• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.2
• /
• pp.105-110
• /
• 2012

This paper designs the high-efficiency and the low-cost drive system of the smallsize electric vehicles (EVs). The power circuit for driving the dc motor is designed by considering both the cost and efficiency. In order to reduce the conduction loss of MOTFET and diode for controlling an armature voltage, some MOSFETs and diodes at the armature are in parallel connection. An operating sequence for both the field current and the armature voltage according to the accelerator pedal angle is suggested for changing smoothly the rotating direction of dc motor. Through the simulation studies, the performances of the proposed methods are verified.

• The Journal of Information Technology
• /
• v.9 no.4
• /
• pp.65-74
• /
• 2006

The back propagation of neural networks has the problems of falling into local minimum and delay of the speed by the iterative learning. An algorithm to solve the problem and improve the speed of the learning was already proposed in[8], which updates the learning parameter related with the connection weight. In this paper, we propose the algorithm generating initial weight to improve the efficiency of the algorithm by offering the difference between the input vector and the target signal to the generating function of initial weight. The algorithm proposed here can classify more than 98.75% of the handwritten digits and this rate shows 30% more effective than the other previous methods.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.8
• /
• pp.930-938
• /
• 1999

미래의 통합 이동 통신망은 멀티미디어 데이터 서비스를 하기 위해 작은 셀로 망이 구성될 것이다. 셀이 작은 경우, 이동 호스트의 셀간 이동이 상대적으로 증가해서 잦은 핸드오프 처리로 서비스 중단이 빈번히 발생할 수 있을 뿐만 아니라 자원의 낭비도 많아지게 된다. 따라서 이런 문제를 해결하기 위해 이동 호스트의 이동성을 예측해서 멀티캐스트 연결을 구성해서 사전 핸드오프 처리를 하는 SGMH방법을 제안한다. SGMH방법의 성능 평가를 위해 핸드오프 처리과정의 데이터 및 제어 정보의 흐름을 분석하고, 망 종속 인자들을 도입해서 버퍼 오버헤드와 서비스 중단 시간 면에서 기존 핸드오프 방법들과 비교했다. 비교 분석한 결과는 제안한 방법이 기존의 방법보다 기지국에서의 버퍼 오버헤드뿐만 아니라 서비스 중단 시간을 줄일 수 있음을 보였다.Abstract For mobile multimedia data services, future mobile communication networks will consist of small cells. In case of smaller cell size, the number of user movements between cells will increase and more network resources will be consumed for processing frequent handoffs. This processing delay will cause frequent connection service disruptions. To solve these problems, a multicast-based handoff method ,called SGMH(Sub-Group Multicast-based Handoff), is suggested. SGMH method estimates future movements of mobile hosts and setups a dynamic multicast connection tree for procesing handoffs. For performance evaluation, we represent flows of data and control messages as timing diagrams and introduce several network related factors. In terms of buffer overhead and service disruption time we compared the SGMH method to other methods. The results show that SGMH method has better performance in that it can reduce consumption of network resources and minimize service disruption time.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.25-27
• /
• 2012

The domestic construction industry recognize that review of design and construct-ability has the devastating effects. The way to take advantage of BIM for increase the possibility of discovered the design errors in advance are being discussed a lot recently. Since 2012, Public procurement published that the Turn-key project which is the more than 50 billion won in construction have to let the BIM-based design be mandatory. However, people expected the advent of BIM technology can resolve the existing design errors. But the situation is the connection of design stage and construction stage is very insufficient in domestic. Therefore, in this study understanding the types of design errors in construction phase. according the review of design errors before construction. Then can acceleration the application of BIM to improve the workability in a construction site.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3132-3143
• /
• 1996

In the evaluation of Broadband-ISDN, the main issue is to interconnect existing LANs and MANs to B-ISDN based on Asynchrous Transfer Mode. However, LANs provide connectionless services, whereas the ATM network provides connection-oriented services. So some problem arises from accessing ATM switchs to transparently transmit connectionless data via B-ISDN. Two methods then were recommended by ITU-TS to support the connectionaless services. In the paper, we do the numerical analysis, using the stochastic fluid flow method, of dynamic bandwidth allocation sheme with two class traffics in the virtual path established between Interworking Units(JWUS) interconnecting LANs to an ATM network and Connectionless Servers(CLSs). The loss mechanism of each traffic is controlled by the contents of buffer. The vandwidth which the IWU requests the CLS is estimated by the number of On-Off sources in the On state. We use the stochsastic fluide flow method which is to find the steady-state joint probability in each level of the IWU buffer. The length of the IWU buffer as the real random variable is changed by traffics entering the IWU.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.2
• /
• pp.151-155
• /
• 2017

Purpose: The aim of this study was to evaluate screw removal torque of the two-piece zirconia abutment with the novel titanium component compared to the conventional one-piece titanium abutment in the internal connection implant before and after dynamic cyclic loading. Materials and methods: Two types of the abutment assemblies with internal connection were prepared and divided into the groups; titanium abutment-titanium abutment screw assemblies as control, and zirconia abutment-titanium socket-titanium abutment screw assemblies as experimental group. A total of 12 abutments and implants were used of six assemblies each group. Each assembly was tightened to 30 Ncm. A cyclic load of 300 N at an angle of 30 degrees in reference to the loading axis was applied until one million cycles or failure. The removal torque values (RTVs) of the abutment screws were measured with a digital torque gauge before and after cyclic loading. The RTVs of the pre load and post load were analyzed with t-test, and P-values < .05 were considered statistically significant. Results: The assemblies of both groups survived all after the dynamic cyclic loading test without screw loosening. The statistically significant differences were found between the mean RTVs before and after the cyclic loading in both groups (P < .05). The RTV differences for the control and the experimental group were $-7.25{\pm}1.50Ncm$ and $-7.33{\pm}0.93Ncm$, respectively. Statistical analysis revealed that the RTV differences in both groups were not significantly different from each other (P > .05). Conclusion: Within the limitation of this study, the two-piece zirconia abutment with the titanium component did not show a significant RTV difference of the abutment screw compared to the titanium abutment after dynamic cyclic loading.

• KIEAE Journal
• /
• v.4 no.3
• /
• pp.87-94
• /
• 2004

The purpose of this study is to improve thermal environment of telecommunication equipment rooms that hold TDX-10, TDX-100, 5ESS-2000, PCM of the latest telecommunication equipment. Analysis program is used the commercial CFD code, Star-CD and DOE-2.1E. The result has been compared by the energy consumption and the temperature contour at the 1 m height of room for each case. Different methods such as the relocation of the existing air-conditioner, the inflow of the ambient air into room, the installation of the forced fan and the cooling system equipment of the duct-connection type have been used to test for improvement of thermal environment. The analysis shows that most efficient method is the inflow of the ambient air into room but auxiliary equipment should be needed to prevent the local thermal spot.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.10a
• /
• pp.503-510
• /
• 2004

One of the methods improving the seismic behavior of a structure is the frame with reduced beam section (RBS) which cuts a segment of flanges of the beam near the beam-to-column connection so that the section with reduced flanges has smaller flexural strength than the beam end. It is difficult to analyze the RBS frame because RBS portion has circular-cut type flange. And inelastic response of the steel frame with the RBS is very sensitive to the RBS model. In this paper, the analytical models of RBS portion are investigated and the results of the inelastic analysis for RBS analytical models are compared and then the analytical model for RBS is determined based on the results of inelastic analysis. Inelastic behavior of the RBS frame and its dynamic characteristics are investigated for selected analytical model of RBS.

• Journal of the Korea Furniture Society
• /
• v.19 no.3
• /
• pp.163-171
• /
• 2008

This Study has been conducted with many concerns about various teaching methods that attainable the substantial learning process of practical affair system in order to cope with the rapidly changing situation of the times and the educational environment in the field of design. Design Process Studying Method which utilizes 'Story Telling' as the process where the whole learning is achievable, in accordance with the educational target of the creative professional technician training that complies with the requirement of the times, and by progress of the integrated structure dividing as 1, 2, 3 stages, it doubles various studying effect, and it enables to expect the connection studying effect with other study-subject. Since the process of such program induces the positive participation of the student, it was known that a superior interchange of information is attainable, and due to its enthusiasm and interest on the study, the participating rate for study was appeared very highly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.2
• /
• pp.268-279
• /
• 1997

In this paper, we show the movable boundary (MB) method is the effective bandwidth allocation strategy for the ABR service among existing bandwidth allocation methods. The MB method can gurantee the QOS requirement according to the service priority and improve bandwidth utilization using the characteristics of the ABR service. The threshold values of the MB, which have an important effect upon connection blocking probability(CBP) performance of each service, are obtained by simulation. The MB method with the fixed thresholds, however, may not have good performance to variation of input traffic parameters. We suggest the dynamic MB method which changes the threshold values adaptively according to the required bandwidth of input traffic. We also show that the dynamic MB method can urantee the CBP performance according to the service priority regardless of variation of input traffic parameters.