• 한국식생활문화학회지
• /
• 제27권5호
• /
• pp.496-504
• /
• 2012

The objective of this study was to investigate the phasic characteristics of the adjustment process to Korean food with an analysis of Japanese independent tourist culture social resistance factors. To collect data for empirical study, a survey was distributed to 284 Japanese tourists through Korean travel agencies. Logistic regression analysis was carried out in order to determine media and cultural beliefs affecting the diffusion process of Korean food. The results showed that cultural beliefs had no significant effects on the diffusion process of most Korean food. However, people who valued similarities between the two countries-South Korea and Japan-demonstrated a significant effect on performance and identification group. Therefore, cultural beliefs did not influence the diffusion of Korean food, although there are surely cultural beliefs and subjective factors affecting their reform decisions.

• 한국토양환경학회지
• /
• 제1권2호
• /
• pp.83-90
• /
• 1996

토양내에서의 가스나 증기상의 오염물질의 이동은 여러 가지 현상에 의해서 일어나고 있으나 농도차에 의해서 일어나는 확산이 가장 중요하다. 그런데 토양내에서의 확산은 토양 입자들로 인한 확산 부피의 감소, 또 확산경로의 불규칙성, 확산 경로에 있어서 단면적의 변화 등으로 인해 대기중에서 일어나는 확산과는 다른 면을 보인다. 본 논문에서는 이러한 현상을 설명하기 위하여 흔히 사용되는 굴절계수(toruosity), 유효확산계수(effective diffusion coefficient)의 서로 다른 그러나 같은 이름으로 사용되는 많은 정의들과 다양한 수학적 모델들에 대한 비교 검토가 이루어졌다. 굴절계수나 유효확산계수를 사용할 때는 각각의 경우 정의와 각 식의 특징에 대하여 세밀한 검토와 주의가 행하여져야 한다.

• 대한전자공학회논문지SD
• /
• 제41권6호
• /
• pp.25-31
• /
• 2004

본 논문에서는 나노 스케일 확산 공정 모사를 위한 방법으로 동력학적 몬테칼로(kinetic Monte Carlo)를 소개하고자 한다. 먼저 동력학적 몬테칼로의 이론과 배경을 살펴보고 실제적인 이해를 돕기 위하여 실리콘 기판에 이온(전자) 주입 후 열처리과정에서 일어나는 점결함의 확산을 동력학적 몬테칼로를 이용하여 모사하는 간단한 예를 보여주고 있다. 동력학적 몬테칼로는 몬테칼로의 일종이지만 기존의 몬테칼로에서 구현하지 못하였던 물리적인 시간을 포아송 확률 과정을 통하여 구현하였다. 동력학적 몬테칼로 확산 공정 모사에서는 연속 확산 미분 방정식의 해를 구하는 기존의 유한 요소 수치 해석적 방법과 달리원자 상호간 혹은 원자와 결함 또는 결함들 간의 화학적 반응과 입자들의 확산 과정을 포아송 확률 과정에 따라 일어나는 화학적 반응, 입자들의 확산 사건의 연속으로 본다. 사건마다 고유의 사건 발생 확률을 갖고 이 사건 발생 확률에 따라 일어나는 확률적 사건의 연속적 발생으로 실제의 반도체 확산 공정을 시간에 따라 직접적으로 모사할 수 있다. 입자들 간의 화학적 반응 사건 확률과 입자들의 확산 공정에 필요한 확률적 인자들은 분자 동역학, 양자 역학적 계산, 흑은 실험으로 얻어진다.

• Computers and Concrete
• /
• 제3권2_3호
• /
• pp.103-122
• /
• 2006

Drying shrinkage of concrete occurs due to the loss of moisture and thus, it is controlled by moisture diffusion process. On the other hand, the shrinkage causes cracking of concrete and affects its moisture diffusion properties. Therefore, moisture diffusion and drying shrinkage are two coupled processes and their interactive effect is important for the durability of concrete structures. In this paper, the two material parameters in the moisture diffusion equation, i.e., the moisture capacity and humidity diffusivity, are modified by two different methods to include the effect of drying shrinkage on the moisture diffusion. The effect of drying shrinkage on the humidity diffusivity is introduced by the scalar damage parameter. The effect of drying shrinkage on the moisture capacity is evaluated by an analytical model based on non-equilibrium thermodynamics and minimum potential energy principle for a two-phase composite. The mechanical part of drying shrinkage is modeled as an elastoplastic damage problem. The coupled problem of moisture diffusion and drying shrinkage is solved using a finite element method. The present model can predict that the drying shrinkage accelerates the moisture diffusion in concrete, and in turn, the accelerated drying process increases the shrinkage strain. The coupling effects are demonstrated by a numerical example.

• 한국경영과학회지
• /
• 제40권4호
• /
• pp.107-121
• /
• 2015

Diffusion of innovation is the process in which an innovation is communicated through certain channels over time among the members of a social system. The literatures have emphasized the importance of interpersonal network influences on individuals in convincing them to adopt innovations and thereby promoting its diffusion. In particular, the behavior of opinion leaders who lead in influencing others' opinion is important in determining the rate of adoption of innovation in a system. Centrality has been recognized as a good indicator that quantifies a node's influences on others in a given network. However, recent studies have questioned its relevance on various different types of diffusion processes. In this regard, this study aims at examining the effect of a node exhibiting high centrality on expediting diffusion of innovations. In particular, we considered the situation where two innovations compete with each other to be adopted by potential adopters who are personally connected with each other. In order to analyze this competitive diffusion process, we developed a simulation model and conducted regression analyses on the outcomes of the simulations performed. The results suggest that the effect of a node with high centrality can be substantially reduced depending upon the type of a network structure or the adoption thresholds of potential adopters in a network.

• 전자공학회논문지D
• /
• 제35D권1호
• /
• pp.84-93
• /
• 1998

Planar graded index optical waveguides have been formed by Ag$^{+}$ ion exchange in the BK7 optical glass. The experimental results of diffusion and modal characteristics of Ag$^{+}$-Na$^{+}$ exchanged BK7 glass waveguides are presented. Measurements of the mode indices have been measured. We found the relations between the process and device parameters such as the diffusion depth and the square root of the diffusion time, diffusion coefficient and diffusion temperature, and diffusion ion concentration and surface index change. A theoretical gaussian function refractive index profile matched best with the measured data for all the guided modes. The empirical relations between the process and the device parameters are derived and subsequently used to formulate a systematic procedure for fabricating singlemode and multimode waveguides.uides.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.66-69
• /
• 2000

In order to analyze the densification behaviour of stainless steel powder compacts during hot isostatic pressing (HIP) at elevated temperatures, a power-law creep constitutive model based on the plastic deformation theory for porous materials was applied to the densification. Various densification mechanisms including interparticle boundary diffusion, grain boundary diffusion and lattice diffusion mechanisms were incorporated in the constitutive model, as well. The power-law creep model in conjunction with various diffusion models was applied to the HIP process of 316L stainless steel powder compacts under 50 and 100 MPa at 1125 $!`\acute{\dot{E}}$. The results of the calculations were verified using literature data It could be found that the contribution of the diffusional mechanisms is not significant under the current process conditions.

• Corrosion Science and Technology
• /
• 제18권3호
• /
• pp.102-109
• /
• 2019

The hydrogen diffusion and trapping model with a numerical finite difference method (FDM) was modified and extended to accommodate $H_2S$ corrosion and scale forming processes of high-strength steel under tensile stress condition. The newly proposed diffusion model makes it possible to clearly understand combined effect of tensile stress and $H_2S$ corrosion process on hydrogen diffusion behaviors. The core concept of this theoretical approach is that overall diffusion behavior is separated into diffusion process through two respective layers: an outer sulfide scale and an inner steel matrix. Diffusion coefficient values determined by curve-fitting permeation data reported previously with the newly proposed diffusion model indicate that the application of tensile stress can contribute to continual increase in the diffusivity in the sulfide scale with a high density of defect. This suggests that the scale with a lower stability under the stress condition can be a key parameter to enhance hydrogen influx in the steel matrix. Consequently, resistance to hydrogen assisted cracking of the steel under tensile stress can be decreased significantly.

• 한국정보시스템학회지:정보시스템연구
• /
• 제10권1호
• /
• pp.97-126
• /
• 2001

Object-orientation has been proposed as a promising software process innovation to improve software productivity and quality. It has not been understood clearly, however, what factors influences the diffusion of object-oriented technology in organizations. A research model was formulated and hypotheses were generated based on the literature of information technology implementation and software process innovation. To test the research hypotheses, a questionnaire survey was conducted. The results based on 121 responses from Korean companies revealed that project characteristics, use of external experts, and number of development projects are significantly related to the diffusion of object-oriented analysis and design and object-oriented programming. Innovation champion is positively related to the diffusion of object-oriented analysis and design, whereas it is not related to the diffusion of object-oriented programming language. Only project complexity was significantly related to the diffusion of visual programming language. On the other hand, organizational size was not significantly related to any object-oriented technology in this study.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제14권2호
• /
• pp.84-90
• /
• 2014

This paper presents the results of three-dimensional face point cloud smoothing based on a modified anisotropic diffusion method. The focus of this research was to obtain a 3D face point cloud with a smooth texture and number of vertices equal to the number of vertices input during the smoothing process. Different from other methods, such as using a template D face model, modified anisotropic diffusion only uses basic concepts of convolution and filtering which do not require a complex process. In this research, we used 6D point cloud face data where the first 3D point cloud contained data pertaining to noisy x-, y-, and z-coordinate information, and the other 3D point cloud contained data regarding the red, green, and blue pixel layers as an input system. We used vertex selection to modify the original anisotropic diffusion. The results show that our method has improved performance relative to the original anisotropic diffusion method.