• Journal of muscle and joint health
• /
• v.19 no.1
• /
• pp.16-26
• /
• 2012

Purpose: The purpose of this study was to investigate the effects of lumbar stabilization exercise on balance ability in patients with adolescent idiopathic scoliosis. Methods: This study was one group pretest-posttest design. Twenty young idiopathic scoliosis patients were recruited for this study. They had the lumbar stabilization exercise program for 40 minutes a day, three times per week for 3 weeks. The lumbar trunk muscle endurance test and clinical balance tests (functional forward reach, functional lateral reach, Fukuda 50-stepping, one leg standing with eyes open and eyes closed) were measured before and after the lumbar stabilization exercise. Results: There were significant differences between pre-and post-test in absolute value of the difference between right and left lateral reach, distance of Fukud 50-stepping and one leg standing on the each side with eyes closed(p<.05). The results showed that the lumbar trunk muscle endurance significantly increased(p<.05). Conclusion: In this study indicated that the lumbar stabilization exercise was effective on balance ability and lumbar trunk muscle endurance in patients with young idiopathic scoliosis.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.605-609
• /
• 2001

Low density ceramic supporter was prepared by using fly ash as a starting material for the application to the biological aerated filter (BAF) system, and the effect of additives and sintering atmosphere on the apparent and bulk density of the carrier was examined. Borax, Na$_2$O and glass powders were added to produce liquid phase. The density of the supporter decreased as the amount of borax increased. The bulk density of 0.79 g/㎤ and the apparent density of 1.10 g/㎤ were obtained when the fly ash with 15% of borax was sintered at 116$0^{\circ}C$ for 15 minutes. The density also decreased as the plate glass powders past through 22${\mu}{\textrm}{m}$ size were mixed. When the fly ash with 12% of grass powder was sintered at 128$0^{\circ}C$ for 10 minutes, the bulk and apparent density were 0.90g/㎤ and 1.00 g/㎤, respectively. Apparent density of 1.6~1.8g/㎤ was obtained when the fly ash was sintered at 120$0^{\circ}C$ in a weak reducing atmosphere. By maintaining the reducing atmosphere and sintering at a high heating rate, the liquid phase was farmed from the reduced composition of fly ash. This resulted in the formation of closed pores that enabled the low apparent density.

• Journal of Chest Surgery
• /
• v.8 no.2
• /
• pp.81-88
• /
• 1975

Up to October 31, 1975, 34 cases of atrial septal defect, secundum type, operated in this department, were presented. This is 23.2% of all congenital heart diseases, operated utilizing cardiopulmonary bypass, in this department during this period [34 out of 146]. Out of 34 cases, 32 cases are pure ostium secundum type and one case is sinus venosus and another one is ostium secundum type with partial anomalous pulmonary venous drainage. Six cases of endocardial cushion defect and 3 cases of trilogy of Fallot are excluded in this report. All 34 cases are repaired under direct vision utilizing extracorporeal circulation. Among 34 cases of atrial septal defect, 16 cases are male, and 18 cases are female. Their ages range between 3 to 48 years, but over 59% of the cases are below the ages of 20 years. Thirty-two cases are repaired by direct sutures while 2 cases are repaired with Teflon patches. The average perfusion time is 30 minutes; the shortest 12 and the longest 81 minutes. The number of the defect is single in 31 cases, double in 2 cases, triple in one case. But the associated defect except the main defect are so small as can be closed by simple direct suture. The size of the defect is average $12cm^2$; the smallest 0.7 and the largest $25cm^2$. The surgical mortality is 2 cases [5.6%] and other cases are found to be excellent in the follow up studies.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.3
• /
• pp.255-262
• /
• 2014

PURPOSE: This study was to investigate the effectiveness of TENS on balance in stroke patients by analyzing some components such as foot pressure, limit of stability and velocity sway after providing somatosensroy input using TENS. METHODS: Twenty five subjects participated and were randomly divided into two groups, TENS group (n=13) and control group (n=12) by the computer program. Interventions were given to subjects 5 days a week for four weeks. TENS group were treated with TENS for 60 minutes in addition to the conventional therapy which included 30-minute exercise and rehabilitation ergometer training for 15 minutes. Control group performed only conventional therapy. TENS was applied on the skin of soleus, tibialis anterior, tensor fascia latae and vastus medialis in affected side. Foot pressure, limit of stability and velocity sway for balance test were measured using Biorescue. RESULTS: TENS group was significantly increased limit of stability and foot pressure in affected side more than control group. And in eye closed condition, TENS group was significantly decreased velocity sway more than control group. CONCLUSION: The application of TENS is effective to improve the somatosensory input of affected side and to increase the motor function and balance ability.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.4
• /
• pp.484-493
• /
• 2021

Objectives: The purpose of this study is to understand and explain the meaning and nature of post-traumatic stress among industrially injured workers. Methods: In this study, Colaizzi's phenomenological research method and an in-depth interview were used, and data were collected from 8 industrially injured workers among adult men and women over the age of 20, those who are able to express their opinions, have experienced injuries due to industrial accidents, and those who have been injured for more than 6 months who had participated in the study from 1st May 2021 to 30th September. The in-depth interview with research participants took approximately 30 minutes to 90 minutes on average. Results: The research results were classified into five categories, eleven thematic collections, and 27 themes. The Five categories were 'maze with no exit', 'erased existence', 'impenetrable barrier', 'tightly closed iron gate', and 'overcoming reality hurdles'. Conclusions: This study can help understand and describe the experiences of post-traumatic stress among workers who have experienced industrial accidents by taking a phenomenological approach. It suggests the need for program intervention and institutional improvement for psychosocial rehabilitation as well as an institutional approach toward these targets.

• Korean Journal of Materials Research
• /
• v.23 no.4
• /
• pp.240-245
• /
• 2013

Electrochemical surface treatment is commonly used to form a thin, rough, and porous oxidation layer on the surface of titanium. The purpose of this study was to investigate the formation of nanotubular titanium oxide arrays during short anodization processing. The specimen used in this study was 99.9% pure cp-Ti (ASTM Grade II) in the form of a disc with diameter of 15 mm and a thickness of 1 mm. A DC power supplier was used with the anodizing apparatus, and the titanium specimen and the platinum plate ($3mm{\times}4mm{\times}0.1mm$) were connected to an anode and cathode, respectively. The progressive formation of $TiO_2$ nanotubes was observed with FE-SEM (Field Emission Scanning Electron Microscopy). Highly ordered $TiO_2$ nanotubes were formed at a potential of 20 V in a solution of 1M $H_3PO_4$ + 1.5 wt.% HF for 10 minutes, corresponding with steady state processing. The diameters and the closed ends of $TiO_2$ nanotubes measured at a value of 50 cumulative percent were 100 nm and 120 nm, respectively. The $TiO_2$ nanotubes had lengths of 500 nm. As the anodization processing reached 10 minutes, the frequency distribution for the diameters and the closed ends of the $TiO_2$ nanotubes was gradually reduced. Short anodization processing for $TiO_2$ nanotubes of within 10 minutes was established.

• Archives of Plastic Surgery
• /
• v.48 no.3
• /
• pp.261-268
• /
• 2021

Background Various methods have been described to close large meningomyelocele defects, but no technique has been proven superior to others. This study presents cases of meningomyelocele defect closure with a keystone-design perforator island flap. Methods A retrospective study was performed on 14 patients with meningomyelocele defects closed using various types of keystone flaps. Results The median age of the patients at surgery was 10.5 days (range, 1-369 days) and the average defect size was 22.5 cm² (range, 7.1-55.0 cm²). The average operative time for defect closure was 89.6 minutes (range, 45-120 minutes). Type IV bilateral keystone flaps were used for four defects, type IV unilateral flaps for six defects, type IIA flaps for two defects, and type III flaps for two defects. Conclusions All the defects healed completely with no major complications. The keystone-design perforator island flap is a reliable, easy, and fast technique to close large meningomyelocele defects.

• Journal of Korea Soil Environment Society
• /
• v.2 no.2
• /
• pp.73-79
• /
• 1997

Removal of the Arsenic components from the closed mine tailings has been attempted by the alkali-leaching method. Two tailings collected from the Daduck and Yuchon mine which were already closed many years ago were leached with caustic soda solutions. The Arsenic components in the leach liquor resulted from the alkali treatment of tailings could be removed fairly well in the form of insoluble calcium-Arsenic compound by the precipitation with calcium chloride. As a result, the extraction of about 60~90% Arsenic from the tailings could be obtained depending on the leaching conditions and the influence of temperature and the slurry density on the extraction of Arsenic was also found to be very small at the NaOH concentration more than 0.5N. In addition, it seemed that a caustic soda solution over 0.5N NaOH could be used repeatedly for the leaching of tailings since the consumption of NaOH was not so great in a leaching of them. As far as the precipitation of Arsenic components was concerned, more than 99% of Arsenic could be precipitated within 10 minutes by the addition of 2wt% CaC12 in to the leach liquor.

• Journal of Korean Physical Therapy Science
• /
• v.16 no.4
• /
• pp.49-57
• /
• 2009

Background: The purpose of this study was to assess the test-retest reliability of balance measurements in older adults using balance measurement system(Good Balance). Methods: The subjects consisted of 49 female and 20 male in community-dwelling older adults. This study used a repeated-measure design. Each subject completed all the different tests once and they were then repeated with 2 minutes in between. Repeated two-ways analysis of variance(ANOVA), representing two test times and both sexes, was calculated for each of the two dependent variables. Intraclass correlation coefficients(ICCs) were used to assess the test-retest reliability. Results: 1) There was not significant difference between test and retest for mediolateral sway speed and anterioposterior sway speed under conditions of normal standing with eyes open, normal standing with eyes closed and semitandem standing with eyes open. There was not significant difference between males and females for mediolateral sway speed and anterioposterior sway speed under conditions of normal standing with eyes open, normal standing with eyes closed and semitandem standing with eyes open. There were not the interaction effects between genders and test time under three conditions. 2) The reproducibility between test and retest was excellent for anterioposterior sway speed(ICC=.77) under condition of normal standing with eyes open, and for mediolateral sway speed(ICC=.76) and anterioposterior sway speed(ICC=.84) under condition of semitandem standing with eyes open. The reproducibility between test and retest was fair to good for mediolateral sway speed(ICC=.64) under condition of normal standing with eyes open, for mediolateral sway speed(ICC=.63) and anterioposterior sway speed(ICC=.75) under condition of normal standing with eyes closed. Conclusion: Balance tests in older adults using balance measurement system(Good Balance) demonstrated acceptable levels of reliability.

• Resources Recycling
• /
• v.21 no.6
• /
• pp.32-38
• /
• 2012

In this study, direct reduction of $ZrO_2$ using liquid calcium was investigated. The influence of molar ratio of Ca and $ZrO_2$, reaction time and temperature on the reduction behavior of $ZrO_2$ was studied. Experiments were conducted in a closed stainless steel chamber under Ar atmosphere during 5 to 60 minutes. Most of the $ZrO_2$ was reduced to Zr in 5 minutes at 1223 K and 3 Ca/$ZrO_2$ molar ratio. The minimum oxygen content in reduced metal Zr was obtained about 0.66 wt% at 1373 K after 30 minutes and 4 Ca/$ZrO_2$ molar ratio. The morphology of zirconium powder obtained was highly affected by the reaction temperature and reaction time.