• 품질경영학회지
• /
• 제24권2호
• /
• pp.25-43
• /
• 1996

This paper presents the optimal and practical constant-stress accelerated life test plans for the lognormal lifetime distribution tinder assumptions of intermittent inspection and Type-I censoring. In an optimal plan, the low stress level and the proportions of test units allocated at each stress are determined under given inspection scheme and number of inspections such that the asymptotic variance of the maximum likelihood estimator of a certain quantile at use condition is minimized. Although the practical plan adopts the same design criterion, it involves three rather than two overstress levels in order to compromise the practical deficiencies of the optimal plan. Computational experiments are conducted to choose an allocation plan and a inspection scheme of the practical plan and to compare with test plans over a range of parameter values.

• 대한인간공학회지
• /
• 제23권1호
• /
• pp.13-22
• /
• 2004

Due to economical or technological reasons. humans are responsible for inspection functions in many cases. Humans. however. are rarely perfect. thus allowing non-confirming parts to be processed. As the attributes of interest or the variety of products increases. the inspection system becomes less effective because of the sensory and cognitive limitations of human inspectors. Any means that can support or aid the human inspectors is necessary to compensate for inspection difficulty. Augmented reality (AR) offers a new approach in designing an inspection system as a means to augment the cognitive capability of inspectors by providing the 3D spatial proximity between two information channels. The experimental results suggest that AR might be an effective tool that reduces inspection time without sacrificing the measuring accuracy.

• 한국정밀공학회지
• /
• 제15권5호
• /
• pp.9-18
• /
• 1998

The components with J-lead. which are more integrated and smaller than ones with Gull-wing. are rapidly being used in electronic board such as the PCB, for they have the advantage of occupying a small space compared to the other components. However, the development of inspection system for these new components is not so rapid as component development. Component-inspection with J-lead using vision system is difficult because they are hidden from camera optical axis. X-ray inspection, which has the advantage of inspecting the inside of solder state, is used to J-lead inspection. However. it is high cost and dangerous by leaking out X-ray compared to vision system. Therefore, in this paper, we design vision system suited to J-lead inspection and then propose algorithm which have flexibility in mount and rand error.

• 반도체디스플레이기술학회지
• /
• 제2권4호
• /
• pp.1-7
• /
• 2003

In this paper, we design the pattern generator circuits using PLDs(Programmable Logic Devices). The pattern generator is the circuit which generates the test pattern signal for the inspection of logical defects of semiconductor products. The proposed circuits are designed by the PLD design tool(MAX+ II of ALTERA). Also the designed circuits are simulated for the verification of the designed ones. The simulation results have a good performance.

• 품질경영학회지
• /
• 제25권1호
• /
• pp.1-16
• /
• 1997

In this paper, we illustrate how to design screening inspections for minimizing a total quality costs in a multi-stage manufacturing systems. The total quality cost model consists of inspection costs, internal failure costs, external failure costs, and Taguchi's loss function. Although, the use of automatic test equipment such as machnie vision and CMM has greatly increased inspection speed and accuracy, screeing(100% inspection) could be considered only as a short-term method to remove nonconforming items from a population, not for a long-term quality improvement. However, screeing should be used for certain situations such as before costly operations and after unsatisfied operations. This paper ends with an example that demonstrates the usefulness of the model.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 춘계학술대회
• /
• pp.443-450
• /
• 2008

This paper is to present design principle and operation strategy of acceptance control chart by the use of OC-Based sampling inspection for continuous data. The unified control limits for acceptance control chart when considering both APL(Acceptable Process Level) and RPL(Rejectable Process Level) are proposed. The control limits can be also extended to the acceptance control chart with unknown process standard deviation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권1호
• /
• pp.175-183
• /
• 2008

In this paper, a new in-pipe inspection robot was developed for inspecting a large number of circular pipe insides of the sea plant, ships, and buildings. A new pressure generation system was devised to inspect circular pipes with different diameters and to move up and down slant or perpendicular slopes inside of the pipe. Also, a design method was analyzed to decide the capacity of driving motor for the robot if the mass and maximum velocity of the robot are identified. According to the design specification, a robot was developed and was tested to verify the performance of the pressure generation system. For tests, a control system was developed.

• 한국정보전자통신기술학회논문지
• /
• 제13권6호
• /
• pp.530-538
• /
• 2020

옥외광고는 일정한 장소의 건축구조물의 외형에 고정되는 형태가 일반적이므로 건물 및 주변 환경과의 조화가 요구된다. 이러한 옥외광고물은 자연, 건축, 거리경관을 고려한 심미적 요소가 조화롭게 배치되어야 하며, 법적 규제로 인한 실행 제한이 많은 것이 현실이다. 옥외광고물의 안전도 검사는 옥외광고물의 노후화된 상태, 규격 및 설계도서와 일치여부 등을 판단하기 위해 시행하고 있는데, 노후화된 광고물의 경우 도시의 심미적 요소를 저해할 뿐만 아니라, 차도나 보행로로 떨어지는 사례 등이 발생하여 안전적 측면에서 주기적인 검사가 시행되고 있다. 그러나 현재의 안전도 검사는 건축물 입면의 높은 간판을 심사할 때 인사사고가 발생할 위험이 있으며, 건물의 입면에 고정된 옥외 광고의 구조물은 심도 있게 검사를 시행하여 내용을 파악하기가 어렵다. 이에 본 논문에서는 드론을 활용한 옥외광고물 안전 점검 체계를 제고하고자 하며, 나아가 안전 점검 주기, 유지보수, 간판 제거 등 시설점검 이력 관리 방안을 제시하고자 한다.

• 한국산업융합학회 논문집
• /
• 제23권3호
• /
• pp.463-471
• /
• 2020

Recently, various tries to apply ROV (Remotely Operated Vehicle) into underwater are being developed. However, due to underwater environment uniqueness, the additional problem must be taken into account when designing an ROV for the inspection of the underwater structure. This is because a GPS-based information method cannot be applied, and the obtainable image is also dependent on the turbidity. Also, it is necessary to be able to satisfy waterproof and operating speeds in consideration of most practical application environments. This paper describes the design results of the ROV system for underwater structure inspection considering the above problems. The designed system applied INS / DVL for location recognition and was configured to support 3D mapping and stereo camera-based image information using sonar depending on visibility. To satisfy the waterproof, a pressure vessel using a composite material was applied. And over-actuated system using eight thrusters to maintain a stable posture and operating speed was applied also. The designed system was verified by structural analysis and flow analysis also.

• 상하수도학회지
• /
• 제30권6호
• /
• pp.623-634
• /
• 2016

Sewer condition assessment involves the determination of defective points and status of aged sewers by a CCTV inspection according to the standard manual. Therefore, it is important to establish a reliable and effective standard manual for identifying the sewer defect. In this study, analytic reviews of the CCTV inspection manuals of the UK, New Zealand, Canada and South Korea were performed in order to compare the defect codes and the protocols of condition assessment. Through this, we also established the standardized method for defect code and revised the calculation method of assigning the condition grade. Analyses of the types and frequencies of sewer defects that obtained by CCTV inspection of 7000 case results, showed that the joint defect and lateral defect were the most frequent defects that occurred in Korea. Some defect codes are found to be modified because those did not occur at all. This study includes a proposed new sewer defect codes based on sewer characteristics.