• 광물과 암석
• /
• 제33권3호
• /
• pp.153-163
• /
• 2020

우리나라 제4기 고환경 변화 특성 규명을 위하여 수원시의 편마암 및 화강암 풍화대를 피복하는 적갈색 점토-실트 퇴적물 2개 단면(~3.5 m)에 대하여 광물 및 지화학 분석을 실시하였다. 퇴적층은 광물조성과 화학조성의 수직 변화를 기준으로 4개의 퇴적층(Unit 1-4)으로 구분되었다. 최하부 Unit 1은 K-장석 함량이 높은 사질 퇴적물로서 기반암 풍화물의 기여도가 높다. Unit 2는 전이층이며, Unit 3은 적갈색 점토-실트질 퇴적물로서 총점토 함량이 평균 58%이며, 주요 점토광물은 일라이트-스멕타이트 혼합층 광물과 수산기삽입질석/스멕타이트이다. Unit 3에는 사장석이 거의 함유되어 있지 않은 반면에, 그 풍화물인 고령토 광물의 함량이 다른 층들보다 높다. Unit 4는 전반적 광물조성과 화학적 특성이 Unit 3과 유사하나, 사장석과 녹니석의 함량이 더 높고 고령토 광물의 함량은 더 낮다. 단면내 화학성분 변화를 국내 타지역 적갈색 점토-실트층과 비교한 결과, Unit 3과 4는 풍성퇴적물의 범위에 포함되었다. 이 지역 퇴적 단면에서 고환경변화는 다음과 같이 해석된다. 기반암인 편마암과 화강암 풍화물이 침식되어 주변부에 사질 퇴적물로 퇴적되어 하부층(Unit 1, 2)을 이루고, 그 위에 빙하기의 점토-실트질 풍성퇴적물층(Unit 3)이 퇴적되었다. Unit 3은 간빙기의 풍화작용으로 풍화되어 전체적으로 적갈색 토양화되었다. 그 후 다시 빙하기로 접어들면서 최상부에 풍성퇴적물층(Unit 4)이 퇴적되었다.

• 한국건축시공학회지
• /
• 제13권6호
• /
• pp.609-618
• /
• 2013

The unit modular construction system is a building technique in which unit modules are manufactured at a factory and then assembled at the construction site. It has many benefits, including reduction of the construction period and improvement in quality. For this reason, it is utilized for various purposes in Japan and England. While it has been introduced in Korea, there have been few Korean studies conducted on the unit modular system. In particular, little research has been done on the method of safely fixating the unit modules to a truck. Therefore, this study reviewed the fixation methods of unit modules for transport, analyzed the problems, and designed a fixation device for unit modules. In addition, a device for the fixation of unit modules to a truck was developed, and a structural simulation was implemented for a safety test by considering the maximum stress generated during the transport of the unit modules fixed on a truck. When the device for the fixation of unit modules is manufactured based on the results of the structural simulation done in this study, it is expected to aid the development of a more practical fixation device for unit modules.

• 한국실내디자인학회논문집
• /
• 제38호
• /
• pp.116-124
• /
• 2003

The purpose of this study was provide basic data for homemakers' housing notion according to unit size in apartment. This study was conducted by questionnaires that concerning about middle class homemakers whom they lived in Bundang. The results of this study were as follows; 1) In research on the homemakers' general quality, 20pyung unit size was alike 30pyung unit size and 40pyung unit size was similar to 50pyung unit size. 2) Homemakers' perception according to unit size in apartment was various; (a) 20pyungㆍ30pyung unit size-effective household space for husbands' participation, more sports facilities, parking lot space etc. (b) 40pyungㆍ50pyung unit size-homemakers' individual room, ordering and variable unit plan etc. 3) In research on the homemakers' needs, each of unit size was analogous to storage, common facility, new design and new housing form etc.

• 설비공학논문집
• /
• 제19권1호
• /
• pp.68-76
• /
• 2007

As an alternative approach to evaluate the unit heating load for apartment houses, we newly developed and proposed unit building method. The new method, which calculates the heating load of an apartment building as a whole, conceptually corresponds to integral analysis of building heat loss, while the existing unit apartment method to differential analysis. Four typical building models of Korean-style apartment house and two dynamic load calculation programs were selected to validate the present method under realistically imposed conditions. Eight sets of unit heating load calculated respectively by unit building and unit apartment methods showed excellent agreements regardless of building model and simulation program. It is expected that the unit building method can take the place of the unit apartment method due to fewer modeling assumptions as well as less computational efforts. Additional calculations to investigate the effects of various parameters on unit heating load yield good consistencies with known facts, and re-confirm the validity.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.104-115
• /
• 2019

Since the Fukushima Daiichi accident, there has been an emphasis on the risk resulting from multi-unit accidents. Human reliability analysis (HRA) is one of the important issues in multi-unit probabilistic safety assessment (MUPSA). Hence, there is a need to properly identify all the human and organizational factors relevant to a multi-unit incident scenario in a nuclear power plant (NPP). This study identifies and categorizes the human and organizational factors relevant to a multi-unit incident scenario of NPPs based on a review of relevant literature. These factors are then analyzed to ascertain all possible unit-to-unit interactions that need to be considered in the multi-unit HRA and the pattern of interactions. The human and organizational factors are classified into five categories: organization, work device, task, performance shaping factors, and environmental factors. The identification and classification of these factors will significantly contribute to the development of adequate strategies and guidelines for managing multi-unit accidents. This study is a necessary initial step in developing an effective HRA method for multiple NPP units in a site.

• 한국수자원학회논문집
• /
• 제41권6호
• /
• pp.559-564
• /
• 2008

본 연구에서는 복합 강우사상으로부터 단위도와 S-곡선을 도출하는 실용적인 방법을 강구하였다. 이 연구에서 이용된 단위핵함수는 단위도와 S-곡선을 유도하는데 있어서 기존의 방법보다 편리하다. 그러나 실제 자료를 분석할 때 단위핵함수는 진동을 보이고 불안정하기 때문에 단위도와 S-곡선 도출에 있어서 장애가 있다. 그런데 단위핵함수의 요소인 Nash 의 순간단위도를 추정함에 있어서 Laplacian 행렬을 이용한 능형회귀분석을 이용하면 사상에 대한 평균적인 단위핵함수를 구하는데 유익함을 발견하였다. 또한 이를 이용하여 단위도의 지속기간 변경도 가능하였다. 이 연구에서 제시된 방법론은 단위도 제작에 적지 않은 도움이 될 것으로 기대한다.

• 한국응급구조학회지
• /
• 제6권1호
• /
• pp.77-86
• /
• 2002

The purposes of this research which was conducted by surveying lost/added unit hours reports, unit hour demand analysis worksheets from prehospital care reports of two squads in Kyonggi Provincial Fire and Disaster Headquarters for 20 weeks (January 1, 2002 - May 20, 2002) are to get Unit Hour Utilizations. Call Demands such as Unit Hour Demand, Simple Average Demand, High Average Demand, Peak Average Demand, the High Actual Demand. The conclusions from this analysis were summarized as follows: (1) By revealing Unit Hour Produced 3223.9, Call Volume 964, Unit Hour Utilization 0.299 at the Squad A and Unit Hour Produced 3328.4, Call Volume 901, Unit Hour Utilization 0.271 at the Squad B induced Korean Squads to chance identification, definition, direction of Unit Hour Utilization. (2) By revealing Simple Average Demand 7.4 on Monday Tuesday, High Average Demand 9.6 on Tuesday Friday. Peak Average Demand 11.5 on Tuesday, the High Actual Demand 12 on Tuesday Wednesday at the Squad A and Simple Average Demand 6.8 on Sunday, High Average Demand 10.4 on Monday, Peak Average Demand 11.5 on Monday, the High Actual Demand 13 on Monday at the Squad B enabled Korean Squads to utilize System Status Management. (3) The Maximum Calls per Unit Hour were 115 for 23:00~23:59, the Minimum Calls per Unit Hour were 46 for 05:00~05:49 in two squads. The Maximum Calls per Unit Hour were 7.4 on Tuesday Saturday, the Minimum Calls per Unit Hour were 6.1 on Thursday at the Squad A. The Maximum Calls per Unit Hour were 7.3 on Monday Saturday, the Minimum Calls per Unit Hour were 5.6 on Thursday at the Squad B. (4) Analyzing demand for EMTs in the optimum emergency medical service of Korea, we have been able to utilize this Unit Hour Utilization in company with the established estimation methods such as international comparisons or the number of ambulances for scientific reasonable estimation. (5) These Call Demands which were limited to the demand time in this study will make us expect some following studies including demand time, demand time, demand map for Strategic Deployment.

• 전기전자학회논문지
• /
• 제19권3호
• /
• pp.455-459
• /
• 2015

본 논문은 그래픽 처리 뿐 만 아니라 범용 연산의 가속화를 지원하기 위한 SIMT 구조 GP-GPU의 Dispatch Unit과 Operand Selection Unit을 제안한다. Warp Scheduler로부터 발행된 명령어에서 사용되는 Operand의 모든 정보를 Decoding 하면 불필요한 Operand Load가 발생하여 레지스터 부하가 발생 한다. 이러한 문제점을 해결하기 위해 Pre-decoding방법을 사용하여 Operand의 정보만을 먼저 Decoding 하여 Operand Load를 줄이고, 레지스터의 부하를 줄일 수 있는 방법을 제안한다. 제안하는 Dispatch Unit에서 나온 Operand 정보들을 레지스터 뱅크 충돌을 방지하는 방법을 적용한 Operand Selection Unit에 전달해 전체적인 처리 성능을 향상 시켰다. Modelsim 10.0b를 이용하여 Warp Scheduler로부터 발행된 10,000개의 임의의 명령어를 처리하여 소요되는 총 Clock Cycle을 측정하였다. 본 논문에서 제안한 Pre-Decoding 기능을 탑재한 Dispatch Unit과 Operand Selection Unit을 적용하여 기존의 방법들 보다 각각 약 11%, 24%의 처리 효율이 증가한 것을 확인 할 수 있었다.

• Nuclear Engineering and Technology
• /
• 제50권8호
• /
• pp.1234-1245
• /
• 2018

The risk of multi-unit nuclear power plants (NPPs) at a site has received considerable critical attention recently. However, current probabilistic safety assessment (PSA) procedures and computer code do not support multi-unit PSA because the traditional PSA structure is mostly used for the quantification of single-unit NPP risk. In this study, the main purpose is to develop a multi-unit Level 2 PSA method and apply it to full-power operating six-unit OPR1000. Multi-unit Level 2 PSA method consists of three steps: (1) development of single-unit Level 2 PSA; (2) extracting the mapping data from plant damage state to source term category; and (3) combining multi-unit Level 1 PSA results and mapping fractions. By applying developed multi-unit Level 2 PSA method into six-unit OPR1000, site containment failure probabilities in case of loss of ultimate heat sink, loss of off-site power, tsunami, and seismic event were quantified.

• International Journal of Contents
• /
• 제8권3호
• /
• pp.100-104
• /
• 2012

In this paper, a unit cell for low pass filter design by using composite right and left-handed transmission line in conductor-backed coplanar waveguide is proposed. The characteristics of the unit cell are analyzed in order to design a low pass filter in small sizes. By changing the sizes of the unit cell, the parameters of right-handed and left-handed immittance components are changed and the desired characteristics of the unit cell are achieved. The equivalent circuit of the unit cell is extracted and analyzed either. As a result, the simulation results of the unit cell and the equivalent circuit are almost identified. The movement and energy distributions of electromagnetic field are shown to confirm the property of the unit cell. In the end, a low pass filter is demonstrated by cascading three proposed unit cells, which shows cutoff frequency of 1.53GHz and deep attenuation from 2.23GHz to 4.49GHz lower than -50dB.