger upper body, shortest height and wide shoulders was 20.2%. 2. Corresponding Dimensions of China Men's Clothes Based on the drop standard of KS K 0050, the body types of Chinese men in their 20s were classified. A body types were 55.77%, Y body types were 32.16%, B body types were 11.55% and BB body types were 1.51%. According to the criteria of ready-made dimensions of normal body type suggested in Korea Standards, and in consideration of the basic distribution reality of body dimensions, representative 5 sizes were selected. 3. The corresponding size specification of China women's and men's clothes based on those of KS size specification were presented here, showing product sizes and physical items in detail.

유아복의 원형활용방안에 관한 연구 I (A Study of the Use of the Patterns of Children's Clothes)

  • 박정순
    • 대한가정학회지
    • /
    • 제30권1호
    • /
    • pp.67-86
    • /
    • 1992
  • The author distributed the questionaires which ask the idea of the purchase of children's clothes in order to help the emotinal development of children and to raise demostic economy. 89% of those who answered realized the necessity of home sewing. Because of the lack of sewing ability(66%), the author made comparatively easy patterns such as blouses for summer, skirts, short pants and one-piece dresses. To populrize these patterns, the aother used the measurements of body-measurement which were made by Korea Institute of Standard. The author studied the patterns and choice of patterns according to growing body. The author tested the clothes worn and visual evaluation for fitness of the patterns. The results are as follows: First; The author developed basic pattern 1 and 2 and applied to design A, B and C. Second: For every design, the author made patterns fit to the children. Third: According to age, the author curtailed or enlarged patterns. Lastly: The author tried to reduce living expenses through making children's clothes using the sewing machine and supress over-consumption and lead the people toward normal economic life.

  • PDF