• Communications for Statistical Applications and Methods
• /
• v.30 no.6
• /
• pp.631-652
• /
• 2023

In the two-condition within-subject mediation design, pairs of variables such as mediator and outcome are observed under two treatment conditions. The main objective of the design is to investigate the indirect effects of the condition difference (sum) on the outcome difference (sum) through the mediator difference (sum) for comparison of two treatment conditions. The natural condition variables mean the original variables, while the rotated condition variables mean the difference and the sum of two natural variables. The outcome difference (sum) is expressed as a linear model regressed on two natural (rotated) mediators as a parallel two-mediator design in two condition approaches: the natural condition approach uses regressors as the natural condition variables, while the rotated condition approach uses regressors as the rotated condition variables. In each condition approach, the total indirect effect on the outcome difference (sum) can be expressed as the sum of two individual indirect effects: within- and cross-condition indirect effects. The total indirect effects on the outcome difference (sum) for both condition approaches are the same. The invariance of the total indirect effect makes it possible to analyze the nature of two pairs of individual indirect effects induced from the natural conditions and the rotated conditions. The two-condition within-subject design is extended to the addition of a between-subject moderator. Probing of the conditional indirect effects given the moderator values is implemented by plotting the bootstrap confidence intervals of indirect effects against the moderator values. The expected indirect effect with respect to the moderator is derived to provide the overall effect of moderator on the indirect effect. The model coefficients are estimated by the structural equation modeling approach and their statistical significance is tested using the bias-corrected bootstrap confidence intervals. All procedures are evaluated using function lavaan() of package {lavaan} in R.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.5
• /
• pp.1-17
• /
• 2014

Research was initiated to investigate early establishment characteristics and germination pattern of Kentucky bluegrass (KB, Poa pratensis L.) under natural room temperature and to analyze differences between alternative and natural conditions for a practical application. Fifteen cultivars of KB were evaluated in the study. Daily and cumulative germination pattern were measured and analyzed on a daily basis. Differences were observed in germination percentage, germination pattern, days to the first germination and days to 75% germination. Germination percentage was variable with cultivars at the end of study. It was 75.75 to 90.25% under natural condition. There were considerable variations in early germination characteristics and germination pattern among KB cultivars according to germination conditions. The first germination in all entries tested was initiated between 6 and 9 DAS (days after seeding) under ISTA (International Seed Testing Association) condition. But it was observed between 9 and 12 DAS under natural condition, being 3 to 5 days later as compared with ISTA condition. On the first date of a germinating process, the germination rate was 0.25% to 25.00% under ISTA condition, while 0.50% to 13.25% under natural condition. Days to the 75% germination were 15.08 to 28.80 DAS under ISTA condition and 17.78 to 28.75 DAS under natural condition. Midnight II, Excursion and Midnight were the fastest cultivars under ISTA condition, while Odyssey the fastest one under natural condition. Regardless of germination condition, the slowest cultivar was Voyager II, being over 4 weeks to 75% germination percentage. For the most cultivars, days to 75% germination under natural room temperature condition were 1 to 8 days slower than under ISTA condition. From this study information on differences in germination characteristics and pattern among cultivars would be usefully applied for KB establishment such as golf course construction. Prior to on-site seeding, a comprehensive germination test is practically recommended due to a possible decline in germination capability during domestic distribution and storage after import.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.1
• /
• pp.70-77
• /
• 2015

This paper develops and evaluates a mechanical machining process which involves drilling on PVS material. According to the material, two treatment experiments were conducted, one involving drilling in a wet condition or using a lubricant and one involving drilling in a dry condition with no lubricant. Drilling in a dry condition showed better performance in terms of the cutting time than in the wet condition. Otherwise, the wet condition has several advantages. The lubricant influenced the burr diameter size and minimized the temperature on the surface of the work piece. During the wet condition drilling process, a smaller burr diameter size was noted as compared to the dry condition. The temperature showed a linear correlation with the drill bit size, where a least-square analysis provided an $R^2$valuewhichexceeded 0.95. The wet condition required more cutting time than the dry condition. In this condition, the water provides a lubrication effect. A thin layer between the cutting edges and the surface of the work piece is formed. The chip formation is affected by the drilling depth. The color on the tips of the chips was darker than in the initial condition. No correlation between the drilling depth and the bore roughness was noted, but the variation of the cutting speed or the RPM influenced the roughness of the bore. The optimum cutting speed ranged from 40 RPM to 45 RPM in the condition which provided the finest roughness surface.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.1
• /
• pp.26-32
• /
• 2012

Polishing is one of the important methods in manufacturing of Si wafers and in thinning of completed device wafers. This study will report the characteristic of wafer according to processing time, machining speed and pressure which have major influence on the abrasion of Si wafer polishing. It is possible to evaluation of wafer abrasion by load cell and infrared temperature sensor. The characteristic of wafer surface according to processing condition is selected to use a result data that measure a pressure, machining speed, and the processing time. This result is appeared by the characteristic of wafer surface in machining condition. Through that, the study cans evaluation a wafer characteristic in variable machining condition. It is important to obtain optimal condition. Thus the optimum condition selection of ultra precision Si wafer polishing using load cell and infrared temperature sensor. To evaluate each machining factor, use a data through each sensor. That evaluation of abrasion according to variety condition is selected to use a result data that measure a pressure, machining speed, and the processing time. And optimum condition is selected by this result.

• The Mathematical Education
• /
• v.55 no.2
• /
• pp.233-249
• /
• 2016

In this study, we extracted the background meaning of the condition that four points lie on a circle, analyzed textbooks critically and proposed the orientation to improve the content in the textbook. As results, the condition has a realistic background meaning which is 'mathematical modeling of finding a fair location'. The condition has a mathematical background meanings which are 'a first complex situation distinguished from two points and three points', 'the condition described in the perspective of side and angle in order to overcome the disadvantages of the perpendicular bisectors context' and 'being possible to transfer more than five points'. However it is difficult to understand the reason why the condition is on four points in the current textbook. In addition, it is difficult to recognize the connectivity of a circumcenter of triangle. To overcome these problems, we proposed five orientations to improve the content in the textbook.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.946-949
• /
• 2005

It is very a time-consuming and error-prone process to obtain the optimal injection condition, which can produce good injection molding products in some operational variation of facilities, from a seed injection condition. This study proposes a new approach to search the optimal injection molding condition using a neural network and a genetic algorithm. To estimate the defect type of unknown injection conditions, this study forces the neural network into learning iteratively from the injection molding conditions collected. Major two parameters of the injection molding condition - injection pressure and velocity are encoded in a binary value to apply to the genetic algorithm. The optimal injection condition is obtained through the selection, cross-over, and mutation process of the genetic algorithm. Finally, this study compares the optimal injection condition searched using the proposed approach. with the other ones obtained by heuristic algorithms and design of experiment technique. The comparison result shows the usability of the approach proposed.

• IE interfaces
• /
• v.18 no.1
• /
• pp.73-81
• /
• 2005

Injection molding has been widely used in producing plastic parts in large quantities. However, its productivity mainly depends on the expertise and experience of skilled workers because of the difficulty and complexity to determine a robust injection molding condition which is not influenced by the minor operational variation of an injection molding machine and produces good parts continuously. This study analyzes the defect types of the parts and proposes a support system to assist users in determining the robust process condition. The support system calculates the start condition from the information of an injection mold, the injection molding machine, the resin used, and the part. Through the iterative step which updates the condition using the defect information of the part tested, users can obtain the initial condition which produces the part without any problem for the first time. The support system also assists users in obtaining the robust condition from the initial condition using the technique of experimental design. To prove the validity of the support system, this study implements it in the control panel of the injection molding machine.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.42
• /
• pp.109-132
• /
• 2009

The purpose of the introduction of this article is as follows. It was frequent to put a condition on the letter of credit without stating corresponding document. But these attempts are very dangerous to the letter of credit operation. That is, if these types of conditions would be permitted in letter of credit, the independence principle must be collapsed. So these conditions must be disregarded in order to safeguard the independence principle. It is why UCP600 article 14(h) writes that if a Credit contains a condition without stating the document(s) to be presented in compliance therewith, banks will deem such conditions as not stated and will disregard it. But scope of this article 14 should not be limited by the conditions which do not state the document to be presented in compliance therewith. That is, the purpose of this article is to preserve the independence principle, so, if it is impossible to ascertain satisfaction with a condition, it should be disregarded as the non-documentary condition, even if the condition is included in the letter of credit together with document to be presented. Conclusively, whether or not a condition would be regarded as the non documentary condition depends on whether compliance of such condition is ascertained by presented documents stipulated in the letter of credit.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.203-210
• /
• 2023

In this paper, we develope a stock trading system that automatically buy and sell stocks in Kiwoom Securities' HTS system. The system is made by using Kiwoom Open API+ with the Python programming language. A trading strategy is based on an enhanced system query method called a Condition-Search. The Condition-Search script is edited in Kiwoom Hero 4 HTS and the script is stored in the Kiwoom server. The Condition-Search script has the advantage of being easy to change the trading strategy because it can be modified and changed as needed. In the HTS system, up to ten Condition-Search scripts are supported, so it is possible to apply various trading methods. But there are some restrictions on transactions and Condition-Search in Kiwoom Open API+. To avoid one problem that has transaction number and frequency are restricted, a method of adjusting the time interval between transactions is applied and the other problem that do not support a threading technique is solved by an IPC(Inter-Process Communication) with multiple login IDs.

• Ocean and Polar Research
• /
• v.29 no.4
• /
• pp.339-348
• /
• 2007

In this work, we compared the characteristics of three benthic biotic indices (BPI, AMBI, BIBI) which indicates the health condition of benthic communities in Masan Bay, Korea where anthropogenic impacts have been concentrated. Also we evaluated the usefulness of these benthic indices and some problems if they were applied to the Korean coastal waters. For this we used the macrozoobenthos data collected using van Veen grab ($0.1\;m^2$) at 21 sites in Masan Bay in February and August 2004. Based on the BPI values, two stations in the inner bay were found in a very hard polluted condition and three stations in the middle bay were also in a highly polluted condition. Only one station located in the bay mouth was in a normal condition. The inner bay stations showed very high AMBI values (${\geq}5.0$), indicating a highly polluted condition. The bay mouth station was assessed in a moderately polluted condition. The overall BIBI values in Masan Bay were in the range between 1.0 and 3.0. The inner bay stations showed low BIBI values (${\leq}2.0$) in the severely degraded condition. The bay mouth station with high BIBI value over 3.0 was assessed as a normal condition. All three benthos indices showed that macrozoobenthic communities in the inner bay were in a seriously polluted condition all year round, and macrobenthic faunas in the bay mouth seemed in a bad healthy condition (slightly polluted) based on AMBI during summer season. These three benthic biotic indices showed the similar assessment result, and thus we consider that each of them is a useful tool for the assessment of coastal benthic ecosystems under the organic enrichment in sediment.