• Journal of Korea Technology Innovation Society
• /
• v.12 no.2
• /
• pp.430-456
• /
• 2009

The industrial Technology Development Program enables the recipient to set up technology infrastructure and to facilitate technology diffusion. In return, government charges royalties to the program recipient. However, the current royalty system is not effective form. This study analyzes the various aspects of royalty collection methods applied to the Industrial Technology Development Program and recommends the following: a) to establish a royalty collection system with appropriate charges for both fixed royalties and running royalties, dependent upon type of technology development b) to seek a method to setup different collection periods for industrial categories in consideration of product life cycle c) to review on ownership of intangible property. In addition, in order to manage the entire royalty process effectively, prompt establishment is needed in order for a responsible evaluation institute to create task forces to evaluate technology value, to transfer technology, to support technology commercialization, to collect and manage royalty and expand and report result.

• Journal of Korea Multimedia Society
• /
• v.12 no.2
• /
• pp.200-208
• /
• 2009

JBIG2, as the next generation standard for binary image compression, must be designed in hardware modules for the JBIG2 FAX to be implemented in an embedded equipment. This paper proposes a hardware module of the high-speed Huffman coder for JBIG2. The Huffman coder of JBIG2 uses selectively 15 Huffman tables. As the Huffman coder is designed to use minimal data and have an efficient memory usage, high speed processing is possible. The designed Huffman coder is ported to Virtex-4 FPGA and co-operating with a software modules on the embedded development board using Microblaze core. The designed IP was successfully verified using the simulation function test and hardware-software co-operating test. Experimental results shows the processing time is 10 times faster than that of software only on embedded system, because of hardware design using an efficient memory usage.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.365-372
• /
• 2004

The laser welding and its analysis were carried out using high power 6kW $CO_2$ laser for high strength steels such as DP, TRIP and conventional high strength steels. Bead on plate welding of thin sheet was examined to investigate the effect of weld variables of laser welding, and to obtain optimum welding condition. In order to investigate the formability of welded high strength steels, LDH test was added on this work. At high welding speed, the partial penetration was obtained by low heat input. Meanwhile, porosity was formed in the bead at low weld speed because of extremely higher heat input. The optimum welding condition of welding was derived from bead width, penetration and hardness property. It was shown that the DP steels had lower porosity level and smooth bead shape, therefore better laser weldability than TRIP steels and conventional high strength steels. In addition, LDH test shows that the welded DP steels have about $90\%$ formability value of base metal, although TRIP steel and conventional high strength steels have about $80\%$ formability value of its base metal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12C
• /
• pp.1135-1142
• /
• 2006

This article presents a new asynchronous MC-CDMA system to implement multiple data rate communications. In a W-CDMA downlink, the OVSF code is used for spreading code for various multimedia traffic. Proposed system utilizes the OVSF code that generated by generation property for spreading. The proposed MC-CDMA system use different lengths of OVSF code as a spreading code according to their data rate. The groupwise processing is accomplished by code grouping in OVSF code generation tree. Between each group, the code grouping interference canceller is performed to cancel other group interference. At that time the proposed receiver does not require any information about interference users. For the analysis of average BER performance, we propose system model and computer simulation were used. We also compare the system performance with that of a single rate MC-CDMA system used orthogonal code as a spreading code.

• Journal of the Korean Ceramic Society
• /
• v.48 no.1
• /
• pp.94-98
• /
• 2011

A Sn-doped $In_2O_3$ (ITO) nanowire photoelectrode was produced using a simple metal evaporation method at low synthesis temperature (< $540^{\circ}C$). The nanowire electrodes have large surface area compared with that of flat ITO thin film, and show low electrical resistivity of $5.6{\times}10^{-3}{\Omega}cm$ at room temperature. In order to apply ITO nanowires to the photoelectrodes of dye-sensitized solar cell (DSSC), those surfaces were modified by $TiO_2$ nanoparticles using a chemical bath deposition (CBD) method. The conversion efficiency of the fabricated $TiO_2$/ITO nanostructure-based DSSC was obtained at 1.4%, which was increased value by a factor of 6 than one without ITO nanowires photoelectrode. This result is attributed to the large surface area and superior electrical property of the ITO nanowires photoelectrode, as well as the structural advantages, including short diffusion length of photo-induced electrons, of the fabricated $TiO_2$/ITO nanostructure-based DSSC.

• Molecules and Cells
• /
• v.27 no.3
• /
• pp.351-357
• /
• 2009

Phytoestrogens are the natural compounds isolated from plants, which are structurally similar to animal estrogen, $17{\beta}$-estradiol. Tectoridin, a major isoflavone isolated from the rhizome of Belamcanda chinensis. Tectoridin is known as a phytoestrogen, however, the molecular mechanisms underlying its estrogenic effect are remained unclear. In this study we investigated the estrogenic signaling triggered by tectoridin as compared to a famous phytoestrogen, genistein in MCF-7 human breast cancer cells. Tectoridin scarcely binds to ER ${\alpha}$ as compared to $17{\beta}$-estradiol and genistein. Despite poor binding to ER ${\alpha}$, tectoridin induced potent estrogenic effects, namely recovery of the population of cells in the S-phase after serum starvation, transactivation of the estrogen response element, and induction of MCF-7 cell proliferation. The tectoridin-induced estrogenic effect was severely abrogated by treatment with U0126, a specific MEK1/2 inhibitor. Tectoridin promoted phosphorylation of ERK1/2, but did not affect phosphorylation of ER ${\alpha}$ at $Ser^{118}$. It also increased cellular accumulation of cAMP, a hallmark of GPR30-mediated estrogen signaling. These data imply that tectoridin exerts its estrogenic effect mainly via the GPR30 and ERK-mediated rapid nongenomic estrogen signaling pathway. This property of tectoridin sets it aside from genistein where it exerts the estrogenic effects via both an ER-dependent genomic pathway and a GPR30-dependent nongenomic pathway.

• Food Science of Animal Resources
• /
• v.31 no.5
• /
• pp.676-683
• /
• 2011

The aim of this study was to compare the physicochemical changes of hot-boned chicken breast and leg muscles. Chicken breast and leg muscles from 56 broilers were excised within a 15 min post-mortem (PM) and stored at $20^{\circ}C$. Physicochemical traits were determined at 0.5, 6, 12, and 24 h PM. The ultimate pH of leg muscle was higher than that of breast muscle (p<0.05). The content of glycogen in the breast muscle was relatively higher than that in the leg muscle until 6 h PM (p<0.05). R-values showing rigor mortis of breast and leg muscles were completed after or before 6 h PM. Breast muscle had less cooking loss than leg muscle (p<0.05). Drip loss did not significantly differ between breast and leg muscles with the exception of that at 6 h PM. The sarcomere length of leg muscle was relatively longer than that of breast muscle (p<0.05). The MFI of leg muscle was significantly lower than that of breast muscle (p<0.05). The shear force of leg muscle was lower than that of breast muscle at 6 and 12 h PM (p<0.05); however, that of both muscles did not significantly differ at 24 h PM.

• Korean Journal of Food Science and Technology
• /
• v.27 no.2
• /
• pp.170-175
• /
• 1995

Physical and physiological properties of isomaltooligosaccaride (IMO), fructooligosaccharide (FO) and sucrose were investigated. The viscosity and moisture retention power of IMO were similar to those of FO. IMO had an excellent heat and pH stability compared with FO and sucrose. To investigate the effect of oligosaccharides on the growth of mice, each sample was administered orally to mice for 2 weeks. Weight change, moisture content of feces, weight of appendix and the ratio of Bifidobacterium to total microorganisms in the feces were examined. There were no significant differences in the weight increases and the efficiency of feeds. Moisture content of feces was highest in the IMO feeding group, and IMO promoted selectively the growth of Bifidobacterium. On the other hand, FO group showed bigger cecum than other groups.

• Textile Coloration and Finishing
• /
• v.29 no.3
• /
• pp.115-121
• /
• 2017

Demands for nylon suede as an artificial leather are increasing due to its functionality and aesthetics. To achieve high value added nylon suede based on green technology, this study was carried out in order to obtain useful data for the nylon suede fabrics with eco-friendly dyeing process by a pad-steam method instead of a dip dyeing process using sulphur black dye to reduce the industrial waste of water. The dyeability of the nylon suede was investigated according to reducing temperatures, dye concentrations, and reducing agent's concentrations. Throughout the results of the CIE $L^*a^*b^*$ and Munsell values, the optimized dyeing conditions of the nylon suede using sulphur black dye are $70^{\circ}C$ of dyeing temperature, 30% o.w.f. of dye concentration, and $9g/{\ell}$ of reduction agent concentration, respectively. Furthermore washing colorfastness, light colorfastness and perspiration colorfastness were achieved in the range of 4-5 grades.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.8
• /
• pp.663-669
• /
• 2001

Spinel LiM $n_2$ $O_4$ and LiM $n_{1.9}$M $g_{0.1}$ $O_4$ power was synthesized with solid-state method by calcining the mixture of LiOH.$H_2O$, Mn $O_2$ and MgO at 80$0^{\circ}C$ for 36 h in an air atmosphere. To investigate the effect of temperature on he cycle performance of cathode material during cycling, charge-discharge experiments and ac impedance measurement were performed. Initial discharge capacity was gradually increased with the increase of charge-discharge temperature. Discharge capacity at high temperature was suddenly decreased during cycling. On the other hand, discharge capacity at low temperature was almost constant during cycling. It confirmed that Mn dissolution is serious at high temperature than at low temperature. LiM $n_2$ $O_4$ and LiM $n_{1.9}$M $g_{0.1}$ $O_4$ showed the best capacity and stability at room temperature.ure.ure.