• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.391-398
• /
• 2020

If the lost energy produced by a propeller can be partially recovered, the propulsive efficiency can be increased, and the fuel consumption reduced. The devices installed for this purpose are called Energy Saving Devices, of which the Contra-Rotating Propeller system is one of the most effective devices. The first problem to be solved to install the Contra-Rotating Propeller system on a large ship is that the mean pressure generated in the journal bearing needs to meet the design criteria of the classifications. In Korea, however, the practical use is being delayed because it cannot overcome this step. The next step is to lower local pressure to increase the reliability. In this study, to solve the mean pressure problem as the first step of practical use, a product carrier with a short stern shape was selected to reduce the weight of the shafting system, and a suitable shafting-system design plan was proposed. Shaft analysis confirmed that the mean pressure of 0.8 MPa (8 bar), which is a design criterion of the classifications for a journal bearing lining material (white metal), was satisfied. In addition, the necessity of reducing the local pressure was also confirmed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.571-577
• /
• 2012

In this study, a small movable batch treatment system for dredging soil deposited in a rain water tube is proposed; further, a vacuum silo sorting separation device with a vacuum silo, first-stage sorting separator, and conveyor is designed. The vacuum silo sorting separation device also consists of a storage tank, transferring screw, vacuum gate, screen bar, screen bar cleaner, and vacuum discharging device. In view of the fact that the flow of drawn air in the storage tank is a major factor influencing the sorting separation performance, the optimum shape of the tank is determined by CFD flow analysis. In addition, by using CAE structure analysis, the safety of a storage tank made of boards is examined. The specifications of the vacuum silo sorting separation device are determined by conducting mechanical and dynamic simulations of the driving mechanism of the vacuum silo sorting separation device through 3D-CAD modeling. Following this study, we will design a drum-screen-type second sorter, a decanter-type dehydration device, and waste water tank and pump as a secondary device. Further, on the basis of this design, we will construct a prototype model and carry out a field test.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.4
• /
• pp.223-233
• /
• 2011

The aims of this study is about distribution characteristics of tidal coastal landforms, and that changing process in the Hampyeung Bay, which has a semi-enclosed bay like basin shape without inflow of stream, the mouth of open sea is narrow and forms with wide ends toward inland sea. The source of deposits are moved materials by tidal currents and from coastal slopes. Main landform elements of study area consist of tidal flat, tidal channels, intertidal sand bar, sea cliffs, and sea terrace. Tidal flats is classified with mud flat and mixed flat by grain size composition. Mud flats have developed at the shoreline area that tidal flat is closed to the continuity of gentle slope, and mixed flat developed at the foot of the sea cliffs and sea terraces. Quaternary deposits were identified in the coastal materials sedimented by the sea-level change. According to the analysis of grain size composition during last ten years, sands and silt has increased 2% and 6% respectively, clay has been decreased by 9%. The concaved tidal flats are colonized by salt plants. Areal changes of salt plants expanded near four times from 2.4km² at the year 2001 to 9.3km² at the year 2009. During the same periods, mean grain size became coarser from 6.5φ to 4.5φ at the salt plants area.

• Explosives and Blasting
• /
• v.39 no.2
• /
• pp.1-14
• /
• 2021

Recently, with the development of high-performance processing devices such as GPGPU, a three-dimensional dynamic analysis technique that can replace expensive rock material impact tests has been actively developed in the defense and aerospace fields. Experimentally observing or measuring fracture processes occurring in rocks subjected to high impact loads, such as blasting and earth penetration of small-diameter missiles, are difficult due to the inhomogeneity and opacity of rock materials. In this study, a three-dimensional dynamic fracture process analysis technique (3D-DFPA) was developed to simulate the fracture behavior of rocks due to impact. In order to improve the operation speed, an algorithm capable of GPGPU operation was developed for explicit analysis and contact element search. To verify the proposed dynamic fracture process analysis technique, the dynamic fracture toughness tests of the Straight Notched Disk Bending (SNDB) limestone samples were simulated and the propagation of the reflection and transmission of the stress waves at the rock-impact bar interfaces and the fracture process of the rock samples were compared. The dynamic load tests for the SNDB sample applied a Pulse Shape controlled Split Hopkinson presure bar (PS-SHPB) that can control the waveform of the incident stress wave, the stress state, and the fracture process of the rock models were analyzed with experimental results.

• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.306-311
• /
• 2000

Lipid and cholesterol were extracted from beef and pork by the supercritical carbon dioxide $(SC-CO_2)$ for the manufacturing of low-lipid and low-cholesterol sausage. The ranges of extraction temperature and pressure were from 35 to $55^{\circ}C$ and from 103 to 375 bar, respectively. $SC-CO_2$ extraction yield of beef lipid increased as extraction pressure increased and/or extraction temperature decreased, while extraction temperature was more influential on the cholesterol extraction than pressure condition. When lipid and cholesterol of freeze-dried beef with varied moisture contents were extracted, their solubilities increased as the moisture content reduced. The extraction of lipid and cholesterol from pork was shown the same tendency as the beef. The chunk type of beef shape was more suitable for the lipid and cholesterol extraction than the powder type of beef. The color of meat after $SC-CO_2$ extraction was lighter than the raw freeze dried meat because of the extraction of color pigments. After $SC-CO_2$ extraction, beef and pork were rehydrated and mixed with raw beef and pork containing lipid and cholesterol. Their mixing ratio up to 50 : 50 did not affect physical properties of the sausage compared with the control sausage.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.297-302
• /
• 2018

Bead type and hollow fiber type catalyst (HFC, Hollow Fiber type Catalyst) was prepared by $La_{0.1}Sr_{0.9}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ (LSCF1928) perovskite powder catalyst which showed excellent methane complete oxidation characteristics through previous studies. The HFC have a cylindrical shape with an empty interior, and pores can be formed through Phase inversion method so the specific surface area can be remarkably improved. In the case of the bead type catalyst prepared by adding Methyl Cellulose (MC), $SrCO_3$ was produced in addition to the original catalyst composition of LSCF1928 due to the reaction of $CO_2$ emitted from MC and Sr of the catalyst. In the case of the HFC, a single phase perovskite structure was obtained without impurities. The HFC calcined at $700{\sim}900^{\circ}C$ showed pore structure of finger-sponge-finger structure, and 99.9% oxygen conversion rate was achieved through complete oxidation of methane at $475^{\circ}C$. Air gap and spinning pressure condition were changed to control the HFC pore. 2 cm air gap and 7 bar spinning pressure showed the best catalytic performance and achieved oxygen conversion rates of more than 70.65%, 93.01%, and 99.99% at $425^{\circ}C$, $450^{\circ}C$ and $475^{\circ}C$, respectively.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.4
• /
• pp.77-86
• /
• 2013

Laboratory pullout tests were conducted to evaluate pullout performance of steel strip reinforcements with deformed steel bars as transverse members. The steel strip reinforcement has an installation hole to assemble a deformed steel bar. Jumunjin standard sand is used to form a relative density of ground model to 80%. Frictional resistance of steel strip reinforcement without transverse member increases sharply at the initial displacement and quickly decreases with displacement. Maximum frictional resistance increases linearly as normal pressure increasing, and soil-reinforcement interaction friction angle(${\rho}_{peak}$) of a steel strip reinforcement is estimated to $14.64^{\circ}$. Passive resistance increases with displacement and converge into maximum passive resistance in most cases. Maximum passive resistance increases linearly as normal pressure increasing irrespective of shape of the steel reinforcement. Pullout force of steel strip reinforcements with installation holes or transverse members largely increases about 4 to 7 times compared to frictional resistance force of steel strip reinforcements when embedment length($L_e$) of steel strip reinforcements is 500 mm. In the case of using 2 transverse members, interference effect is observed due to the spacing of 2 transverse members and location of assembly holes and transverse members.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.1
• /
• pp.56-67
• /
• 2019

In order to investigate the issue with the proper name of eshel(Tamarix aphylla) mentioned in the Bible, analysis of morphological taxonomy features of plants, studies on the symbolism of the Tamarix genus, analysis of examples in Korean classics and Chinese classics, and studies on the problems found in translations of Korean, Chinese and Japanese Bibles. The results are as follows. According to plant taxonomy, similar species of the Tamarix genus are differentiated by the leaf and flower, and because the size is very small about 2-4mm, it is difficult to differentiate by the naked eye. However, T. aphylla found in the plains of Israel and T. chinensis of China and Korea have distinctive differences in terms of the shape of the branch that droops and its blooming period. The Tamarix genus is a very precious tree that was planted in royal courtyards of ancient Mesopotamia and the Han(漢) Dynasty of China, and in ancient Egypt, it was said to be a tree that gave life to the dead. In the Bible, it was used as a sign of the covenant that God was with Abraham, and it also symbolized the prophet Samuel and the court of Samuel. When examining the example in Korean classics, the Tamarix genus was used as a common term in the Joseon Dynasty and it was often used as the medical term '$Ch{\bar{e}}ngli{\check{u}}$(檉柳)'. Meanwhile, the term 'wiseonglyu(渭城柳)' was used as a literary term. Upon researching the period and name of literature related to $Ch{\bar{e}}ngli{\check{u}}$(檉柳) among Chinese medicinal herb books, a total of 16 terms were used and among these terms, the term Chuísīliǔ(垂絲柳) used in the Chinese Bible cannot be found. There was no word called 'wiseonglyu(渭城柳)' that originated from the poem by Wang Wei(699-759) of Tang(唐) Dynasty and in fact, the word 'halyu(河柳)' that was related to Zhou(周) China. But when investigating the academic terms of China currently used, the words Chuísīliǔ(垂絲柳) and $Ch{\bar{e}}ngli{\check{u}}$(檉柳) are used equally, and therefore, it appears that the translation of eshel in the Chinese Bible as either Chuísīliǔ (垂絲柳) or $Ch{\bar{e}}ngli{\check{u}}$(檉柳) both appear to be of no issue. There were errors translating tamarix into 'やなぎ(willow)' in the Meiji Testaments(舊新約全書 1887), and translated correctly 'ぎょりゅう(檉柳)' since the Colloquial Japanese Bible(口語譯 聖書 1955). However, there are claims that 'gyoryu(ぎょりゅう 檉柳)' is not an indigenous species but an exotics species in the Edo Period, so it is necessary to reconsider the terminology. As apparent in the Korean classics examples analysis, there is high possibility that Korea's T. chinensis were grown in the Korean Peninsula for medicinal and gardening purposes. Therefore, the use of the medicinal term $Ch{\bar{e}}ngli{\check{u}}$(檉柳) or literary term 'wiseonglyu' in the Korean Bible may not be a big issue. However, the term 'wiseonglyu' is used very rarely even in China and as this may be connected to the admiration of China and Chinese things by literary persons of the Joseon Dynasty, so the use of this term should be reviewed carefully. Therefore, rather than using terms that may be of issue in the Bible, it is more feasible to transliterate the Hebrew word and call it eshel.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.4
• /
• pp.255-263
• /
• 2011

Introduction: Maxillomandibular fixation (MMF) is essential before surgery under general anesthesia in maxillofacial trauma patients. MMF is used basically to reconstruct the occlusion and occlusal stability to recover the facial shape and oral functions. The arch bar and wire is a traditional method for MMF, but it can not only bring pressure to the periodontal ligaments and teeth but also cause a penetrating injury to the surgeons. Materials and Methods: In this study, 198 patients with an open reduction using a manual reduction without MMF from September 2005 to May 2010 in Dankook University Dental Hospital were subjected to a follow-up evaluation during the postoperative 4 months periods. This study evaluated the incidence of complications according to the condition of the patient (gender, age), the state of bony union of the fracture sites and a numeric rating scale evaluation for postoperative pain scoring. Results: 1. The complications were classified into major and minor according to the seriousness, and the major complication rate was as low as 2.02%. Only 2 cases of re-operations (1.01%) were encountered. In the classification according to the fracture line, plate fracture was observed in both cases of mandibular symphysis fracture, and angle fractures and loosening of two screws were noted in the case of mandibular angle fracture. 2. The complication rate was similar regardless of gender and age. 3. The degree of bony union was satisfactory, and the complication rate was reduced as the bony union improved. 4. More patients complained of pain as the operation time was increased. Conclusion: The use of MMF is not always necessary if a skilled assistant is provided to help manually reduce the fracture site. Compared to other studies of mandibular fracture surgery using MMF, the complication rate was similar using only manual reduction and the patients' discomfort was reduced without MMF.

• Structural Engineering and Mechanics
• /
• v.77 no.3
• /
• pp.329-342
• /
• 2021

In this paper, the effect of different steel bar configurations on the quasi-static punching and impact response of concrete slabs was studied. A total of forty RC square slab specimens were cast in two groups of concrete strengths of 40 and 63 MPa. In each group of twenty specimens, ten specimens were reinforced at the back face (singly reinforced), and the remaining specimens were reinforced on both faces of the slab (doubly reinforced). Two rebar spacing of 25 and 100 mm, with constant reinforcement ratio and effective depth, were used in both singly and doubly reinforced slab specimens. The specimens were tested against the normal impact of cylindrical projectiles of hemispherical nose shape. Slabs were also quasi-statically tested in punching using the same projectile, which was employed for the impact testing. The experimental response illustrates that 25 mm spaced rebars are effective in (i) decreasing the local damage and overall penetration depth, (ii) increasing the absorption of impact energy, and (iii) enhancing the ballistic limit of RC slabs. The ballistic limit was predicted using the quasi-static punching test results of slab specimens showing a strong correlation between the dynamic perforation energy and the energy required for quasi-static perforation of slabs.