• Journal of Communications and Networks
• /
• v.10 no.2
• /
• pp.118-126
• /
• 2008

The use of beamforming is effective for users in limited power environments. However, when it is applied to the downlink of a cellular system with universal frequency reuse, users near the sector boundary may experience significant interference from more than one sector. The use of a minimum mean square error (MMSE)-type receiver may not sufficiently cancel out the interference unless a sufficient number of receive antennas are used. In this paper, we consider the use of inter-sector beamforming that cooperates with a neighboring sector in the same cell to mitigate this interference problem in time-division duplex (TDD) environments. The proposed scheme can avoid interference from an adjacent sector in the same cell, while enhancing the transmit array gain by using the TDD reciprocity. The performance of the proposed scheme is analyzed in terms of the output signal-to-interference-plus-noise power ratio (SINR) and the output capacity when applied to an MMSE-type receiver. The beamforming mode can be analytically switched between the inter-sector and the single-sector mode based on the long-term channel information. Finally, the effectiveness of the proposed scheme is verified by computer simulation.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1992.06a
• /
• pp.66-70
• /
• 1992

This paper describes the simplified DTW algorithm for real time korean digit recognition and construct the digit recognition system using that algorithm. The DTW algorithm which is used nowadays have problems on real time recognition because of its massive computation. But, simplified DTW algorithm, which is proposed in this paper, solved these problems. In the case of single syllable, we use the characteristic of uniform distribution of epansion and contraction on time ais, compare distance of input pattern and reference pattern using constrainedly restricted path. As a result, we can reduce a great deal of computation and achieved that the real time korean digit recognition system.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.148-153
• /
• 2023

A digital controller uses a microprocessor and is a controller implemented as a program. This method has the advantage of being more maintenance-friendly than existing analog controllers. However, it inevitably requires computation time to execute the internal program. Therefore, the digital controller uses a method of controlling the system at a certain cycle by considering this time, and this cycle is very closely related to the performance of the microprocessor used. In other words, in the case of very high performance, this control cycle can be shortened to near real time, but this may result in a disadvantage in terms of cost. In this paper, we propose a method to solve this problem by implementing two processors with slightly lower performance in a control system in a series-parallel structure. For this purpose, we will use a digital distributed control system and implement an experimental system to examine its effectiveness.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.322-326
• /
• 2003

In this paper, we establish a new robust $H_{\infty}$ performance condition for uncertain discrete-time systems with convex polytopic uncertainties. We express the condition as a set of linear matrix inequalities (LMIs), which are used to check stability and $H_{\infty}$ disturbance attenuation level by a parameter-dependent Lyapunov matrix. We show that the new condition provides less conservative result than the existing ones which use single Lyapunov matrix. We also show that the robust $H_{\infty}$ state feedback design problem for such uncertain discrete-time systems can be easily dealt with using the approach. The key point in this paper is to propose a kind of decoupling between the Lyapunov matrix and the system matrices in the parameter-dependent matrix inequality by introducing one new matrix variable.

• Journal of Korea Multimedia Society
• /
• v.22 no.4
• /
• pp.424-431
• /
• 2019

In this paper, we propose a real-time hand gesture recognition algorithm to eliminate the inconvenience of using hand controllers in VR applications. The user's 3D hand coordinate information is detected by leap motion sensor and then the coordinates are generated into two dimensional image. We classify hand gestures in real-time by learning the imaged 3D hand coordinate information through SSD(Single Shot multibox Detector) model which is one of CNN(Convolutional Neural Networks) models. We propose to use all 3 channels rather than only one channel. A sliding window technique is also proposed to recognize the gesture in real time when the user actually makes a gesture. An experiment was conducted to measure the recognition rate and learning performance of the proposed model. Our proposed model showed 99.88% recognition accuracy and showed higher usability than the existing algorithm.

• Journal of Gastric Cancer
• /
• v.14 no.3
• /
• pp.156-163
• /
• 2014

Purpose: Information regarding antimicrobial prophylaxis (AMP) for gastric cancer surgery is limited. The present study investigated the efficacy of single-dose AMP for the prevention of surgical site infection (SSI) in patients undergoing gastrectomy for gastric carcinoma. Materials and Methods: Between 2011 and 2013, 1,330 gastric carcinoma surgery patients were divided into two AMP administration groups depending on the duration of treatment. Postoperative outcomes including morbidity and SSI were compared between the two groups overall and in matched patients. Risk factors for SSI were analyzed. Results: The extended group (n=1,129) received AMP until postoperative day 1 and the single-dose group (n=201) received single-dose AMP only during an operation. Postoperatively, there were no significant differences between the two groups with respect to overall morbidity, mortality, or length of hospital stay. The SSI rate of the single-dose group was not significantly different from that of the extended group overall (4.5% vs. 5.5%, respectively, P=0.556) or in matched patients (4.5% vs. 4.0%, respectively, P=0.801). There was no increase in the SSI rate of the single-dose group compared to the extended group in subgroups based on different clinicopathological and operative factors. Univariate and multivariate analyses revealed male gender, open surgery, and operating time (${\geq}180$ minutes) as independent risk factors for SSI. Conclusions: Single-dose AMP showed no increase in the postoperative SSI rate compared to postoperative extended use in patients undergoing gastrectomy for gastric carcinoma. The efficacy of single-dose AMP requires further investigation in randomized clinical trials specific to gastric cancer surgery.

• Tuberculosis and Respiratory Diseases
• /
• v.62 no.5
• /
• pp.406-416
• /
• 2007

Background: Single nucleotide polymorphisms (SNPs), which consist of a substitution of a single nucleotide pair, are the most abundant form of genetic variations occurring with a frequency of approximately 1 per 1000 base pairs. SNPs by themselves do not cause disease but can predispose humans to disease, modify the extent or severity of the disease or influence the drug response and treatment efficacy. Single nucleotide polymorphisms (SNPs), particularly those within the regulatory regions of the genes often influence the expression levels and can modify the disease. Studies examining the associations between SNP and the disease outcome have provided valuable insight into the disease etiology and potential therapeutic intervention. Traditionally, the genotyping of SNPs has been carried out using polymerase chain reaction-restriction fragment length polymorphism(PCR-RFLP), which is a low throughput technique not amenable for use in large-scale SNP studies. Recently, TaqMan real-time PCR chemistry was adapted for use in allelic discrimination assays. This study validated the accuracy and utility of real-time PCR technology for SNPs genotyping Methods: The SNPs in promoter sequence (-37 and -524) of lung cancer suppressor gene, RRM1 (ribonucleotide reductase M1 subunit) with the genomic DNA samples of 89 subjects were genotyped using both real-time PCR and PCR-RFLP. Results: The discordance rates were 2.2% (2 mismatches) in -37 and 16.3% (15 mismatches) in -524. Auto-direct sequencing of all the mismatched samples(17 cases) were in accord with the genotypes read by real-time PCR. In addition, 138 genomic DNAs were genotyped using real-time PCR in a duplicate manner (two separated assays). Ninety-eight percent of the samples showed concordance between the two assays. Conclusion: Real-time PCR allelic discrimination assays are amenable to high-throughput genotyping and overcome many of the problematic features associated with PCR-RFLP.

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.583-593
• /
• 2022

The harvesting system in South Korea faces the problems of aging workers and high wages, so it is necessary to improve the operation system and train workers to use high-performance forestry machines. This study compared the effectiveness and costs of yarding and processing operations between a multi-operation system using a tower yarder (HAM300) and a processor (KESLA 20SH) with those of a single-system using a forestry combi-machine. A whole-tree (cable) yarding operation was conducted in the clear-cutting area located at Compartment 15, Gwangneung Experimental Forest, National Institute of Forest Science, and the productivity and cost of multi- and single-system were analyzed. The productivity of the single-system was 1.5 m³/PMH and 1.6 m³/PMH higher than that of the multi- system because the single-system produced 1 log/cycle more than the multi-system in the yarding operation. The cost was approximately 12.1% lower for the single-system (￦36,113/m³) than for the multi-system (￦41,065/m³). The costs of the single-system and multi-system were decreased by maximums of 22.6% and 15.9%, respectively, by decreasing the idle time.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.32-32
• /
• 2013

The Korean VLBI Network (KVN) as a world-first multi-frequency VLBI system is operated at four bands of 22, 43, 86, and 129 GHz simultaneously. The performances of both single dish and VLBI network were already confirmed through single dish researches and VLBI evaluation test observations. The VLBI common use of the KVN at 22/43 GHz bands has been started from this autumn. The combined network of KVN and Japanese VERA (KaVA) will start the common use from the first half of next year. Here we present several observational results in the fields of star forming regions, late-type stars, and active galactic nuclei using the KVN and KaVA. The fringes of 44 GHz $CH_3OH$ (Class I) masers were detected from 26 sources for the first time using the KVN and imaging observations are under performing. Simultaneous observations of SiO and $H_2O$ masers toward about 1000 evolved stars showed the different maser properties between SiO and $H_2O$ masers according to the evolutionary stages of AGB and post-AGB stars. The catalog of correlated flux densities were established from a 43 GHz (Q-band) survey of 637 extragalactic sources. At 22 GHz (K-band), flux density measurement and fringe survey for new sources were performed toward a large number of sources. In addition, the large program of KVN and/or KaVA under planning is introduced.

• Coupled systems mechanics
• /
• v.8 no.2
• /
• pp.129-146
• /
• 2019

The main goal of this work is to develop a numerical simulator to study an isothermal single-phase two-component flow in a naturally fractured oil reservoir, taking into account advection and diffusion effects. We use the Peng-Robinson equation of state with a volume translation to evaluate the properties of the components, and the discretization of the governing partial differential equations is carried out using the Finite Difference Method, along with implicit and first-order upwind schemes. This process leads to a coupled non-linear algebraic system for the unknowns pressure and molar fractions. After a linearization and the use of an operator splitting, the Conjugate Gradient and Bi-conjugated Gradient Stabilized methods are then used to solve two algebraic subsystems, one for the pressure and another for the molar fraction. We studied the effects of fractures in both the flow field and mass transport, as well as in computing time, and the results show that the fractures affect, as expected, the flow creating a thin preferential path for the mass transport.