• 제목/요약/키워드: the methods of connection

검색결과 1,367건 처리시간 0.023초

내부연결 임플란트의 보철 수복 후 성공률에 미치는 위험요소에 관한 10년간의 후향적 연구 (A 10-year retrospective study on the risk factors affecting the success rate of internal connection implants after prosthetic restoration)

  • 이서인;김민정
    • 대한치과보철학회지
    • /
    • 제61권2호
    • /
    • pp.113-124
    • /
    • 2023
  • 목적: 본 연구의 목적은 임플란트 보철물의 종류 및 특성과 생존율 분석을 통해 성공률을 높이는데 도움이 되는 데에 있다. 대상 및 방법: 원광대학교 치과대학 산본치과병원에서 2011~2020년에 식립한 임플란트 중 한 명의 보철전문의에 의해 수복된 사례에 대하여 그 특성과 실패에 대한 상관관계 등을 조사하였다. 실패의 원인은 골유착 실패, 임플란트주위염, 고정체 파절, 지대주 파절, 나사 파절, 나사 풀림, 보철물 파절, 보철물 유지력 상실 등으로 분류했다. 보철방식, 캔틸레버 여부, 식립 위치 등과 임플란트 실패와의 연관성을 분석했다. 결과 분석은 SPSS ver 25.0 (IBM, Chicago, IL, USA)을 이용하여 Chi-square test, Kaplan-Meier 생존분석 등을 통하여 도출했다. 결과: 총 2587개의 임플란트가 식립되었으며, 그 중 1141개의 임플란트가 단일관(Single Crown)으로, 1446개의 임플란트가 고정성 국소의치(Fixed Partial Denture)로 수복되었고 누적생존율은 88.1%이었다. SC의 성공률은 86.2% (984개), FPD의 성공률은 89.6% (1295개)로 통계적으로 유의한 차이를 보였으며 그 중 유의한 차이가 있었던 요인은 지대주 파절, 나사 파절, 나사 풀림 등이었다 (P < .05). 결론: 10년간의 추적조사 결과 생물학적인 요인보다는 생역학적인 요인으로 인한 실패가 더 많이 발생했고 임플란트의 성공률은 보철방식 별로 상이했으며 영향을 미치는 요인도 상이했다. 추후 임플란트의 성공에 관한 추가적인 연구가 더 필요할 것이다.

Chemical and bioactive comparison of flowers of Panax ginseng Meyer, Panax quinquefolius L., and Panax notoginseng Burk.

  • Li, Fang;Lv, Chongning;Li, Qiao;Wang, Jing;Song, Dan;Liu, Pengpeng;Zhang, Dandan;Lu, Jincai
    • Journal of Ginseng Research
    • /
    • 제41권4호
    • /
    • pp.487-495
    • /
    • 2017
  • Background: Although flowers of Panax ginseng Meyer (FPG), Panax quinquefolius L. (FPQ), and Panax notoginseng Burk. (FPN) have been historically used as both medicine and food, each is used differently in practice. Methods: To investigate the connection between components and enhancing immunity activity of FPG, FPQ, and FPN, a method based on a rapid LC coupled with quadrupole time-of-flight MS and immunomodulatory activity study evaluated by a carbon clearance test were combined. Results: According to quantitative results, the ratio of the total content of protopanaxatiol-type ginsenosides to protopanaxadiol-type ginsenosides in FPN was 0, but ranged from 1.10 to 1.32 and from 0.23 to 0.35 in FPG and FPQ, respectively. The ratio of the total content of neutral ginsenosides to the corresponding malonyl-ginsenosides in FPN ($5.52{\pm}1.33%$) was higher than FPG ($3.2{\pm}0.64%$) and FPQ ($2.39{\pm}0.57%$). The colorimetric analysis showed the content of total ginsenosides in FPQ, FPG, and FPN to be $13.75{\pm}0.60%$, $17.45{\pm}0.42%$, and $12.45{\pm}1.77%$, respectively. The carbon clearance assay indicated that the phagocytic activity of FPG and FPQ was higher than that of FPN. A clear discrimination among FPG, FPQ, and FPN was observed in the principal component analysis score plots. Seven compounds were confirmed to contribute strongly by loading plots, which may be the cause of differences in efficacy. Conclusion: This study provides basic information about the chemical and bioactive comparison of FPG, FPQ, and FPN, indicating that protopanaxtriol-type ginsenosides and malonyl-ginsenosides may play a key role in their enhancing immunity properties.

광섬유 기반 스마트 포토닉 스포츠 의류의 모듈화 디자인 연구 (A study on the modular design of smart photonic sports clothing based on optical fiber technology)

  • 박수진;박선형;이주현
    • 감성과학
    • /
    • 제12권4호
    • /
    • pp.393-402
    • /
    • 2009
  • 본 연구의 목적은 스마트 포토닉 의류와 관련된 다양한 기술 중 광섬유 발광 기능 의류 기술을 기반으로 하여, 스마트 포토닉 스포츠 의류를 위한 모듈화 디자인의 체계적인 방안을 모색하고, 인체 치수를 기반으로 한 광섬유-발광 모듈 조합에 따른 다양한 모듈화 디자인 모형을 제시하는데 있다. 이를 위하여 본 연구에서는 모듈화의 디자인 요건을 살펴보았고, 광섬유-발광 모듈의 크기와 부착 위치를 선정함에 있어서는 모듈화와 인체 치수와의 밀접한 연관성을 고려하여 연구를 진행하였다. 인체 치수와 더불어 컴퓨팅 기기의 적합한 부착 위치와 인체의 동작에 영향을 덜 받는 인체 부위를 종합적으로 고려하여 최종적으로 광섬유-발광 모듈을 부착하기에 적합한 인체상의 부위를 도출하였고, 이를 부위별 실측 치수와 함께 제시하였다. 이를 토대로 스마트 포토닉 의류의 3대 기능 중 스포츠 의류에 가장 필요하면서 적합하다고 판단되는 착용자 안전보호 기능을 중심으로, 스마트 포토닉 기능의 스포츠 의류 상의 재킷(jacket)의 모듈화 모형을 설계하여 제시하였다.

  • PDF

수요기반 물류인증을 통한 물류산업 활성화 방안 (A Policy Proposal for Development of Logistics Certification System based on Needs with a Device for Vitalizing Logistic Industry)

  • 오재영;문종근;이진용
    • 한국포장학회지
    • /
    • 제21권1호
    • /
    • pp.11-17
    • /
    • 2015
  • 글로벌 산업화 및 경제성장으로 국내외 교역량이 증가함에 따라 국가 물류비 부담이 지속적으로 상승되면서, 선진국이나 글로벌 선진기업의 경우와 마찬가지로 국내에서도 이러한 국가물류비 감소를 통한 산업 경쟁력 제고를 위해 다양한 물류 효율화를 시도해 왔다. 특히 2000년대 초반 유닛로드시스템(Unit Load System)을 도입을 통해 T11($1100{\times}1100mm$)의 표준파렛트를 설정하였고, 이를 기준으로 포장 모듈 및 물류 설비가 정합성을 유지하도록 물류설비인증제도를 시행함으로써 물류표준화 확산과 동시에 3자 물류의 확산을 통한 물류효율화가 진행되면서 국가물류비 절감에 상당부분 기여해왔으나, 최근 인증수요의 감소와 함께 GDP 대비 국가물류비 비율에서 아직 선진국과 약 3%정도 격차를 보이고 있다. 따라서, 본 연구에서는 국내 물류분야 인증제도에 대한 현황 및 실효성 분석을 통해 국가 물류 효율화 및 선진화와 동시에 물류산업 활성화를 위한 정책적 전략으로서의 물류인증 활성화 방안으로 인증 수요자의 니즈를 충족하는 수요기반의 물류인증제도 도입을 제안하였다. 즉, 동북아 교역량의 증가에 대응한 순환물류시스템(Returnable Transport System) 도입 필요성을 반영한 '동북아 물류설비 인증' 개발과 전자 상거래의 초국경적 글로벌 유통에 따른 '안전운송 인증'과 같은 수요기반의 인증 도입을 통해 물류산업 지원과 활성화에 기여할 것으로 기대된다.

  • PDF

객체기반 CAD 시스템의 건축설계적 효용에 관한 연구 (A Study on the Architectural Design Utility of Object-based CAD System)

  • 유창균
    • 한국디지털건축인테리어학회논문집
    • /
    • 제2권1호
    • /
    • pp.9-15
    • /
    • 2002
  • As architectural forms tend to be large-scaled, high-storied and complicated, use of computer for processing design information has been generalized. However, CAD use in the process of developing architectural design has been neglected greatly in the educational field of architectural field due to the surging of recognition that it may limit the essential property of architectural design. It may be resulted from the limitation of CAD system, that is, it is because of tardy speed of application development for the related areas with the lack of simplicity and clarity of flexibility to be secured on the drawing and user interface. Recent CAD systems, however, overcome such a limitation, convert into object-based design from entity-based drawing, drafting and modeling for implementing design concept of architects and it connects with internet linked to superspeed information communication network and changes process and stream of architectural design. Therefore, this study deals with utility of object based CAD system with products of Autodesk Co. and consequently obtain the following conclusions. First, it expands architect's design areas by supporting cooperative design system based on model-based architectural design and internet. Second, it reduces consumption of personal and material resources and time in the process of drawing production for improving architectural design works. Third, it can reduce the frequent design changes by improving understanding of architectural space with visualization of immediate 3D information, escaping from traditional methods to deliver design information to building owner through 2D drawing or model and perspective drawing requiring much cost and time. Fourth, it keeps exactness without omission or duplication of design information and generate and renew information of all related drawings on a drawing. Fifth, it is possible to change difficult and boring architectural design work into a pleasure owing to immediate modeling and drawing of design idea. In addition, digital drawing generated by using object-based CAD system can playa role of establishing Urban Information System to be used for protecting from building in disaster and urban disasters in connection with GIS numerical map and be used for reference of all kinds of information required fro post-management of buildings. However, what is more important is that surplus time from introduction of object-based CAD system should be used for consideration to be recognized as a good space and building built as a product of this project for comfort to urban people.

  • PDF

족부와 족관절에서의 신경내 결절종 (Intraneural Ganglion Cyst in Foot and Ankle)

  • 최장석;김광희;곽지훈;박홍기;이신우
    • 대한족부족관절학회지
    • /
    • 제15권4호
    • /
    • pp.223-231
    • /
    • 2011
  • Purpose: Pathogenesis of intraneural ganglion is controversial, however, the synovial theory that the intraarticular region is the origination of disease has come into the spotlight nowadays. But there are a few researches about intraneural ganglion in foot and ankle. We studied 7cases of intraneural ganglion. We are going to prove the synovial theory by indentifying articular branch of intraneural ganglion. Materials and Methods: From August 2003 to May 2011, we evaluated 7 ouf of 8 patients diagnosed as a intraneural ganglion in foot and ankle. The gender ratio were 4 male and 3 female, and the mean age at the time of surgery was 52.9 years. Clinically, we checked pre and post operative symptom, muscle tone and whether loss of muscle tone and sensation exists. We analyzed surgical records and preoperative MRI and compared those with intra-operative finding. Results: In MRI analysis of 7cases, the connection around the joints were confirmed, and 1 case was confirmed in the retrospective analysis of MRI. Intraneural ganglions occurred in medial plantar nerve 3 cases, lateral plantar nerve 1 case, superficial peroneal nerve 1 case and sural nerve 1 case. We could not found recurrence during the follow up periods. Most patients relieved pain after operation, but recovery of sensation was unsatisfactory. We could find some cases pathological finding of the nerve intraoperatively, and clinical result of that cases was poor. Conclusion: Intraneural ganglion can occur in various parts in foot and ankle. We concluded that the intranneural ganglion originated from joint by identifying the artichlar branch of ganglion. Due to its small size, it is difficult to find articular branch in operation field. But we do our best to find and remove articular branch. Currently, considering the small amount of research in foot and ankle, more research about articular brach is needed.

자세이상과 관련된 국내 연구동향 분석 -시상면상의 척추 정렬 이상을 중심으로- (Research Trends of Abnormal Postures in Korean Literature -Based on Abnormal Spinal Alignment in the Sagittal Plane-)

  • 박정식;임형호;송윤경;고연석;이정한;정원석;신병철;고호연;선승호;전찬용;장보형;고성규
    • 한방재활의학과학회지
    • /
    • 제23권4호
    • /
    • pp.117-128
    • /
    • 2013
  • Objectives The purpose of this study is analyzing internal research trends of abnormal postures and providing problems of researches forward. Methods 6 Korean databases were searched for articles of abnormal postures, irrespective of publication year and 30 research were systematically reviewed. An analytical method such as descriptive statistics and an acutal number and percentage was used. Results We collected 30 studies. 16 studies were published within the last four years. 2012 saw 7 studies, the highest number of studies. Clinical research is the major research method. 26 studies were clinical research. The studies can be categorized according to the characteristic of the research content such as research of related factors or physical characteristics, research of treatment or programs, etc. 16 studies were about research of treatment or programs, the most number of studies. 11 studies were about research of related factors or physical characteristics, and 3 studies were about other issues. Conclusions Since the connection among postural abnormality, pain, and musculoskeletal system disorder has been raising, it is important to conduct a continued, methodical study.

교수·학습자료용 기록정보콘텐츠의 구조에 관한 연구 -영국 TNA와 미국 NARA를 중심으로 (A Study on structures of Archival Contents for Teaching-Learning Materials-Focusing on the TNA of UK and the NARA of USA)

  • 이은영
    • 기록학연구
    • /
    • 제28호
    • /
    • pp.83-121
    • /
    • 2011
  • 해외 보존기록관리기관이 홈페이지에서 제공하는 '교사와 학생'을 대상으로 하는 교육용 프로그램 서비스는 이제 주요 서비스 메뉴이다. 국내의 여러 선행연구에선 해외의 교육용 프로그램 서비스 사례를 앞 다투어 소개하고 벤치마킹의 필요성을 주장하여 왔지만, 관련 프로그램의 소개 수준에 그치면서 심층적인 사례 분석은 미흡한 감이 없지 않았다. 이에 본 논문은 보다 심층적인 사례 분석을 통하여 교수 학습자료용 기록정보콘텐츠의 내용 구성 및 구조적 특징을 조명하는 것이 필요하다는 인식에서 출발하였다. 먼저, 영국 TNA의 교육 사이트를 개괄하고, 주요한 교수 학습자료용 콘텐츠인 '토픽' 메뉴에서 '냉전' 콘텐츠를 샘플로 선택하여 그 내용 구성 및 구조적 특징을 분석하였다. 미국 NARA의 경우도 교육 사이트를 개괄하고 주요한 콘텐츠인 '기록 수업' 메뉴의 '매카시' 콘텐츠의 내용 구성 및 구조적 특징을 분석하여 일반화하고자 하였다. 해외의 교수 학습자료용 기록정보콘텐츠의 구조를 심층 분석한 결과, 다음과 같은 시사점을 얻을 수 있었다. 첫째, 교과서와 같은 일관성 있는 내용 구성 체제로 개발되어야 한다. 둘째, 일차 사료를 원활하게 해독할 수 있는 서비스를 제공해야 한다. 셋째, 비용 문제를 고려하여 기록정보콘텐츠를 학령별, 교과 간에 연계 활용 할 수 있는 방식으로 개발해야 한다. 넷째, 일차 사료 선별 시 텍스트가 포함된 문서 사료를 우선으로 선별한다. 다섯째, 교수 학습자료용 기록정보콘텐츠는 반드시 교육 과정과 연계해서 개발하여 국가적 차원에서 활용을 촉진하도록 한다.

LKB1/AMPK 신호 전달 경로의 활성화로 인한 새싹율무 열수 추출물의 항비만 효과 (Coix lacryma-jobi var. mayuen Stapf Sprout Extract Ameliorates High-Fat Diet-Induced Obesity by Upregulating LKB1/AMPK Signaling)

  • 김민주;이정훈;최정원;박해진;신미래;노성수
    • 대한본초학회지
    • /
    • 제36권6호
    • /
    • pp.39-46
    • /
    • 2021
  • Objectives : AMP-activated protein kinase (AMPK) is a key metabolic regulator that reduces lipogenesis. AMPK is mainly activated via phosphorylation of liver kinase B (LKB) 1 under energy stress. Here, we highlighted the anti-obesity effect and underlying mechanism of Coix lacryma-jobi var. mayuen Stapf sprout water extract (CSW) sprout extract in connection with the LKB1/AMPK signaling pathway. Methods : C57BL/6 mice (20~25 g) fed HFD to induce obesity and at the same time administered CSW 100 mg/kg (CSWL; (CSWL; CSW low concentration) or CSW 200 mg/kg (CSWH; CSW high concentration) or Garcinia extract (Garcinia) 200 mg/kg orally for 6 weeks. Body weight and food intake were measured at the same time each day. After 6 weeks of CSW administration, liver tissue and serum were obtained through an autopsy. After the end of the experiment, biochemical analysis (triglycerides (TG), total cholesterol (TC), HDL-cholesterol, and LDL-cholesterol) was performed on the serum. And then, protein levels related to TG and TC synthesis were measured through western blot analysis in liver tissue. Results : As a result, serum TG, TC, and LDL-cholesterol levels were significantly increased in the control group and significantly decreased in the CSW administration group. On the other hand, the HDL-cholesterol level was increased in the CSW-administered group. And as a result of Western blot analysis, CSW significantly increased the phosphorylation of LKB1 & AMPK, and remarkably decreased the expression of factors related to TG and TC synthesis. Conclusions : Our findings suggest that CSW influences the TG and TC synthesis to positively affect HFD-induced obesity in C57BL/6 mice.

암모니아 탈기공정을 이용한 침출수의 암모니아성 질소제거(I) (Removal of Ammonia-Nitrogen Contained in Landfill Leachate by Ammonia Stripping(I))

  • 이병진;조순행
    • 대한환경공학회지
    • /
    • 제22권10호
    • /
    • pp.1893-1904
    • /
    • 2000
  • 질소제거를 위한 처리기술은 아직까지는 주로 생물학적인 처리기술에 의존하고 있는 실정이다. 그러나 생물학적인 처리기술은 하수 등과 같은 저농도 암모니아성 질소성분을 함유한 폐수에 대해서는 비교적 광범위하게 정립되어 있는 반면, 질소성분외에 난분해성 및 독성물질을 고농도로 함유하고 있는 침출수 및 산업폐수에 생물학적 처리기술을 적용하는 방법은 처리효율면에서 한계가 있다. 따라서 본 연구에서는 질소 처리기술이 비교적 정립되어 있지 않은 고농도의 암모니아성 질소 성분을 함유한 침출수를 대상으로 생물학적 처리공정의 이전에 질소제거를 위한 암모니아 탈기공정의 적용가능성을 타진하고 자원 재활용 측면을 고려하여 처리된 질소성분의 회수 가능성을 조사하는 데 목적을 두었다. 실험결과 암모니아 탈기공정을 위하여 pH를 조정하기 위해서는 NaOH보다 $Ca(OH)_2$를 사용하는 것이 적정한 것으로 조사되었다. 암모니아 탈기에 적정한 pH는 10.5로 조사되었으며, 목표치인 500 mg/L를 만족시키기 위하여 소요되는 반응시간은 $35^{\circ}C$, 10 L/L/min의 조건에서는 2시간, $55^{\circ}C$, 10.0 L/L/min의 조건에서는 1시간이 소요되는 것으로 조사되었다. 이에 따라 생물학적 처리공정의 전단에 air diffused system을 이용한 암모니아 탈기공정의 적용은 고농도의 암모니아성 질소를 함유한 침출수의 처리에 매우 효과적인 것으로 결론지울 수 있었다. 그러나 생물학적 처리공정인 MLE 공정(T-N 최대 제거율: 78%, 암모니아성 질소 제거율: 98~99%)과 혐기성 소화조, 폭기식 라군산화조에서 질소성분을 완전히 제거하기 위하여 이들 공정전에 적용한 암모니아 탈기공정의 운전에 소요되는 약품비를 각각 산출하여 비교한 결과 암모니아 탈기공정이 MLE 공정에 비해 약품 소모비가 약 16% 정도 더 많이 소요되는 것으로 조사되었으므로 암모니아 탈기공정의 경제성을 높이기 위하여 슬러지를 재이용하는 방안 등을 검토하여야 할 것으로 판단되었다.

  • PDF