• Composites Research
• /
• v.26 no.4
• /
• pp.254-258
• /
• 2013

Polypropylene films reinforced with multi-walled carbon nanotubes and exfoliated graphite nanoplatelets were fabricated by extrusion, and the effects of filler type and take-up speed on the mechanical properties and microstructure of composite films were investigated. Differential scanning calorimetry revealed that the addition of carbon nanomaterials resulted in increased degree of crystallinity. However, increasing the take-up speed reduced the degree of crystallinity, which indicates that tension-induced orientations of polymer chains and carbon nanomaterials and the loss of degree of crystallinity due to rapid cooling at high take-up speeds act as competing mechanisms. These observations were in good agreement with tensile properties, which are governed by the degree of crystallinity, where the C-grade exfoliated graphite nanoplatelet with a surface area of $750m^2/g$ showed the greatest reinforcing effect among all types of carbon nanomaterials used. Scanning electron microscopy was employed to observe the carbon nanomaterial dispersion and orientation, respectively.

• Advances in concrete construction
• /
• v.10 no.1
• /
• pp.81-92
• /
• 2020

Flexural and splitting strength behavior of conventional concrete can significantly be improved by incorporating the fibers in it. A significant number of research studies have been conducted on various types of fibers and their influence on the tensile capacity of concrete. However, as an important property, tensile capacity of fiber reinforced concrete (FRC) is not modelled properly. Therefore, this paper intends to formulate a model based on experiments that show the relationship between the fiber properties such as the aspect ratio (length/diameter), fiber content, compressive strength, flexural strength and splitting strength of FRC. For the purpose of modeling, various FRC mixes only with steel fiber are adopted from the existing research papers. Automated neural network search (ANS) is then developed and used to investigate the effect of input parameters such as fiber content, aspect ratio and compressive strength to the output parameters of flexural and splitting strength of FRC. It is found that the ANS model can be used to predict the flexural and splitting strength of FRC in a sensible precision.

• Journal of Environmental Health Sciences
• /
• v.35 no.5
• /
• pp.393-401
• /
• 2009

We isolated and identified a microorganism which was excellent for ammonia oxidation in the biological control of ammonia gas in odor producing materials from organic composting. The isolated strain was tested for growth characteristics and ammonia elimination efficiency under various conditions of temperature, pH, carbon concentration and ammonia concentration. The strain was isolated from a culture broth used in a $NO_2$ producing test with Griess-Ilosvay reagent. The results of 16S rRNA sequence from the isolated strain by using BLANST (Basic Local Alignment Search Tool) and confirming RDP (Ribosomal Database Project II) and ERRD (The European Ribosomal RNA Database) indicate that the strain is related to Delftia sp. UV-Spectrophotometer (Shimadzu, UVmini-1240) was used as a microbial growth test by measuring turbidity on OD660nm and ammonia concentration was measured by Spectrophotometer (HACH, DR-4000). The optimum growth culture conditions of the ammonia oxidizer Delftia sp. were $30^{\circ}C$, pH 7, glucose concentration 1.00% and $(NH_4)_2SO_4$ 0.5 g/l. Ammonia elimination efficiency was over 94% under the same conditions.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2004.11a
• /
• pp.90-98
• /
• 2004

Nano/micro-scale studies on friction properties were conducted on Si (100) and three self-assembled monolayers (SAMs) (PFOTC, DMDM, DPDM) coated on Si-wafer by chemical vapor deposition technique. Experiments were conducted at ambient temperature $(24{\pm}1^{\circ}C)$ and humidity $(45{\pm}5\%)$. Nano-friction was evaluated using Atomic Force Microscopy (AFM) in the range of 0-40nN normal loads. In both Si-wafer and SAMs, friction increased linearly as a function of applied normal load. Results showed that friction was affected by the inherent adhesion in Si-wafer, and in the case of SAMs the physical/chemical structures had a major influence. Coefficient of friction of these test samples was also evaluated at the micro-scale using a micro-tribotester. It was observed that SAMs had superior frictional property due to their low interfacial energies. In order to study of the effect of contact area on friction coefficient at the micro-scale, friction was measured for Si-wafer and DPDM against Soda Lime balls (Duke Scientific Corporation) of different radii 0.25 mm, 0.5 mm and 1 mm at different applied normal loads $(1500,\;3000\;and\;4800{\mu}N)$. Results showed that Si-wafer had higher friction coefficient than DPDM. Furthermore, unlike that in the case of DPDM, friction was severely influenced by wear in the case of Si-wafer. SEM evidences showed that solid-solid adhesion to be the wear mechanism in Si-wafer.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.7
• /
• pp.1053-1060
• /
• 2010

Cordyceps militaris, an entomopathogenic fungus belonging to the class Ascomycetes, has been reported to have beneficial biological activities such as hypoglycemic, anti-inflammatory, antitumor, antimetastatic, hypolipidemic, immunomodulatory, and antioxidant effects. In this study, the crude water-soluble polysaccharide CMP, which was obtained from the fruiting body of C. militaris by hot water extraction and ethanol precipitation, was fractionated by DEAE-cellulose and Sepharose CL-6B column chromatographies. This process resulted in three polysaccharide fractions, termed CMP Fr I, CMP Fr II, and CMP Fr III. Of these fractions, CMP Fr II, with an average molecular mass of 127 kDa, was able to upregulate effectively the phenotypic functions of macrophages such as NO production and cytokine expression. The chemical property of the stimulatory polysaccharide, CMP Fr II, was determined based on its monosaccharide composition, which consisted of glucose (56.4%), galactose (26.4%), and mannose (17.2%). Its structural characteristics were investigated by a combination of chemical and instrumental analyses, including methylation, reductive cleavage, acetylation, Fourier transform infrared spectroscopy (FTIR), and gas chromatography-mass spectrometry (GCMS). Results indicated that CMP Fr II consisted of the (1${\rightarrow}$4) or (1${\rightarrow}$2) linked glucopyranosyl or galactopyranosyl residue with a (1${\rightarrow}$2) or (1${\rightarrow}$6) linked mannopyranosyl, glucopyranosyl, or galactopyranosyl residue as a side chain. The configuration of the ${\beta}$-linkage and random coil conformation of CMP Fr II were confirmed using a Fungi-Fluor kit and Congo red reagent, respectively.

• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.393-398
• /
• 2013

Two types of polymeric micro-needles with 250 and $750{\mu}m$ lengths were prepared by a micromolding process. The geometry of dissolving micro-needles with minoxidil was investigated and the mechanical property of polymer micro-needles was also evaluated. Water dissolving micro-needles containing minoxidil were successfully inserted into skin and delivered minoxidil to the skin layer after 30 min of insertion. The observed hair growth was less when the minoxidil treatment was not applied or used without the micro-needles than that the minoxidil was applied by micro-needles. Histologically, these hair follicles became bigger, and the hair papillae were totally encircled by the hair bulbs. In this feasibility test, we show the successful delivery of minoxidil, and effective treatment of hair loss can be possible by using dissolving micro-needles with minoxidil.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.551-554
• /
• 2002

As a general rule, the brazing process between cemented carbides and steel used by Silver (Ag) type brazing filler. The composition of Ag type filler were used Ag-Cu-Zn-Cd type filler mainly. But, the demand of Cadmium (Cd)-free in Ag type filler was raised recently. The reason why Cd-free in Ag brazing filler were occupied to vaporize as a CdO$_2$ when brazing process, because of Cd element was almost low boiling point of all Ag type filler elements. And, CdO$_2$ was a very harmful element for the human body. This experiment was developed Cd-freeing on Ag type filler that was used Indium (In) instead of Cd element. In this experiment, there were changed from 0 to 5% In addition in Ag brazing filler and investigated to most effective percentage of Indium. As a result, the change of In addition instead of Cd, there was a very useful element and obtained same property only 3% In added specimens compared to Cd 19% added specimens. These specimens were obtained same or more deflective strength. In this case, there were obtained 70 MPa over strength and wide brazing temperature range 650-800 C. A factor of deflective strength were influenced by composition and the shape of $\beta$ phase and between $\beta$ phase and cemented carbides interface. Indium element presented as $\alpha$ phase and non-effective factor directly, but it's occupied to solid solution hardening as a phase. $\beta$ phase were composed 84-94% Cu-Ni-Zn elements mainly. Especially, the presence of Ni element in interface was a very important factor. Influence of condensed Ni element in interface layer was increased the ductility and strength of brazing layer. Therefore, these 3% In added Ag type filler were caused to obtain a high brazing strength.

• The Korea Journal of Herbology
• /
• v.27 no.4
• /
• pp.1-7
• /
• 2012

Objectives : In this study, we investigated the effect of KOB, a polyherbal medicine for allergic rhinitis and its main herb, Astragali Radix on allergic responses in ovalbumin (OVA)-induced Allergic rhinitis(AR) mice. Methods : Sprague Dawley (SD)-rats were orally administrated with KOB (500 mg/kg), Astragali Radix water extract (ARW, 100 mg/kg) or anti-histamine drug, dosodium cromoglycate (50 mg/kg) as a reference drug, and then intraperitoneally injected with compound 48/80 (8 mg/kg). Rats were measured the mortality and serum levels of histamine. BALB/c mice were orally administrated with KOB (500 mg/kg), ARW (100 mg/kg) or anti-histamine drug, Ketotifen (10 mg/kg) as a reference drug, followed by sensitization and challenge of OVA. Mice were measured the serum levels of histamine and IgE, and observed histopathological changes of nasa mucosa H&E staining. Results : KOB and ARW significantly decreased the mortality and the serum levels of histamine in compound 48/80-induced anaphylatic rats. KOB and ARW also decreased the serum levels of histamine and IgE in OVA-induced AR mice, and inhibited histopathological changes of nasal mucosa with inflammation and the eosinophils infilteration. Conclusions : These data suggest that KOB has a strong anti-allergic effect through the inhibitory property of Astragali Radix, the main component of KOB against allergic responses in allergic rhinitis.

• Fisheries and Aquatic Sciences
• /
• v.12 no.4
• /
• pp.258-264
• /
• 2009

A commercial diet supplemented with carotenoids and conjugated linoleic acid was fed to rainbow trout (Oncorhynchus mykiss) for 8 weeks. To investigate the anti-oxidative properties of these compounds, lipids from the muscle and viscera of the fish were subjected to different assays. At $10\;{\mu}g/mL$, L-ascorbic acid exhibited 95% 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical-scavenging activity, while the tissue lipids showed little radical scavenging activity. At 50 and $100\;{\mu}g/mL$, the lipids of the muscles and viscera showed 11.7-22.6% and 11.3-24.9% DPPH radical-scavenging activity, respectively. A lipid peroxidation inhibitory assay using the ferric thiocyanate method was also performed in comparison with $\alpha$-tocopherol at a concentration of 6.0 mg/mL. Our results indicate that the anti-oxidative property of the lipids in fish muscle, which was 85.2% compared to 85.3% for the visceral lipids, was stronger than that of $\alpha$-tocopherol (74.3%) following 3 days of storage at $40^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.5
• /
• pp.681-686
• /
• 2004

Ti-ZSM-5 prepared by secondary synthesis, from the reaction of H-ZSM-5 with vapor phase $TiCl_4$, was characterized with several physicochemical techniques including FT-IR and UV/VIS-DRS. It was found that zeolite structure, surface area and pore volume did not change, and the framework aluminum could not be replaced by titanium atom during the secondary synthesis of Ti-ZSM-5. The incorporation of titanium into the framework might be due to reaction of $TiCl_4$with the silanol groups associated with defects or surface sites. The formation of extra-framework titanium could not be avoided, unless the samples were further treated by water vapor at 550 $^{\circ}C$ or higher temperature. High temperature steam treatment of Ti-ZSM-5 prepared by chemical vapor deposition with $TiCl_4$was efficient to prevent the formation of non-framework titanium species. Ti-ZSM-5 zeolites prepared in this work contained only framework titanium species and exhibited improved catalytic property close to TS-1 prepared by hydrothermal synthesis.