• Journal of Korea Foundry Society
• /
• v.29 no.6
• /
• pp.270-276
• /
• 2009

After casting button-type small ingots of ternary Fe-Mn-S alloys which had three different Mn/S ratios (1, 5 and 70) in a vacuum arc furnace, the effect of the ratio on the sulfide formation was investigated. In case of the Mn/S ratio of 1, if alloy composition was located in an iron-rich corner on a Fe-Mn-S ternary phase diagram, only duplex MnS-FeS sulfide films were observed in the grain boundary. If the alloy composition was located in the miscibility gap area of the phase diagram, primary globular dendritic sulfides and dendritic sulfide slags were generated within the grain and tubular monotectic sulfides were also detected in the grain boundary. When the Mn/S ratio was 5, if the alloy composition was in the iron-rich corner, only bead-like sulfides were generated. On the other hand, if the composition was in the miscibility gap area, globular dendritic sulfides and dendritic sulfide slags were generated in the form of primary sulfide inclusions and rod-like eutectic sulfides were observed in the grain boundary. Especially, if the contents of Mn and S increased more in the miscibility gap area of the phase diagram, primary globular sulfides containing iron intrusions were observed. In case of Mn/S ratio of 70, if the contents of Mn and S was decreased in the Fe corner of the phase diagram, only bead-like sulfides were observed in the grain boundary. Despite the composition was outside the miscibility gap area of the phase diagram, if the contents of Mn and S increased, clusters of fine sulfide particles as well as fine spherical primary monophase sulfides were observed in the grain boundary.

• Resources Recycling
• /
• v.21 no.6
• /
• pp.74-81
• /
• 2012

The Influence of temperature on the recovery reaction of silver in aqueous solution was investigated based on Pourbaix diagram constructed by thermodynamic calculation at different temperatures. It was observed that the stability of water is more strongly affected by pH variation and the stable region of ${Ag^+}_{(aq)}$ is diminished at higher temperature. It was shown that the recovery of $Ag_{(aq)}$ in the forms of $Ag_{(s)}$ and $Ag_2O_{3(s)}$ is more advantageous thermodynamically at lower temperature, however, the recovery of $Ag_{(aq)}$ in the forms of $Ag_2O_{(s)}$ 및 $Ag_2O_{2(s)}$ is more advantageous as temperature increases. The rise of temperature is considered to demote the recovery of silver thermodynamically in strong acidic condition ($pH{\leq}2$), but more silver is regarded to be recovered with temperature above pH 2. Finally, The recovery of silver in the elemental state is shown to be more sensitively influenced by temperature variation compared with the recovery of silver in its oxide form.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.6
• /
• pp.657-668
• /
• 2002

Software life cycle consists of requirement analysis, design, implementation, and maintenance phases, and the product of each phase has various format. The UML normalizes such products, and the class diagram, use case diagram, activity diagram and collaboration diagram are usually used for the requirement analysis phase. Because most of UML development tools store such diagrams in a file, there nay be some difficulties of information retrieval and co-work among users. To cope with the difficulties, this paper proposes a database supported methodology to store and manage the diagrams produced by the requirement analysis. In this methodology, the constituents of class, use case, activity and collaboration diagram are first analyzed and then transformed in the form of relational fables. The constituents of such diagrams are stored as tables in a database, and can be easily retrieved from the database by using some queries. This database supported methodology provides the concurrent sharing and high reuse of diagrams.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.10
• /
• pp.3687-3691
• /
• 2011

Ion exchange experiments of molybdenum(VI) from strong HCl and $H_2SO_4$ solution have been done to investigate the existence of anionic complexes. The concentration of HCl and $H_2SO_4$was changed from 1 to 9 M. From the data on the complex formation of molybdenum in aqueous solution, a new distribution diagram of Mo(VI) was constructed in the pH range from zero to 10. AG 1 X-8, an anion exchange resin, and Diphonix, a cation exchange resin were used in the loading experiments. Ion exchange results indicate that anionic complexes of Mo(VI) begins to form from 3 M HCl and 1 M $H_2SO_4$ solution and the tendency to form anionic complexes is stronger in HCl than in $H_2SO_4$ solution. Our results can be utilized in the analysis of Mo(VI) in strong acid solution and in the design of a process to separate Mo(VI).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.25-26
• /
• 2011

• Journal of the Korea Society for Simulation
• /
• v.21 no.2
• /
• pp.19-30
• /
• 2012

In recent decades, it has been known that the Discrete Event System Specification, or DEVS, formalism provides sound semantics to design a modular and hierarchical model of a discrete event system. In spite of this benefit, practitioners have difficulties in applying the semantics to real-world systems modeling because DEVS needs to specify a large size of sets of events and/or states in an unstructured form. To resolve the difficulties, this paper proposes an extension of the DEVS formalism, called the Structured DEVS formalism, with an associated graphical representation, called the DEVS diagram, by means of structural representation of such sets based on closure property of set theory. The proposed formalism is proved to be equivalent to the original DEVS formalism in their model specification, yet the new formalism specifies sets in a structured form with a concept of phases, variables and ports. A simplified example of the structured DEVS with the DEVS diagram shows the effectiveness of the proposed formalism which can be easily implemented in an objected-oriented simulation environment.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2011

Linear scheduling method limits to present works of work breakdown structure as a form of lines and was often developed manually. In other words, linear schedule could not utilize activity, work breakdown structure, and etc. information of network schedule such as CPM(Critical Path Method) and has been used only for reporting or confirming construction master plan. Therefore, it is necessary to develop system which can automatically generating the linear schedule based on the network schedule having many accumulated and useful construction schedule information. Thus, this research has an effort to establish data process model, data flow diagram, and data model in order to make linear schedule. In addition, this research addresses the system solution structure, user interface class diagram and logic diagram, and data type schema. The results of this paper can be used as a preliminary research for developing linear schedule generating system prototype by utilizing the network schedule information.

• Korean Institute of Interior Design Journal
• /
• v.23 no.5
• /
• pp.3-13
• /
• 2014

Typology in Contemporary Architecture wants to escape from the classical typology that has the problems about specific program of structuralism, typical repeatation of customary form. As visible and non-visible things are appeared in contemporary architecture through the analysis of the inner system involving development process of changing itself, typology of contemporary is utilized at a tool of form generation in the process of architect. And it notes that the structural properties of the building system. The form of contemporary architecture has the new connecting strucure not reduced to existing ones. It carries out generative access as a device in order to solve the complexity of society. From this perspective, we analyze the process of projects of contemporary architects that can be typological strategy not representation of post geometric form but a tool of form generation in architectural process. As a result, we can find four characteristics of typology as a tool of form generation; 'interference and mix of program', 'continous slabs', 'rearrangement through relationship setting', 'transformation of multi-layers'. These are expanding to the process that reflect history and context or infer from morphology. Therefore, typology as architectural process of form generation overcomes morphological typology of classical typology and suggests that the different architectural approach having potential possibility.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.616-620
• /
• 2003

Brake action is important in train operation. In case of diesel motor cas, coachs and wagon, the brake system is only act on the stop of train, but it is emphasis on safety and convenience in urban transit system such as EMU, subwar, AGT, etc. Brake of EMU has two types. one is called service brake that is used at normal operation. The other is called emergency brake. it is used at emergency operation. Service brake bring a EMU to a halt through a blending brake that form electronic brake and frictional brake. Generally EMU compose motor car and trailer car. Blending brake bring a EMU to a halt through a blending brake that form electronic brake of motor car and frictional brake of trailer car. Blending braking technology have different characteristics each nations or manufacturing companies. but deceleration command that is parameter decide blending brake. According to deceleration command, electronic brake and frictional brake are applied differently So braking power is different. electronic brake and frictional brake must be used appropriately as deceleration command. Also braking facilities must be stopped EMU more economically and safely through revision of algorism about blending brake according to output diagram. Thus The purpose of paper is to propose blending braking control way as consideration of braking output diagram used deceleration command that influence blending brake of EMU.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.964-967
• /
• 2001

Aspherical lens with the higher numerical aperture has been needed in the optical storage device to increase the recording density on the disk. However, high numerical aperture means the large slope angle at the clear aperture of the lens. Therefore, the measurement and manufacturing technique including the lens molding process for the slope angle should be developed. In this paper, the evaluation technique was described for the optical performance of the aspherical lens. Aspherical form error brings about the wavefront error and the side lobe of the beam intensity profile. A schematic diagram of the aspherical lens manufacturing was drawn to explain the aspherical form error compensation. Finally, form error of the aspherical lens was defined and plotted using the raw data of the Formtalysurf.