• Journal of Biosystems Engineering
• /
• v.13 no.3
• /
• pp.32-43
• /
• 1988

This study was attempted to investigate the pneumatic separation on separating unit of a combine harvester. The aerodynamic characteristics of threshed materials were analyzed by experiments. The air velocity distribution within the separation chamber was measured for various speeds of the winnower and suction fans to find out the operational and design conditions of the separating unit which would serve for reducing the grain loss from chaff outlet. The results of study arc summarized as follows: 1. Based on the separation curve of threshed materials analyzed, it was shown that three different kind. of materials-kernels, straw chaff, and leaf chaff were as a whole able to be separated pneumatically, regardless of varieties. However, a small amount of the separation grain loss may be expected to occur if the complete separation between kernels and straw chaff would be undertaken because some portion of their separation curve were overlapping. 2. The analysis of air velocity distribution showed that the separation chamber may be divided into two regions, the discharging and separating. The air velocity of the discharging region was 5-15 m/s and that of the separating region 2-5 m/s. 3. The air movement of the separation chamber may be a turbulence flow, being its speed became greater as it moves from the left to the right section of the separation chamber. The equi-speed line. of air flow had a steep gradient in between the discharging and the separation regions. The air velocity in the discharging region was much higher than the terminal velocity of kernels, because of which those kernels appearing in the region could be possibly exhausted as the grain loss from the chaff outlet. 4. The motion trajectory of threshed material in the separating region was dominantly affected by the winnower fan, on the other hand, its motion in the discharging region was affected by suction fan. 5. The grain loss from the chaff outlet was affected greatly by the winnower fan and the trace of kernel movement. It was observed that the optimum working speed to give minimum grain loss from chaff outlet for the combine tested should be maintained at 950~1,150 rpm for the winnower fan and 1,850 rpm for the suction fan. 6. It was shown that a large portion of grain loss from chaff outlet may occur when the kernels may bump against a portion of separation chamber wall and those kernels thus scattered into the discharging region were sucked by the suction fan. It was accordingly recommended that a new design of the wall of separation chamber so as to bump down kernels may be necessary to reduce grain loss from the chaff outlet.

• Journal of the Daesoon Academy of Sciences
• /
• v.25_1
• /
• pp.25-85
• /
• 2015

In this study, source criticism (an establishment of authentic text) of the Hyun-Mu Sutra(玄武經) among different editions is studied and an attempt of a new interpretation appropriate to that is attempted. The Hyun-Mu Sutra, a scripture written in 1909, began to communicate with the world through the religions of Jeungsanism. In particular, it was remarkable that The Hyun-Mu Sutra was absorbed as canon textbooks Jeonkyung(典經), the Scriptures of Daesoonjinrihoe, The Fellowship of Daesoon Truth(大巡眞理) from a loner and secret pull-out of heritage traditions. However, this scripture though written in 1909 and more than 100 years has passed, remained in a state unestablished authentic text. The Hyun-Mu Sutra is the scripture consisted of 25 pages by the religions of Jeungsanism[Gang Il-sun 姜一淳(1871~1909)]. 33 page type of Hyun-Mu Sutra has been distributed in the world until now the authentic text of The Hyun-Mu Sutra. However, as a result of the examination, diagnostic scripture(病勢文) was found to have been added by descendants. After a review of authentic text of The Hyun-Mu Sutra, it concluded that there is no diagnostic scripture in primary The Hyun-Mu Sutra. Though The Hyun-Mu Sutra is a booklet of a small amount, the notation and expression is so unique, it has been in secrecy to read its contents. Interpretation way of The Hyun-Mu Sutra up to now can be summarized in two as follows. 1) approaches by I-ching 2) approaches by ten celestrial stemps and twelve earthly branches(10干12支). Approaches by I-ching among this sometimes was supplemented with Buddhist classification methods. Nevertheless, these studies can be evaluated limited because it fails to secure authentic text of The Hyun-Mu Sutra. In this study, the contents of The Hyun-Mu Sutra was examined itemized by focusing on the following four points. 1) The icon of The Hyun-Mu Sutra(玄武經符) is similar as normal talisman(符籍) but it has other features. 2) 'Reverse Fonts'(反書體)[the opposite view of the standard fonts(正書體), reflected in the mirror fonts] and size or location used in text is not in uniform. 3) letters in scripture were pointed and points were stamped in the left and upper and lower characters. 4) "Spiritual poem" (詠歌, the Korean traditional music with a view of elegance as an origin of eco), and the music with the Five-Sounds[宮Gung, 商Sang, 角Gak, 徵Chi, 羽Wu) were related. As a result, content analysis of The Hyun-Mu Sutra is carried out in the next four points. 1) The icon of The Hyun-Mu Sutra (玄武經符) has been primarily developed by Jeungsan. 2) 'Reverse Fonts'(反書體)[the opposite view of the standard fonts(正書體), reflected in the mirror fonts] and reverse location such as '宙宇' [the reverse of '宇宙'] represents based on a new world based on a forward and reverse I-ching(正易). 3) Dot and neighbor points is a symbolic map that guides the position of lateral new world(後天) and era(人尊) 4) Spiritual poem is the entrance to achieve the Realization of Do(道通). The above can be considered as the results of this study.

• Corrosion Science and Technology
• /
• v.7 no.1
• /
• pp.50-60
• /
• 2008

The majority of the described experimental results deal with relatively pure aluminium. Variations were made in the pretreatment of the aluminum substrates and an investigation was performed on the resulting changes in oxide layer composition and chemistry. Subsequently, the bonding behavior of the surfaces was investigated by using model adhesion molecules. These molecules were chosen to represent the bonding functionality of an organic polymer. They were applied onto the pretreated surfaces as a monolayer and the bonding behavior was studied using infrared reflection absorption spectroscopy. A direct and clear relation was found between the hydroxyl fraction on the oxide surfaces and the amount of molecules that subsequently bonded to the surface. Moreover, it was found that most bonds between the oxide surface and organic functional groups are not stable in the presence of water. The best performance was obtained using molecules, which are capable of chemisorption with the oxide surface. Finally, it was found that freshly prepared relatively pure aluminum substrates, which are left in air, rapidly lose their bonding capacity towards organic functional groups. This can be attributed to the adsorption of contamination and water to the oxide surface. In addition the adhesion of a typical epoxy-coated aluminum system was investigated during exposure to water at different temperatures. The coating was found to quite rapidly lose its adhesion upon exposure to water. This rapid loss of adhesion corresponds well with the data where it was demonstrated that the studied epoxy coating only bonds through physisorptive hydrogen bonding, these bonds not being stable in the presence of water. After the initial loss the adhesion of the coating was however found to recover again and even exceeded the adhesion prior to exposure. The improvement could be ascribed to the growth of a thin oxyhydroxide layer on the aluminum substrate, which forms a new, water-stable and stronger bond with the epoxy coating. Two routes for improvement of adhesion are finally decribed including an interphasial polymeric thin layer and a treatment in boiling water of the substrate before coating takes place. The adhesion properties were finely also studied as a function of the Mg content of the alloys. It was shown that an enrichment of Mg in the oxide could take place when Mg containing alloys are heat-treated. It is expected that for these alloys the (hydr)oxide fraction also depends on the pre-treatment and on the distribution of magnesium as compared to the aluminium hydroxides, with a direct impact on adhesive properties.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.5
• /
• pp.395-405
• /
• 2014

Objective: The aim of this study is to investigate 1) somatotopic arrangement of the second and third fingers in SI area 2) difference of neural activation in the SI area produced by stimulation with different frequencies 3) correlation between the intensity of tactile perception by different stimulus intensity and the level of brain activation measurable by means of fMRI. Background: Somatosensory cortex can obtain the information of environmental stimuli about "where" (e.g., on the left palm), "what" (e.g., a book or a dog), and "how" (e.g., scrub gently or scrub roughly) to organism. However, compared to visual sense, the neural mechanism underlying the processing of specific electrotactile stimulus is still unknown. Method: 10 right-handed subjects participated in this study. Non-painful electrotactile stimuli were delivered to two different finger tips of right hand. Functional brain images were collected from 3.0T MRI using the single-shot EPI method. The scanning parameters were as follows: TR and TE were 3000, 35ms, respectively, flip angle 60, FOV $24{\times}24cm$, matrix size $64{\times}64$, slice thickness 4mm (no gap). SPM5 was used to analyze the fMRI data. Results: Significant activations produced by the stimulation were found in the SI, SII, the subcentral gyrus, the precentral gyrus, and the insula. In all participants, statistically significant activation was observed in the contralateral SI area and the bilateral SII areas by the stimulation on the fingers but ipsilaterally dominant. The SI area representing the second finger generally located in the more lateral and inferior side than that of the third finger across all the subjects. But no difference in brain area was found for the stimulation of the fingers by different frequencies. And two typical patterns were observed on the relationship between the perceived psychological intensity and the amount of voxels in the primary sensory cortex during the stimulation. Conclusion: It was possible to discriminate the representation sites in the SI by electrotactile stimulation of digit2 and digit3. But we could not find the differences of the brain areas according to different stimulation frequencies from 3 to 300Hz. Application: The results of the study can provide a deeper understanding of somatosensory cortex and offer the information for tactile display for blinds.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.6
• /
• pp.684-689
• /
• 2007

The aim of this study is to examine the change of the osteoclastic activity in the surrounding bone with or without tooth movement after corticotomy by histologic study. Eighteen male Sprague Dawley rats with an average body weight of 300 g(range 250-350 g) were used. The rats were divided into three groups of six animals. They were operated corticotomy-assisted tooth movement and killed after 1 week, 2 weeks, and 3 weeks after tooth movement. Corticotomy was done in the surrounding of the both upper first molar. A split mouth design was used by referring to the contralateral side as control. After flap suturing, the upper left first molar was moved anteriorly by closed coil spring. The force applied was 1 N. The average of tooth movement of the 1 week group was $0.24{\pm}0.09mm,\;0.20{\pm}0.26mm$ in 2 weeks group and $0.41{\pm}0.39mm$ in 3 weeks group, respectively. The difference between the 1 week and the 2 weeks groups was very small to compare with the 3 weeks group. In the treatment group, the average numbers of cells that positively reacted to TRAP were 14.5 in the 1 week group, 12.0 in the 2 weeks group, and 6.0 in the 3 weeks group. In the control group, the numbers were 8.3 in the 1 week group, 12.8 in the 2 week group, and 1.5 in the 3 week group, respectively. The amount of tooth movement of the 3 week group was about twice as large as those of the 1 week and 2 week groups. From the standpoint of histology, the average number of cells that positively reacted to TRAP was initially larger in the treatment group than in the control group, similar in both group in 2 weeks, and became less in the treatment group in 3 weeks. Additionally, in the control group, their activity of osteoclast was higher in 2 weeks than in 1 week, and decreased rapidly in 3 weeks.

• Analytical Science and Technology
• /
• v.30 no.5
• /
• pp.270-278
• /
• 2017

The absorption of blood onto the surfaces of white cotton, polyester, rayon, and nylon fabrics was studied. Different categories of fabrics (woven and knitted) with diverse thickness, were manually folded twice to obtain four fabric layers, and $100{\mu}L$ of human blood was dropped onto the surface of the fabrics. The amount of blood that penetrated the fabric layer and the shape of bloodstain observed on the fabrics were influenced by the chemistry, thickness, and texture of the fabric. The blood bearing fabrics were left to dry for 3 days, washed by hand using tap water, and Lumiscene was then sprayed onto the fabrics to enhance the latent bloodstain for comparison of the shape of the bloodstain before and after washing by hand. The features of the bloodstain after washing varied greatly with the recipient fabrics. Additionally, stronger luminescence was observed at the surface where the blood was deposited compared to the background. However, it was confirmed that physical contact during the washing can deform the original shape of the bloodstain. The effect of the drying time on the bloodstain after hand washing was also studied. $100{\mu}L$ of blood was dropped on the surfaces of the fabrics and dried for 0, 1, 12, 24, 72 h, and 7 days, then washed by hand, before the bloodstain was enhanced with Lumiscene. The results of this experiment indicated that the increased drying time induces stronger chemiluminescence of Lumiscene. However, after drying of the bloodstain for 7 days, the luminescence of the bloodstain was decreased at the blood deposited site and increased around the blood deposited site.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.119-119
• /
• 2011

This study examined the synthesis of large area graphene and the change of its characteristics depending on the ratio of CH4/H2 by using the thermal CVD methods and performed the experiments to control the electron-hole conduction and Dirac-point of graphene by using chemical doping methods. Firstly, with regard to the characteristics of the large area graphene depending on the ratio of CH4/H2, hydrophobic characteristics of the graphene changed to hydrophilic characteristics as the ratio of CH4/H2 reduces. The angle of contact also increased to 78$^{\circ}$ from 58$^{\circ}$. According to the results of Raman spectroscopy showing the degree of defect, the ratio of I(D)/I(G) increases to 0.42% from 0.25% and the surface resistance also increased to 950 ${\Omega}$ from 750 ${\Omega}$/sq. As for the graphene synthesis at the high temperature of 1,000$^{\circ}$ by using CH4/H2 in a Cu-Foil, the possibility of graphene formation was determined as a function of the ratio of H2 included in the fixed quantity of CH4 as per specifications of every equipment. It was observed that the excessive amount of H2 prevented graphene from forming, as extra H-atoms and molecules activated the reaction to C-bond of graphene. Secondly, in the experiment for the electron-hole conduction and the Dirac-point of graphene using the chemical doping method, the shift of Dirac-point and the change in the electron-hole conduction were observed for both the N-type (PEI) and the P-type (Diazonium) dopings. The ID-VG results show that, for the N-type (PEI) doped graphene, Dirac-point shifted to the left (-voltage direction) by 90V at an hour and by 130 V at 2 hours respectively, compared to the pristine graphene. Carrier mobility was also reduced by 1,600 cm2/Vs (1 hour) and 1,100 cm2/Vs (2 hours), compared to the maximum hole mobility of the pristine graphene.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.654-661
• /
• 2000

Area of greenhouse increases rapidly up to 45,265ha by the year of 1998 in Korea. Hot air heater with light oil combustion is the most common heater for greenhouse heating in the winter season. However, exhaust gas heat discharged to atmosphere through chimney reaches up to 10~20% of total heat of the oil combusted in the furnace. In order to recapture the heat of this exhaust gas and to recycle for greenhouse heating, the heat pipe type exhaust heat recovery system was manufactured and tested in this experiment. The exhaust heat recovery system was made for space heating in the greenhouse. The system consisted of a heat exchanger made of heat pipes, ${\emptyset}15.88{\times}600mm$ located in the rectangular box of $600{\times}550{\times}330mm$, a blower and air ducts. The rectangular box was divided by two compartments where hot chamber exposed to exhaust gas in which heat pipes could pick up the heat of exhaust gas, and by evaporation of the heat transfer medium in the pipes it carries the heat to the cold compartment, then the blower moves the heat to greenhouse. The number of heat pipe was 60, calculated considering the heat exchange amount between flue gas and heat transfer capacity of heat pipe. The working fluid of heat pipe was acetone because acetone is known for its excellent heat transfer capacity. The system was attached to the exhaust gas path. According to the performance test it could recover 53,809 to 74,613kJ/hr depending on the inlet air temperature of 12 to $-12^{circ}C$ respectively when air flow rate $1,100\textrm{m}^3/hr$. The exhaust gas temperature left the heat exchanger dropped to $100^{circ}C$ from $270^{circ}C$ by the heat exchange between the air and the flue gas, the temperature difference was collected by the air and the warm air temperature was about $60^{circ}C$ at the air flow rate of $1,100\textrm{m}^3/hr$. This heat pipe type exhaust heat recovery system can reduce fuel cost by 10% annually according to the economic analysis.

• Korean Journal of Cognitive Science
• /
• v.23 no.2
• /
• pp.225-248
• /
• 2012

The summed-similarity model of visual short-term recognition proposes that the estimated amount of summed similarity between remembered items and a recognition probe determines recognition judgement decision (Kahan & Sekuler, 2002). This study examined the effect of a task-irrelevant location change on the recognition decision against two remembered Gabor gratings differing in their spatial frequencies. On each trial in Experiment, participants reported if two gratings displayed across the visual fields are the same or not as the probe grating displayed after about a second of memory delay. The probe grating would be the same as or different from the memory items (lure) by 1 or 4 JND units. The location of the probe would also vary randomly across the left and right visual field with respect to the location of the corresponding memory item. The participants were instructed to perform their recognition task exclusively to the spatial frequencies of the memory items and the probe while ignoring the potential location change of the probe. The results showed that false-recognition rates of the lure probe increased as the summed similarity between the memory items and the probe increased. The rates also further increased in the condition where the probe location was different from the location of the corresponding memory item compared to the condition where the probe location was the same. The increased false-recognition rates indicate that information stored into visual short-term memory is represented as a form of well-bound visual features rather than independent features.

• Journal of Korean Biological Nursing Science
• /
• v.2 no.2
• /
• pp.67-80
• /
• 2000

The purpose of this study was to identify hindlimb muscle atrophy in stroke induced rat and determine the effect of endurance exercise on body weight, weight of hindlimb muscle during 7 days after stroke induction. Thirty four male Sprague-Dawley rats with 200-270g body weight were divided into four groups : control, control+exercise(Con+Ex), stroke, and exercise after stroke(St+Ex) group. The control group and Con+Ex group received sham operation and the stroke group and St+Ex group received right MCA occlusion operation by using silicon-coated probe. The Con+Ex and St+Ex groups ran on a treadmill for 20min/day at 10m/min and $10^{\circ}grade$. Daily body weight and diet intake were measured every morning for 7 days. Cerebral infarction of stroke and St+Ex groups were identified by staining with TCC for 30minutes. The data were analyzed by Kruskal-Wallis test and Mann-Whitney U test using the SPSSWIN 9.0 program. Body weight of the control group at the 7th day increased by 18.3% significantly from the first day of experiment, that of the stroke group at the 7th day decreased by 6.7% significantly compared to the day of receiving right MCA occlusion operation. Body weight of the Con+Ex group at the 7th day increased by 10.3% significantly form the first day of experiment, that of St+Ex group at the 7th day also increased by 13.4% significantly compared to the day of receiving right MCA occlusion operation. The total amount of diet in stroke group decreased significantly compared to that of St+Ex and that of control group. In stroke group the wet weight of both sides of soleus, plantaris, and gastrocnemius muscles decreased significantly compared to that of control group. The relative weight of affected(left) plantaris and gastrocnemius muscles decreased significantly compared to that of the control group. The difference between the weight of affected and unaffected soleus, plantaris, and gastrocnemius muscles were not significant in stroke group. The wet weight of right gastrocnemius muscles in Con+Ex group increased compared to that of control group. The relative weight of right gastrocnemius muscle increased significantly compared to that of the control group. The wet weight of St+Ex group increased significantly compared to that of the stroke group in both sides of soleus, plantaris, and gastrocnemius muscles. The relative weight of affected plantaris muscle increased significantly compared to that of the stroke group. The difference between the weight of affected and unaffected soleus, plantaris, and gastrocnemius muscles were not significant in St+Ex group. Body weight and wet weight of soleus, plantaris, and gastrocnemius muscles in the St+Ex group did not recover to the values of control group. Based on these results, it can be suggested that endurance exercise during acute stage of stroke can reduce muscle atrophy related to denervation, inactivity and undernutrition.