• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.5
• /
• pp.359-370
• /
• 2021

Duct slabs, which are used to build ventilation facilities in underground spaces with transverse ventilation system, need to secure fire resistance according to longitudinal and heavy vehicle traffic of tunnels. This study measured the temperature change at the construction joint of the precast fireproof duct slab which integrates fire resistance material and duct slab under the RWS fire scenario. As a result, it was confirmed that if there is no reinforcement of the construction joint, damage will occur in concrete inside the construction joint, leading to damage to the fireproofing layer. On the other hand, when one side of the construction joint was reinforced with fireproofing materials, it showed more than three times the fire resistance performance compared to when there was no reinforcement. At this time, cross-sectional losses of concrete and fireproofing layer were shown in blocks without reinforcement, but no damage was seen in the reinforced blocks.

• Korea Trade Review
• /
• v.43 no.5
• /
• pp.159-177
• /
• 2018

The container shipping sector is an important international logistics operation that connects open economies. Freight rates rapidly change as the market fluctuates, and staff related to the shipping market are interested in factors that determine freight rates in the container market. This study uses the Vector Error Correction Model(VECM) to estimate the impact of factors affecting container freight rates. This study uses data published by Clarksons. The analysis results show a 4.2% increase in freight rates when world container traffic increases at 1.0%, a 4.0% decrease in freight rates when volume of container carriers increases by 1.0%, a 0.07% increase in freight rates when bunker price increases by 1.0%, and a 0.04% increase in freight rates accompanying 1.0% increase in libor interests rates. In addition, if the current freight rate is 1.0% higher than the long-term equilibrium rate, the freight rate will be reduced by 3.2% in the subsequent term. In addition, if the current freight rate is 1.0% lower than the long-term equilibrium rate, the freight rate will decrease by 0.12% in the following term. However, the adjusting power in a period of recession is not statistically significant which means that the pressure of freight rate increase in this case is neglectable. This research is expected to contribute to the utilization of scientific methods in forecasting container freight rates.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.209-221
• /
• 2009

Travel time estimation under given traffic conditions is important for providing drivers with travel time prediction information. But the present expressway travel time estimation process cannot calculate a reliable travel time. The objective of this study is to estimate the path travel time spent in a through lane between origin tollgates and destination tollgates on an expressway as a prerequisite result to offer reliable prediction information. Useful and abundant toll collection system (TCS) data were used. When estimating the path travel time, the path travel time is estimated combining the link travel time obtained through a preprocessing process. In the case of a lack of TCS data, the TCS travel time for previous intervals is referenced using the linear interpolation method after analyzing the increase pattern for the travel time. When the TCS data are absent over a long-term period, the dynamic travel time using the VDS time space diagram is estimated. The travel time estimated by the model proposed can be validated statistically when compared to the travel time obtained from vehicles traveling the path directly. The results show that the proposed model can be utilized for estimating a reliable travel time for a long-distance path in which there are a variaty of travel times from the same departure time, the intervals are large and the change in the representative travel time is irregular for a short period.

• Journal of Internet Computing and Services
• /
• v.7 no.2
• /
• pp.81-92
• /
• 2006

Recently, the number of mobile phone and PDA users has been rapidly increased. Such monitoring and control applications as geographical and traffic information systems are being used widely with wireless devices. In this paper, we introduce the mobile M/VC application framework that supports the rapid constructions of mobile monitoring and control (M/VC) applications. The mobile M/VC application framework uses the mobile Observer/Observable pattern that extends the Java's Observer/Observable for automatic interactions of server and client objects in wireless environments. It also provides the Multiplexer and Demultiplexer classes that supports the assembly feature of Observer and Observable objects. To construct an application using the framework, developers just need to create necessary objects from the Observable and MobileObserver classes and inter-connect them structurally(like the plug-and-play style) through the Multiplexer and Demultiplexer objects. Then, the state change of Observable objects is notified to the connected Observer objects and user's input with Observer objects is propagated to Observable objects. These mechanism is the main process for monitoring and control applications. Therefore, the mobile M/VC application framework can improve the productivity of mobile applications and enhance the reusability of such components as Observer and Observable objects in wireless environments.

• Journal of Digital Convergence
• /
• v.17 no.5
• /
• pp.89-97
• /
• 2019

The purpose of this study was to understand educational changes and effects of cognitive behavioral art therapy using the smart device. The participant of the study was a 4th grade of male elementary school student who had aggressiveness and impulsiveness with emotional instability. The study was conducted one to two times a week for six months with a total of 30 educational sessions. Among 80 minutes per session, 60 minutes of art therapy and 20 minutes of cognitive behavioral therapy were applied, and during the sessions, cognitive action art therapy (drawing and shaping activities), cognitive restructuring, behavioral modification, systemic dullness, social skills training, empathy and landscaping training were applied. For the numeral assessment, Traffic Anxiety Inventory for Children (TAIC), Beck Anxiety Inventory (BAI) and emotional instability measures were used. Research showed that cognitive behavioral art therapy using smart devices had the effect of positive emotional change in children with emotional anxiety, and based on this, future development directions including systematic instructional design, scientific analysis and feedback technologies were discussed.

• Journal of Korean Society of Transportation
• /
• v.32 no.2
• /
• pp.83-92
• /
• 2014

Weather condition is one of the crucial factors affecting travelers' mode choice. Nevertheless, there are numerous indefinite traffic phenomena under various weather conditions. This study was conducted to verify the hypothesis that transit riderships decrease as precipitation increases. To clarify the relationship between precipitation and transit ridership, a seemingly unrelated regression model was employed with data such as daily precipitation and daily transit riderships of 3 transit modes (bus, metro, and shuttle bus) collected in Busan for recent 24 months. The estimation results show that transit riderships decreased as the daily precipitation increased when the daily precipitation is greater or equal to 10mm/day (0.169%, 0.101%, and 0.172% reduction in bus, metro, and shuttle bus riderships, respectively, when the daily precipitation increased by 1mm). When comparing the impact of precipitation on transit riderships by modes using a cross-equation parameter restriction test, the decrease in metro ridership is relatively insensitive to the change in precipitation. However, the negative coefficient of precipitation in the metro ridership estimation model indicates that the transit users in Busan may alter their mode to taxi or automobile and/or may give up the trip itself in bad weather condition.

• Journal of Internet Computing and Services
• /
• v.10 no.1
• /
• pp.19-31
• /
• 2009

Network management involves configuring and operating various network elements in a suitable manner. Generally, a network management system can perform basic functionalities such as configuration management, performance management, and fault management. Due to the open structure of the Internet, the volume of network traffic and the network equipment used have increased in size and complexity. Therefore, it is expensive and time consuming to develop a network management program for heterogeneous network equipment in an SNMP.based network. In order to facilitate the management of network environments and the control of heterogeneous devices in an efficient manner, we propose an Active Network Management System (ANMS) comprising an automatic generator that uses triggers to generate a network management program. The concept of triggers can be represented through event condition action rules performed in response to a change in the status of a network environment. The proposed ANMS comprises basic components for real time network management and also includes an automatic generator (AG). When the ANMS is monitoring network elements that are newly added or changed, a trigger rule is activated and these components are then able to collaborate and automatically generate a new network management program by using the information provided along with the SNMP libraries. Our method is useful for expanding the network structure and replacing network equipment. Through experiments, we have proved that our ANMS is useful when new network objects are added or changed in the network environment to expand the network structure. Further, we have verified that our ANMS system reduces the time and cost required to develop a network management program as compared to the manual method used in existing network management systems.

• International Journal of Highway Engineering
• /
• v.5 no.3 s.17
• /
• pp.31-42
• /
• 2003

The KHC Test Road project was initiated on 1991 to develop Korean Pavement Design Guide. It was constructed along the Joongbu Inland Expressway line between Yeoju and Gamgok. It is two-lane wide expressway containing fifteen asphalt and twenty-five Portland cement concrete test pavement sections. Various sensors were installed in the Test Road to evaluate the behavior of test pavement sections under the influence of traffic load and environmental change. The most important issues in the sensor installation are the accurate location and long-term survivability. They are directly influenced by the sensor installation methodology. The methodology for asphalt strain gages is mainly discussed in this paper because it is the second important sensors in the KHC Test Road project. In order to find the best methodology, we evaluated existing methodology from prior experience and several conducted test installations. We have tried mound, block out, and trench cuts since 2000. Among three methods, block out was the most effective one in terms of accurate location, long-term survivability, and material homogeneity. However, this method cannot be applied to the wearing coarse so that the mound method was used as an alternative. The block out method was applied to base and intermediate layers while the mound method was used to the wearing coarse. Three hundred seventy-four asphalt strain gauges were installed on asphalt pavement sections from September 3rd to November 18th in 2002. According to the sensor measurement evaluation, 6.3% of sensor demonstrated over ranged readings for mound method installation and 2.5% did for block out method installation. We lost only two sensors during the installation. It is 99.5% survival and it is excellent survival rate according to other experience.

• Journal of KIISE:Databases
• /
• v.30 no.3
• /
• pp.296-309
• /
• 2003

One of commercial applications of mobile computing is ATIS(Advanced Traveler Information Systems) in ITS(Intelligent Transport Systems). In ATIS, a primary mobile computing task is to compute the shortest path from the current location to the destination. In this paper, we have studied the shortest path re-computation problem that arises in the DRGS(Dynamic Route Guidance System) in ATIS where the cost of topological digital road map is frequently updated as traffic condition changes dynamically. Previously suggested methods either re-compute the shortest path from scratch or re-compute the shortest path just between the two end nodes of the edge where the cost change occurs. However, these methods we trivial in that they do not intelligently utilize the previously computed shortest path information. In this paper, we propose an efficient approximate shortest path re-computation method based on the dynamic window scheme. The proposed method re-computes an approximate shortest path very quickly by utilizing the previously computed shortest path information. We first show the theoretical analysis of our methods and then present an in-depth experimental performance analysis by implementing it on grid graphs as well as a real digital road map.

• The KIPS Transactions:PartD
• /
• v.14D no.7
• /
• pp.707-718
• /
• 2007

Recently, much studies for providing mobile users with suitable and useful content services, LBS(Location Based Service) corresponding to the change of users' location, are actively going on. First and foremost, this is basically owing to the progress of location management technologies such as GPS, mobile communication technology and the spread of personal devices like PDA and the cellular phones. Besides, the research scope of LBS has been changed from vehicle tracking and navigation services to intelligent and personalized services considering the changing information of conditions or environment where the users' are located. For example, it inputs the information such as heavy traffic, pollution, and accidents. The query languages which effectively search the stored vehicle and environment information have been studied depending on the increase of the information utilization. However, most of existing moving object query languages are not enough to provide a recommendation service for a user, because they can not be tested and evaluated in real world and did not consider changed environment information. In order to retrieve not only a vehicle location and environment condition but also use them, we suggest a moving object query language for recommendation service and implement a moving object query process system for supporting a query language. It can process a nearest neighbor query for recommendation service which considers various attributes such as a vehicle's location and direction, environment information. It can be applied to location based service application which utilizes the recommended factors based on environmental conditions.