• Journal of the Korean Ceramic Society
• /
• v.40 no.5
• /
• pp.428-433
• /
• 2003

In this study, we investigated the variation of microstructural and electromagnetic properties of YIG ferrites for Isolator/Circulator application with the sintering temperature and Zr addition. The composition of the ferrites was Y$_{2.1}$Ca$_{0.9}$Fe$_{4.4-x}$V$_{0.5}$In$_{0.05}$Al$_{0.05}$Zr$_{x}$O$_{12}$ with x=0, 0.05, 0.1 and 0.2. The YIG ferrites were prepared by the conventional ceramic sintering process. The Zr-substituted YIG ferrite, Y$_{2.1}$ Ca$_{0.9}$Fe$_{4.4-x}$V$_{0.5}$In$_{0.05}$Al$_{0.05}$ Zr$_{x}$O$_{12}$ showed the highest saturation magnetization (1097 gauss) at x=0.1. The microwave properties were shown as isolation of 18.60 dB and insertion loss of 0.45 dB at x=0.2. Additionally, Zr-substitution was effective in decreasing ferromagnetic resonance linewidth with Zr content.

• Korean Journal of Pharmacognosy
• /
• v.45 no.4
• /
• pp.275-281
• /
• 2014

After harvesting the medicinal parts of Curcuma longa, the remaining underground parts were discarded. From the remaining underground parts of Curcuma longa quercetin-3-O-${\beta}$-D-glucopyranoside-7-O-${\alpha}$-L-rhamnopyranoside (Q37) was isolated. The antioxidant activities in vitro and lifespan-extension effect of Q37 were elucidated using the Caenorhabditis elegans. The 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging effect of Q37 showed similar potent activities in comparison with vitamin C. Q37 also showed potent superoxide quenching activities as measured by the riboflavin- and xanthine-originated superoxide quenching activity tests. Q37 prolonged lifespan of worms under normal culture condition. In terms of protective effect of Q37 on the stress conditions such as thermal and oxidative stresses, Q37-treated worms exhibited enhanced survival rate, as compared to control worms. To know the possible mechanism of Q37-mediated increased lifespan and stress resistance of worms, we examined the activities of Q37on superoxide dismutase (SOD), and invested intracellular reactive oxygen species (ROS) levels. The results revealed that Q37 was able to elevate SOD activity of worms and reduce intracellular ROS accumulation in a dose-dependent manner.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.4
• /
• pp.160-164
• /
• 2008

Insulating and conducting 12CaO ${\cdot}7Al_2O_3$ (Cl2A7)-doped indium tin oxide (ITO) (ITO:Cl2A7 insulator and electride) thin films were deposited on glass substrates by an RF magnetron co-sputtering method with increasing number of insulating and conducting Cl2A7 target chips. The structural, electrical and optical properties of these films were investigated. The carrier concentration decreased and resistivity increased in the films with increasing number of Cl2A7 target chips. The optical transmittance of all of the thin films was above 80 % in the visible wavelength range. The structural property and surface roughness of the films were examined and the decrease of crystallinity and surface roughness was strongly dependent on the change of grain size.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.220.2-220.2
• /
• 2011

Biodiesel and biodiesel blend fuel are receiving increasing attention as alternative fuels for diesel engines without substantial modifications. Biodiesel fuels and blending have been widely studied and applied in diesel engine because of biodiesel's lower sulfur, lower aromatic hydrocarbon and higher oxygen content. Biodiesels have the potential to be oxidized in different condition. It has reported that oxidation deterioration of biodiesel is different in the condition of storage and oxidation causes chemical property change of methyl esters. Sunlight intensity, temperature, material of container and contact surface with oxygen are key dominant factors accelerating oxidation deterioration. In this study, we chose temperature among key oxidation conditions and metal container filled with biodiesel was heated at about $110^{\circ}C$ for 10 days in order to accelerate oxidation deterioration. To better understand the effect of biodiesel blends on emission, steady state tests were conducted on a heavy duty diesel engine. The engine was fueled with Ultra Low Sulphur Diesel(ULSD), a blend of 10% and 20%(BD10, BD20) on volumetric basis, equipped with a common rail direct injection system and turbocharger, lives up to the requirements of EURO 3. The experimental results show that the blend fuel of normal biodiesel with BD10 and BD20 increased NOx. The result of PM was similar to diesel fuel on BD10, but the result of PM on BD20 was increased about 63% more than its of diesel. The blend fuel of Oxidation biodiesel with BD10 and BD20 increased NOx as the results of normal biodiesel. But PM was all increased on BD10 and BD20. Especially THC was extremely increased when test fuel contains biodiesel about 140% more than its of diesel. Through this study, we knew that oxidation deterioration of biodiesel affects emission of diesel engine.

• Journal of Sericultural and Entomological Science
• /
• v.18 no.1
• /
• pp.27-39
• /
• 1976

In this study several kinds of spun silk yarn-synthetic filament compounded yarn was manufactured, and several fabrics woven from above mentioned silk compound yarn for evaluation of serviceability as clothing materials. The following results were obtained: 1. Degumming agents are in the order of sodium silicate, sodium hydroxide, sodium carbornate, soap and water. 2. When the concentration of sodium hydroxide is exceeded 3%, degradation of floss silk property is resulted because of excessive dissolving out of silk protein. 3. Degumming effect is much improved by concentration of degumming agent and less by its treating time. 4. Simultaneous application of more the 2 kinds of degumming agent is desirable for improvement of floss silk. 5. Application of natural organic acid brings very good results in keeping original scooping and color of the silk. 6. Load and elongation it increased by compound with synthetic filament yarn. 7. Even the evenness of compound yarn is largely dependent on the quality of floss silk and extent of degumming, the C.V.% of silk compound yarn in the experiment was 8-12%. 8. Single bath dyeing technique was impossible for their cloth, and dyeing was performed in 2 bath system separately for silk and synthetic fiber. 9. Shrinkage ratio due to the dyeing of fabric was 23% in case of polyester and spun silk fabric. 10. The final woven cloth can be applicable to (a) Blouse in care of thin cloth (compound silk fabric) (b) Korean costume for women in case of thick cloth. (compound hand spun silk fabric)

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.1
• /
• pp.66-73
• /
• 2017

In this work, graphene platelets were introduced into wax in an automotive electronic controlled thermostat for the purpose of enhancing its thermal-conductive property and improving response performance. Graphene content ranging from 10 % to 20% was added into and mixed with the wax to investigate the effect of graphene amounts on the performance of an automotive electronic controlled thermostat in terms of response time, hysteresis and melting temperature. The experimental results revealed that graphene in wax contributed to a reduction in the response time and hysteresis of an automotive electronic controlled thermostat. As a consequence, important improvement in thermal sensitivity, full lift, melting temperature and hysteresis were obtained. The thermal response of wax with graphene content of 20 % was improved by 25 %, as compared to that of wax with Cu content of 20 %. Hysteresis of wax with graphene was reduced by $0.6^{\circ}C$ as compared to that of wax with Cu content. The melting temperature of wax is lowered and hysteresis is also improved with increased graphene content of wax in an electronic controlled thermostat. We hope that this study can help further the transition of nano-fluid technology from small-scale research laboratories to industrial application in the automotive sector.

• Reproductive and Developmental Biology
• /
• v.33 no.2
• /
• pp.71-76
• /
• 2009

Salivary lipocalin (SAL1) is a member of the lipocalin protein family that has a property to associate with many lipophilic molecules. The importance of SAL1 during pregnancy in pigs has been suggested by our previous study which has shown that SAL1 is expressed in the uterine endometrium in a cell type- and implantation stage-specific manner and secreted into the uterine lumen. However, function of SAL1 in the uterus during pregnancy in pigs is not known. To understand SAL1 function in the uterus during pregnancy, we generated recombinant porcine SAL1 protein in an insect cell line. Porcine SAL1 cDNA was cloned into a baculovirus expression vector using RT-PCR and total RNA from uterine endometrium on day 12 of pregnancy, and the expression vector was used to generate recombinant Bacmid containing the SAL1 gene. The recombinant Bacmid was then transfected Sf9 cell to produce recombinant baculovirus. By infecting Sf9 cell with recombinant baculovirus, we established a SAL1-expressing insect cell expression system. Immunoblot analysis confirmed SAL1 expression in the infected cells. Recombinant SAL1 produced by the Sf9 cell line will be useful for understanding physiological function of SAL1 during pregnancy in pigs.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.3
• /
• pp.530-539
• /
• 2016

Bacterial light-oxygen-voltage-sensing photoreceptor-derived flavin mononucleotide (FMN)-based fluorescent proteins act as a promising distinct class of fluorescent proteins utilized for various biomedical and biotechnological applications. The key property of its independency towards oxygen for its chromophore maturation has greatly helped this protein to outperform the other fluorescent proteins such as GFP and DsRed for anaerobic applications. Here, we describe the feasibility of FMN-containing fluorescent protein FbFP as a metal-sensing probe by measuring the fluorescence emission changes of a protein with respect to the concentration of metal ions. In the present study, we demonstrated the mercury-sensing ability of FbFP protein and the possible amino acids responsible for metal binding. A ratiometric approach was employed here in order to exploit the fluorescence changes observed at two different emission maxima with respect to Hg²⁺ at micromolar concentration. The engineered variant FbFP_C56I showed high sensitivity towards Hg²⁺ and followed a good linear relationship from 0.1 to 3 μM of Hg²⁺. Thus, further engineering with a rational approach would enable the FbFP to be developed as a novel and highly selective and sensitive biosensor for other toxic heavy metal ions as well.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.4
• /
• pp.347-352
• /
• 2013

Four types of electrolyte were tested for the application as an electrolyte in the Zn-Br redox flow battery. Electrolyte was consist of $ZnBr_2$ (electrolyte number 1), $ZnBr_2+KCl$ (electrolyte number 2), $ZnBr_2+KCl+NH_4Br$ (electrolyte number 3) and $ZnBr_2+KCl+EMPBr(C_7H_{16}BF_4N)$ (electrolyte number 4). The each electrolyte property was measured by CV (cyclic voltammetry) method. The different between the potential of anodic and cathodic maximum current density in a CV experiment (${\Delta}E_P$) was 0.89V, 0.89V, 1.06V and 0.61V for the electrolyte number 1, 2, 3 and 4, respectively. The electrolyte involved KCl increased conductivity which was appeared by anodic and cathodic maximum current density in a CV experiment. It was estimated that the electrolyte of number 3 ($ZnBr_2+KCl+NH_4Br$) and number 4 ($ZnBr_2+KCl+EMPBr$) could be suitable as an electrolyte in the Zn-Br redox flow battery with non-appeared bubble, non-Br formation and high anodic-cathodic maximum current density.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.300-300
• /
• 2008

In this study, the advanced DuoPIGatron-type ion beam (IB) system was applied to inorganic thin film for aligning liquid crystal (LC). LC alignment on $Ta_2O_5$ via IB irradiation was embodied. As a result of IB irradiation, the homogeneously aligned liquid crystal display (LCD) on $Ta_2O_5$ was observed with low pretilt angles. The $Ta_2O_5$ were deposited on indium-tin-oxide coated Coming 1737 glass substrates by rf magnetron sputtering at $200^{\circ}C$. The deposition process resulted in forming very uniform thin film on glass substrates without any defects. To confirm the application of the inorganic alignment on modem display optical devices, we fabricated twisted nematic LCD and measured optical property and response time. As a result of the experiment, the electro optical characteristics of the LCD fabricated by using IB irradiation on $Ta_2O_5$ alignment layer were similar with the other LCD fabricated by using rubbing process.