• Advances in aircraft and spacecraft science
• /
• 제8권1호
• /
• pp.31-51
• /
• 2021

Selective laser melting (SLM), one of the most widely used powder bed fusion (PBF) additive manufacturing (AM) technology, enables the fabrication of customized metallic parts with complex geometry by layer-by-layer fashion. However, SLM inherently poses several problems such as the discontinuities in the molten track and the steep temperature gradient resulting in a high degree of residual stress. To avoid such defects, thisstudy proposes a temperature thread multiscale model of SLM for the evaluation of the process at different scales. In microscale melt pool analysis, the laser beam parameters were evaluated based on the predicted melt pool morphology to check for lack-of-fusion or keyhole defects. The analysis results at microscale were then used to build an equivalent body heat flux model to obtain the residual stress distribution and the part distortions at the macroscale (part level). To identify the source of uneven heat dissipation, a liquid lifetime contour at macroscale was investigated. The predicted distortion was also experimentally validated showing a good agreement with the experimental measurement.

• 한국세라믹학회지
• /
• 제55권2호
• /
• pp.145-152
• /
• 2018

Although many bone graft materials have been developed, powder graft materials are somewhat difficult to use in surgery. To solve this problem, a bone graft material in the form of a viscous paste was prepared. Hydroxyapatite was used as a bone graft material, and methyl cellulose was used to impart viscosity. Three cases of samples were prepared, and freeze-dried block type and sintered specimens were made from the paste. The recrystallization of the graft material in a simulated body fluid and the degree of graft adhesion with a tooth were observed by scanning electron microscopy (SEM). The test for cytotoxicity was carried out and the sample was grafted into the back of a mouse to confirm the presence or absence of side effects in the animal's body. Based on these investigations, composites of this type are expected to be applicable for bone grafts.

• 한국측량학회지
• /
• 제31권6_2호
• /
• pp.593-599
• /
• 2013

China's Mapping Satellite-1, developed by the China Aerospace Science and Technology Corporation (CASC), was launched in three years ago. The data from Mapping Satellite-1 are able to use for efficient surveying and geometric mapping application field. In this paper, we fuse the panchromatic and multispectral images of Changchun area, which are obtained from the Mapping Satellite-1, the one that is the Chinese first transmission-type three-dimensional mapping satellite. The four traditional image fusion methods, which are HPF, Mod.IHS, Panshar and wavelet transform, were used to approach for effectively fusing Mapping Satellite-1 remote sensing data. Subsequently we assess the results with some commonly used methods, which are known a subjective qualitative evaluation and quantitative statistical analysis approach. Consequently, we found that the wavelet transform remote sensing image fusion is the optimal in the degree of distortion, the ability of performance of details and image information availability among four methods. To further understand the optimal methods to fuse Mapping Satellite-1 images, an additional study is necessary.

• 대한원격탐사학회지
• /
• 제26권1호
• /
• pp.39-45
• /
• 2010

본 연구는 지상라이다 자료의 점군간 자동정합을 위해 인접한 두 점군 자료와 함께 획득되는 2차원의 강도영상 자료로부터, 2개 영상에서 동시에 관측되는 특징점들을 이용하여 SIFT 알고리즘에 의해 공액점을 선정하였다. 또한 매칭 오류점 배제를 위해 RANSAC 알고리즘을 적용하여 정합 정확도 향상을 도모하였다. 두 점군간의 변환식 매개변수인 3차원 회전변환 각과 수직/수평 이동량을 계산, 그 결과를 기존 수작업에 의한 결과와 비교하였다. 건국대학교 이과대학 건물을 대상으로 실험한 결과, 자동매칭을 통한 변환매개변수와 수작업으로 한 변환매개변수의 차이는 X, Y, Z, 방향으로 각각 0.011m, 0.008m, 0.052m로서 자동정합 자료의 활용이 가능하다고 판단하였다.

• 한국전자통신학회논문지
• /
• 제11권2호
• /
• pp.237-244
• /
• 2016

보행자가 생활환경에서 겪을 수 있는 위험을 인지하기 위하여 감지하여야 하는 목표를 두 가지로 고려할 수 있다. 위험을 감지하기 위하여 보행자의 상태와 보행 환경 요인을 함께 인지하는 것이다. 생활 안전을 위하여 사물인터넷 기술이 좋은 기여를 할 수 있다. 본 연구는 보행자의 상태와 주변 환경 요인들에 대한 데이터 융합 처리를 이용하여 위험을 인지하는 방안을 제안하였다. 3축 가속도 센서를 이용하여 보행자의 걸음을 인식하고 이를 개인의 상태 추정에 활용하였으며, 조도 센서로부터의 측정값으로 보행환경을 추정하였다. 위험 요인들을 평가하고 융합 처리함으로써 보행자의 위험도를 산출하였다.

• 융합정보논문지
• /
• 제8권2호
• /
• pp.45-50
• /
• 2018

본 연구는 수도권지역에 있는 사회복지시설 사회복지사 135명을 대상으로 설문조사를 실시하였고, 사회복지사의 자원개발역량강화와 조직효과성 향상을 강조하기 위해서 본 연구를 실시하였다. 연구결과는 다음과 같다. 자원개발역량의 태도는 직무만족에 부적인 영향을, 지식은 직무만족에 정적인 영향을, 가치와 기술은 직무만족에 영향을 미치지 않은 것으로 나타났다. 자원개발역량의 가치와 지식은 조직몰입에 정적인 영향을, 태도와 기술은 조직몰입에 부적인 영향을 미치는 것으로 나타났다. 자원개발역량의 가치는 이직의도에 영향을 미치지 않았으며, 태도는 이직의도에 부적인 영향을 미치는 것으로 나타났다. 기술은 이직의도에 정적인 영향을 미치는 것으로 나타났다. 지식은 이직의도에 부적인 영향을 미치는 것으로 나타났다. 따라서 사회복지사의 자원개발역량인 가치, 태도, 기술, 지식을 높이기 위한 노력을 할 경우, 직무만족이 낮아지거나 이직하고자 하는 의도정도가 상승하는 현상이 나타나 아직까지 사회복지사의 개인역량의 가치를 높이기 위한 사회복지조직의 환경이 열악한 상황임을 알 수 있으므로 이를 개선하기 위한 지원과 노력이 필요하다.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.473-480
• /
• 2005

A three axes marine satellite antenna has been developed. As a design step, a CAD model for the antenna has been created according to the design requirements. Kinematic analyses are carried out to insure design specification and to check collision detection of the CAD model. Marine satellite antennas experience base motions, and a relevant control system should control the three antenna axis to point to the satellites accurately. A sensor fusion algorithm and a PIDA (Proportional, Integral, Derivative, Acceleration) control algorithm are designed and implemented to control the yaw, level, and cross-level angle of a small size satellite marine antenna. Antenna stabilization control experiments are performed using a test simulator which gives the antenna base motions. Experimental results show small pointing errors, which is less than 0.2 degree for the level, cross-level, and yaw axis.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.74-75
• /
• 2006

Recently much attention has been drawn to meshfree method since conventional methods such as FDM, FVM and FEM have suffered from difficulty with mesh generation for complex geometry and deformable bodies. In this paper, an upwind point collocation meshfree method developed by the authors is applied to two shock wave diffraction problems. One is the shock diffraction over a 90-degree corner and the other is the single Mach reflection on a ramp. The scheme showed stability and the results showed accuracy.

• Corrosion Science and Technology
• /
• 제7권3호
• /
• pp.162-167
• /
• 2008

Degradable implants have been in use for bone surgery for decades. However, degradable metal implants are one of the new research areas of biomaterials science. Magnesium has good biocompatibility due to its low toxicity, and it is a corroding, i.e. dissolvable, metal. Furthermore, magnesium is needed in human body, and naturally found in bone tissue. There have been some published reports also asserting the potential bone cell activation or bone healing effect of high magnesium ion concentrations. The classic method for achieving intertransverse process fusion involves autogenous iliac crest bone graft. Several investigations have been performed to enhance this type of autograft fusion. However, there is no research which has been undertaken to investigate the efficiency of pure magnesium particles in posterolateral spinal fusion. In this study, corrosion behavior of magnesium metal at the bone interface, the possibility of new bone cell formation and the degree of effectiveness in producing intertransverse process lumbar fusion in a sheep model have been investigated. Cortical bone screws were machined from magnesium alloy AZ31 extruded rod and implanted to hip-bones of sheep via surgery. Three months after surgery, the bone segments carrying these screws were removed from the sacrificed animals. Samples were sectioned to reveal Mg/bone interfaces and investigated using optical microscope, SEM-EDS and radiography. Optical and SEM images showed that there was a significant amount of corrosion on the magnesium screw. The elemental mapping results indicate, due to the presence of calcium and phosphorus elements, that there exists new bone formation at the interface. Furthermore, sixteen sheep were subjected to intertransverse process spinal fusions with pedicle screw fixation at various locations along their spines. Each animal was treated with 5cc autograft bone at one fusion level and 1cc magnesium+5cc autograft bone at the other. Six months after surgery, bone formation was evaluated by gross inspection and palpation, and radiological, histological, scanning electron microscopic and x-ray diffraction analyses. It may be stated that the potential for using useful corrosion of magnesium alloys in medical applications is expected to be significant.

• Food Science and Biotechnology
• /
• 제16권5호
• /
• pp.778-782
• /
• 2007

This study assessed the effects of the antimicrobial substances sulforaphane, grapefruit seed extracts (GSE), and reuterin on the expression of Salmonella HilA and InvF virulence gene using a LacZY assay (${\beta}$-galactosidase assay) with hilA:lacZY and invF:lacZY fusion strains of Salmonella typhimurium SL1344. Salmonella was grown for 8 hr at $37^{\circ}C$ in the presence of diluted antimicrobial substances ($2\;{\mu}g/mL$ sulforaphane, $20\{\mu}g/mL$ GSE, and 0.26 mM reuterin) at concentrations that did not inhibit the cellular growth of Salmonella. Sulforaphane inhibited the expression of HilA and InvF by 50-90 and 20-80%, respectively. GSE also inhibited the expression of both genes, but to a lesser degree. Among the 3 antimicrobial substances, reuterin showed the least inhibition, which was abolished after 3-4 hr. None of the antimicrobial substances inhibited the ${\beta}$-galactosidase enzyme activity of S. typhimurium. The assay used in this study represents a very sensitive method for screening bioactive substances that inhibit the expression of virulence genes in Salmonella.