• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.712-715
• /
• 2018

ZnO 시드 막 위에 수열합성법으로 나노로드를 성장시켰다. 고주파 스퍼터링으로 증착한 ZnO 박막을 $600^{\circ}C$에서 열처리한 후 시드 막으로 사용하였다. 성장된 ZnO 나노로드를 $400^{\circ}C$ 및 $800^{\circ}C$에서 열처리하였다. ZnO 나노로드의 열처리에 따른 구조적 및 광학적 특성을 고찰하였다. ZnO 나노로드를 $400^{\circ}C$에서 열처리함으로써 강도가 크고 반폭치가 좁은 자외선 피크를 얻을 수 있었다.

• 정보처리학회논문지C
• /
• 제12C권1호
• /
• pp.129-136
• /
• 2005

웹데브(WebDAV)는 HTTP/1.1의 확장된 프로토콜로서 인터넷을 통하여 분산된 저작과 버전관리를 지원한다. 웹데브의 주요 기능인 속성관리는 저장소의 역할과 함께 자원의 추가 정보를 관리하고 활용할 수 있는 장점을 가지고 있다. 지금까지 대부분의 웹데브를 지원하는 응용 시스템은 속성 관리 기능의 활용보다는 단순 저장소의 역할로 웹데브를 사용하고 있다. 그러나 협업 지원 시스템과 같은 웹데브 기반의 고급 응용 프로그램을 개발하기 위해서는 웹데브 사용자 정의 속성의 설계와 활용이 매우 중요하다. 본 논문에서는 웹데브 사용자 정의 속성을 정의한 XML 형식의 환경 설정 속성과 그 처리 수행 절차를 기술한 DavSUDP(WebDAV Simple User-defined Property Definition Protocol) 프로토콜을 제안한다. DavSUDP는 웹데브 기반의 응용 시스템을 개발하는데 있어서 웹데브 서버가 사용자 정의 속성을 효과적으로 관리할 수 있게 하여준다. 이를 보이기 위하여 아파치의 $mod{\_}dav$ 모듈이 DavSUDP를 지원하도록 확장하였으며, 이를 이용하여 iPlace 협업 지원 시스템의 공개작업장을 개발하였다.

• Nuclear Engineering and Technology
• /
• 제46권3호
• /
• pp.413-422
• /
• 2014

Presented in this study are the variations of microstructures and mechanical properties with tempering and Post-Weld Heat Treatment (PWHT) conditions for SA508 Gr.4N steel used as Reactor Pressure Vessel (RPV) material. The blocks of model alloy were austenitized at the conventional temperature of $880^{\circ}C$ then tempered and post-weld heat treated at four different conditions. The hardness and yield strength decrease with increased tempering and PWHT temperatures, but impact toughness is significantly improved, especially in the specimens tempered at $630^{\circ}C$. The sample tempered at $630^{\circ}C$ with PWHT at $610^{\circ}C$ shows optimum mechanical properties in hardness, strength, and toughness, excluding only the transition property in the low temperature region. The microstructural observation and quantitative analysis of carbide size distribution show that the variations of mechanical properties are caused by the under-tempering and carbide coarsening which occurred during the heat treatment process. The introduction of PWHT results in the deterioration of the ductile-brittle transition property by an increase of coarse carbides controlling cleavage initiation, especially in the tempered state at $630^{\circ}C$.

• 한국염색가공학회지
• /
• 제15권6호
• /
• pp.1-7
• /
• 2003

Polyester microfiber has usually greater dye uptake than normal denier polyester fiber in same dyeing condition. In spite of this high dye uptake dyed microfiber fabric has not only low visual colour depth but also poor washing fastness property. In order to study high colouring dyeing technology and high washing fastness of polyester microfiber, dyeing property of polyester microfiber was investigated according to the dye solubility and particle size of used disperse dyes in aqueous dye solution. After disperse dyeing, dyed fabric with disperse dye was redyed with a vat dye without reduction clearing in order to obtain a high washing fastness property. The result were as followings ; A small particle sized disperse dyes such as C. I. Disperse Blue 56 and Red 60 showed high rate of initial exhaution compared with a large particle sized disperse dyes like C. I. Disperse Blue 165 and Red 343. In study of dyeing property of polyester microfiber with C. I. Vat Blue 1, polyester microfiber could achieve high dye uptake at a given optimum vatting process conditions. On the other hand, in consecutive dyeing with disperse and vat dye, K/S value of polyester microfiber with a small particle sized disperse dye increased without reduction clearings, but K/S value of polyester microfiber with a large particle sized disperse dye decreased with reduction clearings.

• 한국주조공학회지
• /
• 제8권3호
• /
• pp.271-281
• /
• 1988

Al-bronze has a good mechanical property, corrosion resistance and castability, so being highlighted for the new copper alloy. So, effects of alloy composition and cooling rate in the mechaincal properties and solidification behavior have been investigated. The results obtained are as follows; 1) Change in volume on solidification is larger in metal mold casting than in sand mold casting. And it decreases by the addition of Al. 2) The mechanical property in metal mold casting is superior to the one in sand mold casting, and the inclination is obvious up to 9% Al, after heat-treatment ($885^{\circ}C$, $1.5hrs\;{\rightarrow}\;W\;{\cdot}\;Q\;{\rightarrow}\;540^{\circ}C$, 3hrs) 3) By adding Al, the mechanical property is slightly increased up to 9% Al, Above 9% Al, it is increased rapidly, and is accelerated by adding Fe. 4) Cooling rate and hardness, and grain size and cooling rate are related as follows in the range of $1100^{\circ}C$ to $1200^{\circ}C$ pouring temperature. Grain size(${\mu}m$)=$929.6422{\times}cooling\;rate(^{\circ}C\;/\;sec)^{-0.51537}$ Hardness(BHN)=$765.45713{\times}grain\;size({\mu}m)^{-0.31058}$.

• 한국분말재료학회지
• /
• 제13권1호
• /
• pp.25-32
• /
• 2006

The alumina dispersion-strengthened (DS) C15715 Cu alloy fabricated by a powder metallurgy route was annealed at temperatures ranging from $800^{\circ}C\;to\;1000^{\circ}C$ in the air and in vacuum. The effect of the annealing on microstructural stability and room-temperature mechanical properties of the alloy was investigated. The microstructure of the cold rolled OS alloy remained stable until the annealing at $900^{\circ}C$ in the air and in vacuum. No recrystallization of original grains occurred, but the dislocation density decreased and newly formed subgrains were observed. The alloy annealed at $1000^{\circ}C$ in the air experienced recrystallization and grain growth took place, however annealing in vacuum at $1000^{\circ}C$ did not cause the microstructural change. The mechanical property of the alloy was changed slightly with the annealing if the microstructure remained stable. However, the strength of the specimen that was recrystallized decreased drastically.

• 환경위생공학
• /
• 제20권2호
• /
• pp.33-38
• /
• 2005

Chitosan is a dietary fiber because of a linear polysaccharide composed of $\beta-(1{\rightarrow}4)$-linked 2-amino-2-deoxy-D-glucopyranose. In this study, control release system of vitamin C has been estimated in chitosan molecular network as a vitamin C carrier of controlled release. The amount of released vitamin C were decreased in higher amount of chitosan concentration. Especially, vitamin C were slowly released from chitosan solution in dialysis membrane when compared with vitamin C solution alone in dialysis membrane. These result assumed that chitosan driving force is dependent on chitosan molecular weight and cationic property of amino group with anionic property of vitamin C.

• 한국항공우주학회지
• /
• 제48권9호
• /
• pp.663-670
• /
• 2020

2.5D C/SiC를 적용한 구조물의 거동 특성을 유한요소해석으로 근사하기 위해 기계적 물성 특성화와 모델링 기법에 관한 연구를 수행하였다. 2.5D C/SiC 소재의 거동 특성을 분석하기 위해 인장시험을 수행하였고 수학적 균질화 기법과 수정된 혼합 법칙을 적용하여 2.5D C/SiC를 구성하는 섬유와 기지의 탄성 물성을 정의하였다. 탄소성 거동을 나타내는 기지는 소성 영역의 거동을 bilinear 함수로 근사하고 시험과 해석의 오차를 최소화하여 등가 항복 강도와 등가 소성 강성을 계산하였다. 그리고 2.5D C/SiC의 RVE를 정의하고 수정된 혼합 법칙을 적용하여 유효강성행렬을 계산하는 과정을 ABAQUS의 User-defined subroutine을 통해 구성하였다. 제안된 과정을 바탕으로 정의된 섬유와 기지의 기계적 물성을 적용하여 유한요소해석을 수행한 결과는 시험의 거동을 잘 근사하고 있음을 확인하였다.

• 한국세라믹학회지
• /
• 제43권10호
• /
• pp.653-659
• /
• 2006

The glass-SiC composites have been manufactured via viscous flow of glass for investigating their sinterability and various properties. The relative density of 99.6% could be achieved when 5 wt% SiC was mixed with glass powder, glass-rearranged at 460$^{\circ}C$ for 3 h and then sintered at 665$^{\circ}C$ for 1 h. The sintered density was decreased as adding more than 5 wt% SiC to glass powder. The resistance properties against hyper velocity copper jet formed by explosion of K215 warhead were compared with other ceramics such as $Al_2O_3$ and pyrex, resulting in lower values than that of $Al_2O_3$.

• 열처리공학회지
• /
• 제16권3호
• /
• pp.127-133
• /
• 2003

The effect of chemical composition on the microstructural change and tensile property in TRIP-assisted steels with different chemical composition was investigated by using SEM, TEM, XRD and UTM. As a result of microscopic observation, the morphology of retained austenite could be identified as two types; a granular type in a steel containing higher Si and a film type in a steel having higher C. For the case of higher C-containing steel with a tensile strength of 860 MPa and a total elongation of 38%, film-typed retained austenite could be observed between lath bainitic ferrite. Actually, metastable retained austenite was a requisite for the good formability, which means that chemical composition plays a significant role in the microstructure and tensile property of TRIP-assisted steels. With respect to tensile property, the steels containing suitable Si and Mn, respectively, showed a typical TRIP effect in stress-strain curve, while a steel containing higher Mn content exhibited the similar behavior shown in dual phase steel.