• 한국운동역학회지
• /
• 제19권2호
• /
• pp.399-406
• /
• 2009

본 연구의 목적은 롤러 신발과 조깅 신발 착용 후 보행 시 운동학적 변인에 대하여 비교 분석 하는데 있다. 이를 위해 하지 근골격계에 이상이 없는 중학생 8명을 피험자로 선정하여 3차원 동작 분석을 실시하였다. 분석 결과, 활보장, 인체무게 중심변위 및 선속도, 관절각 및 각속도에서 집단 간 통계적으로 유의한 차이를 보였다. 특히 롤러 집단의 경우 지지 시 발목 관절각이 증가하고 무릎각의 각속도가 감소하는 결과를 나타내었다. 이는 롤러 신발의 경우 장착된 휠에 의해 지지 시 적절한 배측굴곡이 이루지지 못하고, 불안정성을 극복하기 위해 무릎의 과도한 굴곡이 나타난 것으로 사료되어 진다. 이러한 운동학적 변인의 차이는 롤러 신발 보행 시 정상 패턴과는 다른 불안정한 보행 동작을 유발시키고 이러한 동작이 지속적으로 이루어진다면 하지 근골격계에 변화를 유발시켜 부상 유발의 가능성이 있을 것으로 생각된다. 따라서 본 연구 결과를 토대로 향후 보다 안정성 높은 롤러 신발을 개발할 수 있을 것으로 기대된다.

• 대한족부족관절학회지
• /
• 제16권4호
• /
• pp.229-234
• /
• 2012

Purpose: The purpose of this study is to find out clinical and radiological outcomes in 70 patients of both calcaneal fracture. Materials and Methods: From March 1993 to March 2011, 70 patients underwent non-operative management or operative management at our hospital. Conservative management was performed in 15 cases of undisplaced fracture (Group A). Operative management was performed in 125 cases including 32 cases of undisplaced fracture (Group B), 60 cases of joint depression type fracture (Group C), 33 cases of tongue type fracture (Group D). Results were evaluated by VAS score, AOFAS score, circle draw test, Bohler angle (BA), Gissane angle, width & height of calcaneus. Results: VAS scores were 2.0 in group A, 2.0 in group B, 2.2 in group C, 2.7 in group D. AOFAS scores were 90.4 in group A, 91.9 in group B, 72.2 in group C, 79.2 in group D. Circle draw tests were 8.4 cm in group A, 10.1 cm in group B, 7.6 cm in group C, 7.9 cm in group D. Bohler angles (BA) and Gissane angles were $19.1^{\circ}$, $96.7^{\circ}$ in group A, $21.8^{\circ}$, $119.1^{\circ}$ in group B, $26.3^{\circ}$, $121.2^{\circ}$ in group C, $19.7^{\circ}$, $119.7^{\circ}$ in group D. Calcaneal widths and heights were 39.5 mm, 31.6 mm in group A, 32.7 mm, 37.0 mm in group B, 34.4 mm, 39.2 mm in group C, 35.2 mm, 38.7 mm in group D. Conclusion: The main cause of bilateral calcaneal fracture is an injury from a fall, and the cases were more frequently occurred in men than women. Also the fracture in the right side tend to occur more severely compared to the left side. The surgical treatment shows better results than conservative treatment in bilateral calcaneal fracture.

• 한국운동역학회지
• /
• 제15권1호
• /
• pp.29-44
• /
• 2005

The purpose of this study is to reveal the effects of two different kicks, the drop kick and the punt kick, into the kicking motion, through the kinetic comparative analysis of the kicking motion, which is conducted when one kicks a soccer goal. To grasp kinetic changing factors, which is performed by individual's each body segment, I connected kicking motions, which were analyzed by a two dimension co-ordination, into the personal computer to concrete the digits of it and smoothed by 10Hz. Using the smoothed data, I found a needed kinematical data by inputting an analytical program into the computer. The result of comparative analysis of two kicking motions can be summarized as below. 1. There was not a big difference between the time of the loading phase and the time of the swing phase, which can affect the exact impact and the angle of balls aviation direction. 2. The two kicks were not affected the timing and the velocity of the kicking leg's segment. 3. In the goal kick motion, the maximum velocity timing of the kicking leg's lower segment showed the following orders: the thigh(-0.06sec), the lower leg(-0.05sec), the foot(-0.018sec) in the drop kick, and the thigh(-0.06sec), the lower leg(-0.05sec), the foot(-0.015sec) in the punt kick. It showed that whipping motion increases the velocity of the foot at the time of impact. 4. At the time of impact, there was not a significant difference in the supporting leg's knee and ankle. When one does the punt kick, the subject spreads out his hip joint more at the time of impact. 5. When the impact performed, kicking leg's every segment was similar. Because the height of the ball is higher in the punt kick than in the drop kick, the subject has to stretch the knees more when he kicks a ball, so there is a significant affect on the angle and the distance of the ball's flying. 6. When one performs the drop kick, the stride is 0.02m shorter than the punt kick, and the ratio of height of the drop kick is 0.05 smaller than the punt kick. This difference greatly affects the center of the ball, the supporting leg's location, and the location of the center of gravity with the center of the ball at the time of impact. 7. Right before the moment of the impact, the center of gravity was located from the center of the ball, the height of the drop kick was 0.67m ratio of height was 0.37, and the height of the punt kick was 0.65m ratio of height was 0.36. The drop kick was located more to the back 0.21m ratio of height was 0.12, the punt kick was located more to the back 0.28m ratio of height was 0.16. 8. There was not a significant difference in the absolute angle of incidence and the maximum distance, but the absolute velocity of incidence showed a significant difference. This difference is caused from that whether players have the time to perform of not; the drop kick is used when the players have time to perform, and punt kick is used when the players launch a shifting attack. 9. The surface reaction force of the supporting leg had some relation with the approaching angle. Vertical reaction force (Fz) showed some differences in the two movements(p<0.05). The maximum force of the right and left surface reaction force (Fx) didn't have much differences (p<0.05), but it showed the tendency that the maximum force occurs before the peak force of the front and back surface (Fy) occurs.

• 건축역사연구
• /
• 제31권6호
• /
• pp.59-68
• /
• 2022

This paper is an architectural historical study on Chimi of Hwangnyongsa Temple. In this research, the shape and cross-section of the chimi are reviewed. The results of the study are as follows. The chimi is a form in which the head part facing the maru is omitted, and the upper and lower body are separated. The upper and lower bonds are assembled into a two types of joint throughout the side of the torso, and then bound with an iron strap. Because of the absence of ridge line in the front, and the narrow curved surface which makes the side plate close to the plane, the entire cross-section is triangular, and the rear plate maintains the shape of the chimi. The naerimmaru connected to the side of the chimi has a slope, so it is clear that the chimi was used on the woojingak-jibung(hipped-roof), and the wing part and back of the chimi are erected on the side roof. The height of the yongmaru and chunyeomaru is about the same and the roofing tiles of those are in contact. The roofing tiles of chunyemaru should be cut to fit the angle of the contacting part. The maru is 30 stories high of roofing tiles as a result of the on-board survey. Based on reference on the shape and timing of the production of chimi, the height of chimi, and the maru is believed to have been built before the Unified Silla Period and used in buildings with at least seven-kan frontage. Buildings corresponding to these construction conditions can be seen as Central hall and East hall in Hwangnyongsa temple.

• Journal of Korean Neurosurgical Society
• /
• 제48권5호
• /
• pp.406-411
• /
• 2010

Objective : Esophageal/hypopharyngeal injury can be a disastrous complication of anterior cervical surgery. The amount of hypopharyngeal wall exposure within the surgical field has not been studied. The objective of this study is to evaluate the chance of hypopharyngeal wall exposure by measuring the amount of axial rotation of the thyroid cartilage (ARTC) and posterior projection of the hypopharynx (PPH). Methods : The study was prospectively designed using intraoperative ultrasonography. We measured the amount of ARTC in 27 cases. The amount of posterior projection of the hypopharynx (PPH) also was measured on pre-operative CT and compared at three different levels; the superior border of the thyroid cartilage (SBTC), cricoarytenoid joint and tip of inferior horn of the thyroid cartilage (TIHTC). The presence of air density was also checked on the same levels. Results : The angle of ARTC ranged from $-6.9^{\circ}$ to $29.7^{\circ}$, with no statistical difference between the upper and lower cervical group. The amount of PPH was increased caudally. Air densities were observed in 26 cases at the SBTC, but none at the TIHTC. Conclusion : Within the confines of the thyroid cartilage, surgeons are required to pay more attention to the status of hypopharynx/esophagus near the inferior horn of the thyroid cartilage. The hypopharynx/esophagus at the TIHTC is more likely to be exposed than at the upper and middle part of the thyroid cartilage, which may increase the risk of injury by pressure. Surgeons should be aware of the fact that the visceral component at C6-T1 surgeries also rotates as much as when the thyroid cartilage is engaged with a retractor. The esophagus at lower cervical levels warrants more careful retraction because it is not protected by the thyroid cartilage.

• 대한치과교정학회지
• /
• 제47권5호
• /
• pp.277-288
• /
• 2017

Objective: Treating Class II subdivision malocclusion with asymmetry has been a challenge for orthodontists because of the complicated characteristics of asymmetry. This study aimed to explore the characteristics of dental and skeletal asymmetry in Class II subdivision malocclusion, and to assess the relationship between the condyle-glenoid fossa and first molar. Methods: Cone-beam computed tomographic images of 32 patients with Class II subdivision malocclusion were three-dimensionally reconstructed using the Mimics software. Forty-five anatomic landmarks on the reconstructed structures were selected and 27 linear and angular measurements were performed. Paired-samples t-tests were used to compare the average differences between the Class I and Class II sides; Pearson correlation coefficient (r) was used for analyzing the linear association. Results: The faciolingual crown angulation of the mandibular first molar (p < 0.05), sagittal position of the maxillary and mandibular first molars (p < 0.01), condylar head height (p < 0.01), condylar process height (p < 0.05), and angle of the posterior wall of the articular tubercle and coronal position of the glenoid fossa (p < 0.01) were significantly different between the two sides. The morphology and position of the condyle-glenoid fossa significantly correlated with the three-dimensional changes in the first molar. Conclusions: Asymmetry in the sagittal position of the maxillary and mandibular first molars between the two sides and significant lingual inclination of the mandibular first molar on the Class II side were the dental characteristics of Class II subdivision malocclusion. Condylar morphology and glenoid fossa position asymmetries were the major components of skeletal asymmetry and were well correlated with the three-dimensional position of the first molar.

• Journal of Korean Neurosurgical Society
• /
• 제63권2호
• /
• pp.228-236
• /
• 2020

Objective : It can be assumed that the progression of scoliosis in the juvenile period will increase the asymmetry in the rib cage, and thus will contribute to an increase in the breast asymmetry (BA) in the future. We are looking for answers to the questions; "How will the breasts look with respect to each other and what is the possibility of developing BA in the early follow-up period following the early surgical treatment and final fusion surgery of juvenile idiopathic scoliosis (JIS)?" For this reason, in this study, we aimed to evaluate the breast asymmetries of patients in the period after the final fusion. Methods : Following growing rod treatment, final fusion was achieved in 12 females with JIS. We used the anthropomorphic measurement of the modified BREAST-V formula to assess whether there was an asymmetry between the breasts after an average of 4.8 years (2-11) following final fusion. Results : In comparison, the mean volume of the left breast (222.4 mL [range, 104.1-330.2]) was larger than the mean volume of the right breast volume (214.5 mL [range, 95.2-326.7]) (p=0.034). The left breast was larger in 75% of the patients. BA was observed in 50% of the patients. No correlation was detected between the Cobb angle of the patient after final fusion and BA (p=0.688). Conclusion : In the late follow-up period, BA was detected in 50% of the patients with JIS who achieved final fusion after treatment with growing rod. In majority of the patients, left breast was larger. The patients with JIS and their families can be informed prior to the operation about the probability of BA seen in the follow-up period after fusion.

• Journal of Korean Neurosurgical Society
• /
• 제58권6호
• /
• pp.499-503
• /
• 2015

Objective : The transradial catheterization (TRC) is becoming widespread, primarily for neurointerventions. Therefore, the evaluation of radial artery puncture in clinical practice and a better understanding of the anatomy are important to improve the safety of neuroendovascular surgery. Methods : Ten formalin-fixed adult Korean cadavers were dissected to expose radial artery (RA), brachial artery (BrA) and subclvian artery (ScA), bilaterally. Vessel lengths and diameters were meaured using a caliper and distance between the specific point of vessels and the anatomical landmarks including the radial styloid process, the medial epicondyle of the humerus, the sternoclavicular joint, and the vertebral artery orifice were also measured. Results : The average length between the radial (RAPS) and the BrA puncture sites (BrAPS) and between the vertebral artery orifice (VAO) and the BrA bifurcation (BrAB) did not differ between sides (p>0.05). The average length between the radial styloid process (RSP) and the RAPS was $13.41{\pm}2.19mm$, and the RSP was $26.85{\pm}2.47mm$ from the median nerve (MN). The mean length between the medial epicondyle (ME) and the BrAPS as $44.23{\pm}5.47mm$, whereas the distance between the ME and the MN was $42.23{\pm}4.77mm$. The average VAO-ScA angle was $70.94{\pm}6.12^{\circ}$, and the length between the ScA junction (SCJ) and the VAO was $60.30{\pm}8.48mm$. Conclusion : This study provides basic anatomical information about the radial artery and the brachial route and can help improving new techniques, selection of size and shape of catheters for TRC. This can help neurointerventionists who adopt a transradial neuroendovascular approach and offers comprehensive and safe care to their patients.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2004년도 제20회 발표논문집
• /
• pp.33-42
• /
• 2004

The forged iron axe found in the No. 2 wood-framed tomb (the middle 3rd century) of Hwangseongdong, Gyeongju is rectangular on the plane level. It shows an obtuse angle in the edge part, while the joint part has the both sides folded up and shows the traces of wood. Under the reflected light, the Iron axe shines in metal luster, which is bright light gray or light creamy colors. The result of x-ray diffraction analysis shows that the axe consists of magnetite and geothite, which can explain why the composition and structure of the original ore has been kept intact. The microtexture of the axe has the irregular network of ferrite and pearlite, and tile cementite of tiny amount in the ferrite background. The overall treatment of the texture seems to be thermal with a high ratio of carbon. There are fine-grained magnetite, wolframite, quartz, calcite, mica, hornblende and pyroxene inside the axe. Those must be the impurities that they failed to remove in the refining process. The normal ferrite is composed of pure iron whose $Fe_2O_3$ proportion is from 99.16 to $99.84\;wt.\%$. Other than them, the ferrite parts usually contain $Al_2O_3\;and\;SiO_2$. The irregular network of pearlite also contains Impurities including $Al_2O_3\;and\;SiO_2$ and shows highly diverse patterns of carbon content. It's because the axe was carburized after the material was made to resemble pure iron. The decarbonization work didn't go well along the process marks. It's estimated that the original ore was bloom produced in low-temperature reduction and formed around in $727^{\circ}C$, which is eutetic temperature.

• Geomechanics and Engineering
• /
• 제32권4호
• /
• pp.375-385
• /
• 2023

There are many joint fissures distributed in the engineering rock mass. In the process of geological history, the underground rock mass undergoes strong geological processes, and undergoes complex geological processes such as fracture breeding, expansion, recementation, and re-expansion. In this paper, the damage-stick-slip process (DSSP), an analysis model used for rock mass failure slip, was established to examine the master control and time-dependent mechanical properties of the new and primary fractures of a multi-fractured rock mass under the action of stress loading. The experimental system for the recemented multi-fractured rock mass was developed to validate the above theory. First, a rock mass failure test was conducted. Then, the failure stress state was kept constant, and the fractured rock mass was grouted and cemented. A secondary loading was applied until the grouted mass reached the intended strength to investigate the bearing capacity of the recemented multi-fractured rock mass, and an acoustic emission (AE) system was used to monitor AE events and the update of damage energy. The results show that the initial fracture angle and direction had a significant effect on the re-failure process of the cement rock mass; Compared with the monitoring results of the acoustic emission (AE) measurements, the master control surface, key blocks and other control factors in the multi-fractured rock mass were obtained; The triangular shaped block in rock mass plays an important role in the stress and displacement change of multi-fracture rock mass and the long fissure and the fractures with close fracture tip are easier to activate, and the position where the longer fractures intersect with the smaller fractures is easier to generate new fractures. The results are of great significance to a multi-block structure, which affects the safety of underground coal mining.