• 대한안전경영과학회지
• /
• 제4권4호
• /
• pp.137-146
• /
• 2002

In order to investigate the effect of irradiation by $^{60}Co-\gamma$rays as well as the e thermal treatment on the dielectric deterioration in ethylene propylene rubber, insulating material for electric cables used in atomic power plants, charging discharging current, residual built- up voltage and dielectric properties are measu discussed in this study. Variance in the characteristic of relative dielectric constant as a function of tem was observed in relatively high dose of irradiation. Since glass transition tem appeared at tens of degree Celsius below zero, the characteristic is attributed orientation polarization. Dielectric loss is generally increased, with increasing d irradiation in the characteristic of dielectric loss as a function of temperature, No d loss by thermal treatment was observed. Dielectric resistance decreases with increa of irradiation in the characteristic of charging current as a function of temperature be considered that dielectric resistance seems to be recovered by thermal treatm characteristic of discharging current as a function of time in the specimen less ir become similar to that of the unirradiated, when thermal treated. A peak is shown residual built- up voltage as a function of time, and the corresponding time of the shorten as increasing dose of irradiation. It is also observed that the corresponding the peak is lengthened by thermal treatment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1771-1773
• /
• 1999

Ferroelectric PZT(10/90)/(90/10)heterolayered thin films were fabricated by the alkoxide-based Sol-Gel method Electric and dielectric properties of PZT(10/90)/(90/10) heterolayered thin films have been investigated, focusing on the effect of PZT/PZT and PZT/electrode interface on the heterolayered films. Dielectric constant increased with increasing the number of coatings. Increasing the number of coatings, remanent polarization and coercive field were decreased and the values of the PZT-6 heterolayered thin films deposited on Pt/Ti/$SiO_2$/Si were $7.18{\mu}C/cm$, $68.5kV/cm^2$, respectively. Leakage current, densities were increased with increasing the number of coatings, and the value of the PZT-4 film deposited on the Pt/Ti/$SiO_2$/Si substrate was about $7{\times}10^{-8}A/cm^2$ at 0.05MV/cm.

• 한국전기전자재료학회논문지
• /
• 제14권7호
• /
• pp.562-566
• /
• 2001

The effects of MnO$_2$ addition on the properties in Pb(Mg$_{1}$3/Nb$_{2}$3/)O$_3$ relaxor ferroelectrics were studied in the phase transition temperature range from -4$0^{\circ}C$ to 11$0^{\circ}C$. Specimens were made via solid state processing method. Dielectric properties, piezoelctric properties, electric-field-induced strain were examined to clarify the effect of MnO$_2$ addition in 0.9MN-0.1PT. As the amount of MnO$_2$ increases, the maximum dielectric constant and the dielectric loss decreases. Q$_{m}$ increased by increasing the doping contents of Mn. When 0.5wt% MnO$_2$ was doped, Q$_{m}$ increased from 95 to 480. The electric-filed-induced strain and polarization decreases as the amount of MnO$_2$ increases. From the experimental results, it was suggested that Mn behaves as an ferroelectric domain pinning element.ent.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.395-397
• /
• 2002

Dielectric thin films of Pb$\_$0.72/La$\_$0.28/Ti$\_$0.93/O$_3$(PLT(28)) have been deposited on Pt(111)/Ti/SiO$_2$/Si(100) substrates in-situ by pulsed laser deposition using different annealing and deposition processes. We have investigated the effect of hydrogen annealing on the ferroelectric properties of PLT thin films and found that the annealing process causes the diffusion of hydrogen into the ferroelectric film resulting in the destruction of polarization. Two-step process to grow PLT films was adopted and verified to be useful to enlarge the grain size of the film. Structural properties including dielectric constant, and ferroelectric characteristics of PLT thin films were shown to be strongly influenced by grain size. The film deposited by using two-step process including pre-annealing treatment has a strong (111) orientation. However, the films deposited by using single-step process with hydrogen annealing process shows the smallest grain size.

• 산업기술연구
• /
• 제25권A호
• /
• pp.157-162
• /
• 2005

In this study, the fabrication of PZT films was performed from a multilayer structure comprising $TiO_2$, $ZrO_2$ and PbO thin films prepared by rapid themal chemical vapor deposition(RTMOCVD). $TiO_2$, $ZrO_2$ and PbO are the component layers of oxide multilayer system for a single phase PZT thin film. The composition control of PZT thin film was done by the thickness control of individual component layer. The composition ratio of Pb:Ti:Zr with thickness were 1:0.94:0.55. Occurrence of a single-phase of PZT was initiated at around $550^{\circ}C$ and almost completed at $750^{\circ}C$ under the fixed time of 1hr. As the concentration of Pb increased, the roughness and crystallization in the film increased. From the as result of using XPS and TEM, the single phase formation through annealing is evident. The electrical properites of the prepared PZT thin film(Zr/Ti=40/60, 300 nm) on a Pt-coated substrate were as follow: dielectric constant ${\varepsilon}_r=475$, coercive field Ec=320 kV/cm, and remanant polarization $P_r=11{\mu}C/cm^2$ at an applied voltage of 18 V.

• 한국전기전자재료학회논문지
• /
• 제24권11호
• /
• pp.895-899
• /
• 2011

Multiferroic BFO/PZT(5/95) multilayer films were fabricated by spin-coating method on the Pt/Ti/$SiO_2$/Si substrate alternately using BFO and PZT(9/95) alkoxide solutions. The structural and dielectric properties were investigated with variation of the solvent and the number of coatings. All films showed the typical XRD patterns of the perovskite polycrystalline structure without presence of the second phase such as $Bi_2Fe_4O_3$. BFO/PZT multilayer thin films showed the typical dielectric relaxation properties with increase an applied frequency. The average thickness of 6-coated BFO/PZT multilayer film was about 600 nm. The dielectric properties such as dielectric constant, dielectric loss and remnant polarization were superior to those of single composition BFO film, and those values for BFO/PZT multilayer film were 1199, 0.23% and 12 ${\mu}C/cm^2$.

• Corrosion Science and Technology
• /
• 제2권1호
• /
• pp.7-11
• /
• 2003

Photoelectrochemical response and electrochemical impedance behavior was investigated for passive film formed on sputter-deposited Cr alloy in $0.1kmol{\cdot}m^{-3}$. Photoelectrochemical action spectrum could be separated into two components, which were considered to be derived from $Cr_2O_3$ ($E_g\sim3.6eV$) and $ Cr(OH)_3 $ ($E_g\sim2.5eV$). The band gap energy, $E_g$, of each component was almost constant for various applied potentials. polarization periods and alloying additives. The photoelectrochemical response showed negative photo current for most potentials in the passive region. Therefore, the photo current apparently exhibited p-typesemiconductor behavior. On the other hand, Mort-Schottky plot of the capacitance showed positive slope, which means that passive film formed on Cr alloy has n-type semiconductor property. These apparently conflicting results are rationally explained assuming that the passive film on Cr alloy formed in the acid solution has n-type semiconductor property with a fairly deep donor level in the band gap and forms an accumulation layer in the most of potential region in the passive state.

• 한국세라믹학회지
• /
• 제45권3호
• /
• pp.139-141
• /
• 2008

The piezoelectric properties of tetragonal 0.88Pb$(Zn_{1/3}Nb_{2/3)O_3-0.12PbTiO_3$ single crystals are characterized along the <111> direction, which composed the engineering domain configuration in the tetragonal phase. The <111>-oriented crystal possessed smaller $d_{33}$ values compared to the crystal along the <001> spontaneous polarization direction. Based on phenomenological theory, it is shown that the engineering domain configuration does not enhance the piezoelectric constant in tetragonal 0.88Pb$(Zn_{1/3}Nb_{2/3)O_3-0.12PbTiO_3$ single crystals. In addition, the electrostrictive coefficients of $Q_{12}=-0.03706m^4/C^2,\;Q_{11}=0.10765m^4/C^2,\;and\;Q_{44}=0.02020m^4/C^2$ of tetragonal 0.88PZN-0.12PT single crystals were calculated.

• 한국수산과학회지
• /
• 제16권3호
• /
• pp.239-245
• /
• 1983

Electrochemical adsorption always was accompanied with solvent displacement and relative size factor(x) of adsorbate and solvent and hydrogen coverage(${\theta}$) on the lead anodic film electrode formed in phosphoric acid in NaCl solution and the sea water at $15{\sim}35^{\circ}C$ were studied by means of constant current-potential method and potentiodynamic cathodic polarization method. In this experiment, various constants and thermodynamic quantities calculated from the hydrogen coverage were also described to explain the reactivities of di-iso-butylnitrosoamine(DBNA) and proton ($H^+$) according to the changes of interactions between solute and solvent in the bulk phase and interphase. It was investigated that the average values of relative size factor and the coverage of hydrogen atoms studied with the electrode of lead anodic film formed in phosphoric acid solution in 60mM DBNA+0.5M NaCl and in 60mM DBNA+$6\%0$ sea water were about 11.0 and 0.2 respectively. Hydrogen evolution was electrochemical mechanism because of substitutional adsorption of aromatic substance with their delocalization of electrons, but in the case of non-charge transfer adsorption of aliphatic substance(DBNA) interacting relatively little with the electrode, it was combination mechanism.

• 한국분말재료학회지
• /
• 제25권5호
• /
• pp.375-378
• /
• 2018

Conductive and dielectric SiC are fabricated using electroless plating of Ni-Fe films on SiC chopped fibers to obtain lightweight and high-strength microwave absorbers. The electroless plating of Ni-Fe films is achieved using a two-step process of surface sensitizing and metal plating. The complex permeability and permittivity are measured for the composite specimens with the metalized SiC chopped fibers dispersed in a silicone rubber matrix. The original non-coated SiC fibers exhibit considerable dielectric losses. The complex permeability spectrum does not change significantly with the Ni-Fe coating. Moreover, dielectric constant is sensitively increased with Ni-Fe coating, owing to the increase of the space charge polarization. The improvements in absorption capability (lower reflection loss and small matching thickness) are evident with Ni-Fe coating on SiC fibers. For the composite SiC fibers coated with Ni-Fe thin films, a -35 dB reflection loss is predicted at 7.6 GHz with a matching thickness of 4 mm.