• Applied Microscopy
• /
• v.26 no.1
• /
• pp.79-93
• /
• 1996

The differentiation of nail matrix and fine structure of matrix cells were studied with light and electron microscope using specimens from nails of thumb finger in Korean fetuses 14 to 24 weeks old. Fetal nail matrix consisted of two horizontal layers, thicker ventral and thinner dorsal matrices, originating from invagination of epidermis in proximal nail field. Matrix being generally thicker in its distal region than the apex became gradually thickened with increase of the fetal age. Each matrix consisted of single layer of basal cells and multiple layers of squamous cells which are arranged close to and parallel to the central axis of the nail mairix. The process of keratinization of fetal nail matrix was noted to be occured concurrently in the ventral and dorsal matrices along the central axis of matrix toward distal and dorsal direction. Squamous cells became matured with accumulation of tonofilaments, increase of keratohyalin granules, discharge of membrane coating granules, and narrowing of intercellular spaces, thickening of plasma membrane and finally being transformed into horny cells of nail plate. Horny cells of nail plate filled with fibrous elements in the electron dense amorphous substance. These findings of keratinization process of fetal nail matrix appeared to be similar to those of keratinization in epidermis and inner root sheath of the hair. In the nail matrix, however, corresponding region to the keratogenous zone of growing hair follicle was not observed. Vacuolated squamous cells of nail matrix seen on light microscopy was considered to be artefactual product, but squamous cells with condensed small nuclei rarely found adjacent nail plate was considered to be one of the squamous cells with unknown function. Proximal end of nail plate was observed on dorsal surface of nail field distal to the proximal nail fold at 14 and 16 weeks old human embryos. Proximal prolongation of the proximal end of nail plate was occured with advancing fetal age and afterward 21 weeks nail plate invaded into nail matrix. Melanin granule containing cells and Merkel cells were present only on the basal layer of dorsal nail matirx.

• Journal of architectural history
• /
• v.19 no.6
• /
• pp.233-250
• /
• 2010

Jukseoru as an official pavilion of the government, one of the eight sceneries in Gwndong Area, is located on the cliff over Osipcheon River. This paper interprets form and space of the pavilion with restored old life by analyzing pictures of official party in 18th century in Chosun Dynasty. Every part of the space is occupied by persons by the class and duty: the pricipal guest, nobles, subordinates, gisaengs, court musicians, and guards from the high to the low and from the inside to the outside. Applying the analysis to the Jukseoru pavilion, the noblest lord takes sit on the platform in front of folded screen at main bay under checked ceiling, enclosed by low timber beam. The next northern end bay is a place for subordinates' and servants' waiting for preparation for rice wine. Southern end entrance bay is not a result of later addition but deliberately and originally made for lower place outside the railing of wooden floor: for a waiting woman gisaeng, and subordinates. Outside under the eaves on the platform with bedrock, artificial stone and soil is a place for court musicians, subordinates, and guards. The yard in front of the building is a place for preparing meals by cookers. Every detailed ornamental form is different each other by the place for the occupied class. Existing theory tells that the building, 7 bays gable-and-hipped roof, is a result of structural extention of 2 bays at the 5 bays gabled-roof. However, through the interpretation of old pictures and application to the pavilion, the present Juseoru is not a result of later structural addition, but deliberately designed creation suited to life in hierarchical traditional society.

• Journal of the Optical Society of Korea
• /
• v.19 no.4
• /
• pp.327-333
• /
• 2015

This paper reports the fabrication of various micro-lensed single-mode optical fibers through the use of an enhanced peak power $CO_2$ laser beam. The end faces of the optical fibers are exposed to the $CO_2$ laser beam to form convex, concave, and conical shape optical fiber tips. Peak power of the $CO_2$ laser beam was varied from 0.8 W to 1.5 W depending on the shape of the optical fiber tip. We also discover the dependence of the angle of the optical fiber tip on the rotation angle and the number of $CO_2$ laser irradiations. The angle shows an increasing trend with both these parameters. We achieve a wide range of lenticular fibers with end face angle varying from $4.47^{\circ}$ to $8.13^{\circ}$. Furthermore, we investigate the emission pattern of light from the developed micro-lensed fibers. The proposed $CO_2$ laser based optical fiber reshaping technique shows great consistency, and thus is suitable for commercial applications.

• The Journal of the Korea Contents Association
• /
• v.17 no.6
• /
• pp.408-414
• /
• 2017

This paper aims to investigate the value and resilience of Nogeoldae which was written at the end of Koryo dynasty and has been used as the most important foreign language education materials throughout the 500 years of Chosun dynasty. To this end, 106 volumes of dialogues, 12 of meeting, 17 of lodging, 21 of Daedo bound, 34 of Daedo lives and 11 of return in Nogeoldae are analyzed by an average length of the sentences, an average length of words, type-token ratio, number of words before main verbs and number of words before nouns to identify the progressive degree of the complexity. The result of the analysis shows that Nogeoldae presents a desired progressive complexity found in modern foreign language textbooks.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.2
• /
• pp.181-191
• /
• 2006

NFI-C null mice demonstrated aberrant odontoblast differentiation and thus abnormal dentin formation while other tissues/organs in the body, including ameloblasts, appear to be unaffected and normal. However little is known about the mechanism of NFI-C function in odontoblast differentiation and dentin formation. Odontoblasts are tall, highly polarized cells that are responsible for formation and maintenance of the predentin and dentin. An indication of their polarity is the acquisition of specialized intercellular junctions. As preodontoblasts differentiate into odontoblasts, they are Joined and attached at the apical end by well developed terminal webs of cytoskeletal actins, and associated tight as well as adherent njunctions. In this study, in order to investigate if disruption of the NFI-C gene interferes with formation of a specific or other structural proteins of the intercellular junctions, we examined morphological characteristic of the aberrant odontoblast in NFI-C null mice using light and electron microscope. In addition, we determined the expression of major structural proteins of intercellular junctions, ZO-1 and occludin, during the differentiation of odontoblasts using immunohitochemistry. The results were as follows : 1. In light microscopy, abnormal odontoblasts of incisors of the NFI-C null mice were round in shape, lost their polarity, and trapped in osteodentin-like mineralized tissue. Mutant molars have relatively normal crowns, but short and abnormal differentiating adontoblasts in root formation area. 2. Electron microscopy of abnormal odontoblasts revealed the dissociation of the round osteoblast-like cells, the loss of their cellular polarity, and the absence of an intercellular junctional complex known as the tight junctions. 3. A mutant incisor showed labeling for ZO-1 at the proximal and distal ends of secreting ameloblasts, while staining for ZO-1 was not observed in the abnormal odontoblasts. 4. A normal incisor showed immunoreactivity for occludin in the differentiating odontoblasts. However, staining for occludin was not observed in the abnormal odontoblasts of mutant incisor. These results suggest that NFI-C gene causes dissociation of odontoblast and thus abberant odontoblast differentiation and abnormal dentin formation by interfering with the formation of intercellular junctions.

• The Journal of the Korea Contents Association
• /
• v.20 no.7
• /
• pp.352-367
• /
• 2020

This study critically reviewed whether the South Korean press reported the issue of conflict between South Korea and Japan in a way consistent with their journalistic values. To this end, this study conducted frame analysis and textual analysis for the articles of three press(Chosun Ilbo, Hankyoreh and KBS) from the three major branches of conflict (Korea's Supreme Court's ruling on forced labor compensation in October 2018, the Japanese government's decision to regulate exports in July 2019 and the Korean government's decision to end GSOMIA in August 2019) to one week. There were many superficial reports of simply relaying conflicts around the occurrence and outcome of events, and there were few reports that analyzed the context in depth or suggested alternatives. And partisan reporting, which is cited as a key issue in the Korean journalism, has been strongly revealed in the midst of a conflict between Korea and Japan, a national emergency situation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.2
• /
• pp.210-230
• /
• 1995

To compare the wear resistance of four kinds of commercial acrylic resin teeth [SR-Orthosit PosterioresR(Ivoclar Co., Liechtenstein), Endura PosteriorR(Shofu Inc. Japan), trubyte IPN teethR(Dentsply International Inc., York,), Trubyte BiotoneR(dentsply Inermational Inc. Brazil) by means of the toothbrush abrasion method, the artificial resin teeth were embedded in epoxy resin with the occlusal surfaces aligned in one plane for a total of 40 blocks. There after, each lock was mounted in the arm of the toothbrush abrasion machine(K 236, Japan). Wear measurements were made on the three preconditioned states. Those were as follows : no treatment specimens, thermocycled specimens, and thermocycled specimens which were immeresed applied load of 400g during the buring the brushing cycle. At the end of the 30,000-stroke cycle, each specimen was removed, and weighed. The microhardness of four kinds of commercial resin teeth were determined by means of microhardness tester. Microhardness tests were performed on te no treatment specimens, thermocycled specimens, and thermocycled specimens with immersion in the denture cleansing solution. Finally, the comparison of thermal properties were perfomed using differential scanning calorimeter(DSC-1500). The following results were obtained : 1. In the case of no treatment teeth, the wear amount of endura Posterior(EN) was the greatest among the others(p<0.01), and the wear amount of three kinds of artificial resin teeth was increased in the order of Trubyte IPN teeth(IN), Trubyte Biotone(BN), SR-Orthosit Posteriores(SN) but there was no statistic significance(p>0.01). 2. The wear amount of Trubyte IPN teeth(IT) and Trubyte Biotone(BT), was increased due to thermocycling effect, but that of Endura Posteriores(ET) was decreased conversely(p<0.01). 3. Except for the SR-Orthosit Posteriores(STC), the wear amount of three kinds of artificial resing teeth(that is, ETC, ITC, BTC) was increased due to denture cleansing solution$(Cledent^R)$, but there was no statistic significance(p>0.01). But the wear amount of the SR-Orthosit Posteriores(STC) was the greatest among the others(p<0.01). 4. The wear amount of toothbrush was the greatest in case of contact with occlusal surface of SROrthosit Posteriores resin teeth(p<0.01). 5. the microhardness values(KHN) of the SR-Orthosit Posteriores was the highest among the experimental artificial resin teeth(p<0.01). 6. There was no relationship between microhardness valuse(KHN) and wear amount of four kinds of experimental artificial resin teeth(p<0.01). 7. The differential canning calorimetric property of four kinds of artificial resin teeth did not show endothermal or exothermal peak in the range of $100^{\circ}C$

• Economic and Environmental Geology
• /
• v.2 no.1
• /
• pp.1-12
• /
• 1969

In the Sangdong Mine area, Taebaegsan series (Pre-Cambrian) and Chosun System (Cambro-ordovician) are widely distributed. The Chosun System consists of Yangdug Series (Jangsan Quartzite and Myobong Slate) and The Great Limestone Series (Pungchon Limestone, Shesong Shale, Hwajeol Formation and Dongjeom Quartzite). The mineralized zone containing the main ore body of the Sangdong Mine was developed in the Myobong Slate formation. The result of the field and microscopic study on the mineral paragenesis and it's wall rock alteration in the tungsten ore deposit shows the following features. The orogenic movements of the Post-Chosun System in the Hambaeg Geosyncline are closely related to the tungsten ore deposition in the area, the ore minerals are composed mainly of scheelite, powelite molybdenite and sulfide minerals, and gangue minerals are hornblende, diopside, garnet, quartz, phlogopite, tremolite, biotite, muscovite, fluorite, etc., main ore body was enriched by scheelite bearing quartz vein filling into interstices of formerly mineralized zones, and the minor faults, faults of N $60^{\circ}-70^{\circ}W$, $45^{\circ}-60^{\circ}NE$ and joints, which were formed at the end of the mineralization and the slate. Country rock of the ore body was altered into the following several zones from the outside to the inside; lowgrade recrystalline aureole, silicified sericite zone, and diopside-hornblende zone. Under the microscopic observation of 195 samples taken from throughout ore body can be classified into 10 different groups by their mineral paragenesis as shown in table 2. The garnet-diopside group is primary skarn and it shows gradational change to the groups of later stage by the successive processes of metasomatism. From the stage of quartz-bearing group, the dissemination of scheelite is seen. The crystallization of scheelite in the bed started with the quartz deposition and continued to the last stage when quartz vein intruded into the main ore body. In the field and the under ground investigation a durable limestone bed in thickeness about 20 meters and their remnants in ore body are observed and under microscope calcite remnants are recognized. Hence it is posturated that the ore material moved up through the faults, shear zones or feather cracks and was assimilated with the interbeded limestone, after that the body was affected by the successive differentiated ore solution by gradational increasing in $SiO_2$, $K_2O$ and $H_2O$. Evidently this ore deposit shows the features resulted from pyrometasomatic processes.

• Journal of Distribution Science
• /
• v.11 no.6
• /
• pp.51-58
• /
• 2013

Purpose - Nowadays, more than ever before, fierce competition, deep market segmentation, short product life cycles, and intensifying customer needs are putting increasing pressure on franchise's organizations to satisfy their customers by creating market-oriented relationships with and enhancing their market knowledge of them. One way that this might be achieved is by establishing deep ties (i.e., job commitment and job satisfaction) with their employees. Therefore, the purpose of this study is to examine how two important constructs of franchises' strategic efforts, LO (learning orientation) and RMO (relationship marketing orientation), affect job satisfaction, given the mediating role of job commitment. A franchise system comprises a set of contractual arrangements by which mutual obligations are performed. An organizational learning goal motivates employees to improve their abilities and master the tasks they perform. Relationship marketing, in addition, is to identify, establish, maintain, and enhance relationships with customers and other stakeholders to ensure that the objectives of all parties are met and this is done through the mutual exchange of promises. In a relationship marketing orientation, then, a firm creates, maintains, and enhances a strong relationship with its customers by sustaining long-term ties. This study was designed to examine the evolution of various theoretical approaches to franchise systems in order to determine whether theories about firms have significantly affected the franchise system. To this end, the authors developed a structural model consisting of several constructs. Previous studies have suggested that franchises' learning and relationship marketing orientations are important occupational immersion dimensions driving job satisfaction. Research design, data, methodology - We empirically tested a process of how the learning orientation and the relationship marketing orientation influence job commitment and job satisfaction using survey data drawn from 150 responding franchisees who were interviewed about their individual tendencies. Results - The results of this study provide empirical evidence that learning orientation, relationship marketing orientation, and job commitment all influence franchisees' job satisfaction. The results of this study indicate that, first, learning orientation had a significant effect on job satisfaction; second, relationship marketing orientation was positively related to job commitment; third, job commitment had a significant effect on job satisfaction. We also found that relationship marketing orientation and job satisfaction were mediated by job commitment. Conclusions - The findings of this study confirm the importance of learning orientation and relationship marketing orientation in maintaining a positive marketing relationship between franchiser and franchisee from to the perspective of the market. This indicates that franchiser support such as educational programs provided by the franchiser will help franchisees attain higher business management achievement and satisfaction. Moreover, a positive relationship between franchisees and consumers can be maintained through tie effects. Our findings also suggest that learning orientation plays a critical role in job satisfaction within the franchise system.

• The korean journal of orthodontics
• /
• v.37 no.2 s.121
• /
• pp.137-149
• /
• 2007

Objective: The purpose of this study was to compare changes in frictional resistance between the bracket and wire under dry and wet conditions according to a change in moment. Methods: A stainless steel bracket of $0.022"{\times}0.028"$ slot, and $0.019"{\times}0.025"$ stainless steel, beta-titanium, and nickel-titanium wires were used. A 10 mm length lever was attached to the test (sliding) brackets to generate a moment. The experimental model was designed to allow tipping until contacts were established between the wire and the mesiodistal edges of the bracket slot. The moment was generated by suspending a 100 g or 200 g weight on the end of the lever. The moments applied were $1000g{\cdot}mm\;(100g{\times}10mm)\;and\;2000g{\cdot}mm\;(200g{\times}10mm)$. The test brackets were ligated with elastomeric ligature for a constant ligation force and the fixed brackets were ligated with stainless steel ligature. Brackets were moved along the wire by means of an universal testing machine, and maximum frictional resistances were recorded. Results: Stainless steel wire showed least frictional resistance and there was no significant difference between beta-titanium and nickel-titanium except at $2000g{\cdot}mm$ moment in wet conditions. Frictional resistance of all wires increased as the moment increased from $1000g{\cdot}mm\;to\;2000g{\cdot}mm$. Under wet conditions, the frictional resistance of stainless steel wires increased in both $1000g{\cdot}mm\;and\;2000g{\cdot}mm$ moment conditions, but frictional resistance of nickel-titanium and beta-titanium increased only in $2000g{\cdot}mm$ conditions. Conclusion: These results indicated that various conditions influence on frictional resistance. Therefore, laboratory studies of frictional resistance should simulate clinical situation.