• Journal of Welding and Joining
• /
• 제18권3호
• /
• pp.97-105
• /
• 2000

The stress corrosion cracking(SCC) and hydrogen embrittlement cracking(HEC) characteristics of a weathering steel weldment were investigated in aerated acid-chloride solution. The electrochemical properties of weldment were investigated by polarization test and galvanic corrosion test. Weathering steel did not show passive behavior in the acid-chloride solution. Galvanic corrosion between the weld metal and the base metal was not observed because the base metal was anodic to the weld metal. The slow-strain-rate tests(SSRT0 were conducted at a constant strain rate o 7.87×{TEX}$10^{-7}${/TEX}/s at corrosion potential, and at potentiostatically controlled anodic and cathodic potentials. The weldment of weathering steel was susceptible to both anodic dissolution SCC and hydrogen evolution HEC.

• Journal of the Optical Society of Korea
• /
• 제15권3호
• /
• pp.232-236
• /
• 2011

We analyze the linear equalizers used in optically amplified on-off-keyed (OOK) systems to combat chromatic dispersion (CD) and polarization mode dispersion (PMD), and we derive the mathematical minimum mean squared error (MMSE) performance of these equalizers. Currently, the MMSE linear equalizer for optical OOK systems is obtained by simulations using adaptive approaches such as least mean squared (LMS) or constant modulus algorithm (CMA), but no theoretical studies on the optimal solutions for these equalizers have been performed. We model the optical OOK systems as square-law nonlinear channels and compute the MMSE equalizer coefficients directly from the estimated optical channel, signal power, and optical noise variance. The accuracy of the calculated MMSE equalizer coefficients and MMSE performance has been verified by simulations using adaptive algorithms.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.997-1000
• /
• 2001

Pb(Zr$\sub$0.52/Ti$\sub$0.48/)O$_3$(PZT) thin films have been prepared by rf-magnetron sputtering methods and investigated the structural and electrical properties. In order to investigate the effects of sputtering conditions, input power was controlled during deposition. Crystallization process and microstructure of PZT thin films were largely affected by input power. Highly crystallized PZT films with the perovskite structure were successfully obtained on Pt/Ti bottom electrode. The dielectric constants and polarization of PZT thin films were increased with increasing input power, and the coercive electric field was decreased with increasing input power . The dielectric constant of PZT thin films with input power 150 W was 966 at 1 kHz. we, authors, proposed that preferred orientation of PZT thin films were controlled by input power in sputtering methods.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.217-221
• /
• 1997

We have investigated the ferroelectric properties of multi-layered SrBi$_2$Ta$_2$$O_{9}$Pb(Zr,Ti)O$_3$, SBT/PZT, thin film capacitors. Specimens were prepared onto Pt-coated Si wafer by sol-gel method. Ferroelectric properties of these finns could be obtained only for thin SBT layers below 50nm in thickness. The values of dielectric constant and remnant polarization depend mainly on the thickness of SBT layer, which arises from the paraelectric interface layer between SBT and PZT due to the thermal diffusion of Pb. The value of remnant poarization of PZT/SBT is greater than that of SBT, and the plarization fatigue behaviors of PZT/SBT/Pt capacitors are somewhat improved as compared with those of PZT/Pt.t.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.83-86
• /
• 1998

Ferroelectric PZT(40/67)/PZT(60/40)heterolayered thin films were Prepared by the alkoxide-based Sol-Gel method. PZT(40/60) and PZT(60/40) stock solutions were made and spin-coated on the P7Ti/Si02/Si substrate alternately. These PZT(40/60) and PZT(60/40) films were dried at 300$^{\circ}C$ for 30min to remove organic materials and were sintered at 650$^{\circ}C$ for 1 hour to crystalize into a perovskite structure. The coating and heating procedure were repeated 6 times to form heterolayered films. Increasing the number of coating, coercive field was decreased. The relative dielectric constant, loss, remanent polarization and coercive field of the 4-coated PZT heterolayered were 1200, 4.1[%], 30.794[${\mu}$C/㎡] and 147.22[kV/cm], respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.526-529
• /
• 2008

The effect of air impurities on PEMFC performances were studied using electrochemical analysis, such as OCV monitoring, polarization, constant current operation, and electrochemical impedance spectroscopy. The nitrogen dioxide in air lowered the operation voltage at 1 A/$cm^2$ by 160 mV (10 ppm) and 227 mV (100 ppm), while the carbon monoxide effect was relatively not significant (30 mV at 100 ppm). For both nitrogen dioxide and carbon monoxide, the performances were largely recovered when pure air was provided again. Further study for additional air impurities and simulated air are under progress to provide fundamental data for the design of fuel cell vehicles.

• 한국전기전자재료학회논문지
• /
• 제11권2호
• /
• pp.128-132
• /
• 1998

2/65/35 PLZT stock solution prepared by Sol-Gel processing was spin-coated on ITO coated glass and annealed by RTA(Rapid Thermal Annealing). The crystal structure of films was reported based on the observation of crystallization process and microstructure of the film fabricated at different fabrication condition. Films were crystallized into rhombohedral structure by annealing at $750^{\circ}C$ for 5 min. As the annealing temperature increased, the size of rosette structure of the films was grown up from $2.4{\mu}m$ to $15{\mu}m$, dielectric constant was increased, coercive field was decreased 33.82 kV/cm, remnant polarization was increased to 39.84 ${\mu}C/cm^2$ and Optical transmittance was decreased.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.11-12
• /
• 2005

[ $Pb(Zr_{0.48}Ti_{0.52})O_3$ ] (PZT) thin films were deposited on Pt(111)/Ti/$SiO_2$/Si substrates by pulsed laser deposition. In order to study the effect of different laser pulse repetition rate on the dielectric and ferroelectric properties of PZT thin films,2 Hz and 5 Hz of laser pulse repetition rate were selected. We compared the results of XRD pattern, dielectric constant and hysteresis characteristics. From the experimental data, we found that the electrical properties of PZT thin films which grown ar 2 Hz of laser pulse repetition rate were better than those which grown at 5 Hz of laser pulse repetition rate.

• Applied Science and Convergence Technology
• /
• 제24권6호
• /
• pp.215-218
• /
• 2015

A pyroelctric properties of Ni(x)-doped PMNT systems were analyzed. Modified PMNT samples were prepared using the columbite structure method. Pyroelectric current, polarization, dielectric constant and dissipation factor of Ni-doped PMNT samples were measured as a function of temperature. By adding a small amount of NiO, pyroelectricity of PMNT is increased. Unlike the normal $ABO_3$ ferroelectric, Ni-doped PMNT showed properties for relaxor ferroelectric of causing the successive phase transition over a wide temperature. The optimum conditions for obtaining compositions with improvement ferroelectric properties are a nominal addition of 0.02 mole% Ni. Also, Ni-doped PMNT ferroelectric showed excellent pyroelectric figures of merit in the vicinity of room temperature. The pyroelectric coefficient ($0.00524C/m^2K$ at $25^{\circ}C$) and figures of merit ($F_v{\sim}0.039m^2/C$ and $F_d{\sim}0.664{\times}10^{-4}Pa^{-1/2}$) of composition PMNT with 0.02 mole% Ni are comparable to the earlier reports on lead-type pyroelectrics.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.397-400
• /
• 1996

We investigated electric and dielectric properties of MIM device using Maleate Copolymer LB films. The thickness of maleate copolymer LB film by ellipsometry measurements and X-ray diffraction pattern was about 27~30[ ]. The maleate copolymer 13 film have the property of insulator like organic ultra-thin film. The electric conduction was Schottky current measured by I-V characteristics, and the conductivity was 10$^{-15}$ ~10$^{-14}$ [S/cm]. Dielectric constant was about 5.0~6.0 by various measurement: I-V, frequency-depenent dielectric properties. Schottky barrier was about 0.9 ~1.0(eV). By relation between log I and 1/T, activation energy baa 0.74(eV). Frequency-depenent dielectric properties wart orientational polarization by the dipole.