• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.3 s.345
• /
• pp.48-58
• /
• 2006

This paper presents 8x8 two dimensional DCT/IDCT processor of adder-based distributed arithmetic architecture without applying ROM units in conventional memories. To reduce hardware cost in the coefficient matrix of DCT and IDCT, an odd part of the coefficient matrix was shared. The proposed architecture uses only 29 adders to compute coefficient operation in the 2-D DCT/IDCT processor, while 1-D DCT processor consists of 18 adders to compute coefficient operation. This architecture reduced 48.6% more than the number of adders in 8x8 1-D DCT NEDA architecture. Also, this paper proposed a form of new transpose network which is different from the conventional transpose memory block. The proposed transpose network block uses 64 registers with reduction of 18% more than the number of transistors in conventional memory architecture. Also, to improve throughput, eight input data receive eight pixels in every clock cycle and accordingly eight pixels are produced at the outputs.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1173-1176
• /
• 2005

Depending on the characteristics of each 3D-DCT block, images can be classified into three types: images with motion and textures, images with high textures and little motion, images with little textures and little motion. In this paper, we propose an adaptive watermarking method using these characteristics of each 3D-DCT block. and the human visual system. The proposed method classifies patterns of 3D-DCT blocks based on the motion and texture information, and classifies the image type according to the ratio of these patterns. The watermark is inserted proportional to the 3D-DCT coefficients by using pattern adaptive JND, which. makes the proposed watermarking robust by inserting watermarks in as many blocks as possible. Experimental results show that the proposed method achieves better performance in terms of invisibility and robustness than the previous method.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.8
• /
• pp.1227-1237
• /
• 1989

In this paper, we propose a lossless progressive image transmission scheme using hierarchical pyramid structure and classified vector quantizer in DCT domain. By adopting DCT to the hierarchical pyramid signals, we can reduce the spatial redundance. Moreover, the DCT coefficients can be encoded efficiently by using classified vector quantizer in DCT domain. The classifier is simply based on the variance of a subblock. Also, the mirror set of training set of images can improve the robustness of codebooks. Progressive image transmission can be achieved through following processes: from top to bottom level of planes in a pyramid, and from high to low AC variance class in a plane. Some simulation results with real images show that the proposed coding scheme yields a good performance at below 0.3 bpp and an excellent result at 0.409 bpp. The proposed coding scheme is well suited for lossless progressive image transmission as well as image data compression.

• Journal of Microbiology
• /
• v.38 no.3
• /
• pp.176-179
• /
• 2000

A challenge phage system was used to study the DNA-protein interaction between C4-dicarboxylic acid transport protein D(DCTD) or $\sigma$54, and a $\sigma$54 -dependent promoter, dctAp. R. meliloti dctA promoter regulatory region replaced the Omnt site on the phage. S. typhimurium strains overproducing either DCTD or $\sigma$54 directed this challenge phage towards lysogency, indicating that DCTD or E$\sigma$54 recognized the dctA promoter on the phage and repressed transcription of the ant gene. These challenge phage constructs will be useful for examining interactions between DCTD(or $\sigma$54) and the dctA promoter region.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.863-866
• /
• 2005

Low-power design is one of the most important challenges encountered in maximizing battery life in portable devices as well as saving energy during system operation. In this paper we propose a low-power DCT (Discrete Cosine Transform) architecture using a modified Computation Sharing Multiplication (CSHM). The overall rate of power consume is reduced during DCT: the proposed architecture does not perform arithmetic operations on unnecessary bits during the Computation Sharing Multiplication calculations. Experimental results show that it is possible to reduce power dissipation up to about $7{\sim}8%$ without compromising the final DCT results. The proposed lowpower DCT architecture can be applied to consumer electronics as well as portable multimedia systems requiring high throughput and low-power.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.2
• /
• pp.138-148
• /
• 2001

Digital Video (DV) coding standards for digital video cassette recorder are based mainly on DCT and variable length coding. DV has low hardware complexity but high compressed bit rate of about 26 Mb/s. Thus, it is necessary to encode video with low complex video coding at the studios and then transcode compressed video into MPEG-2 for video-on-demand system. Because these coding methods exploit DCT, transcoding in the DCT domain can reduce computational complexity by excluding duplicated procedures. In transcoding DV into MPEC-2 intra coding, multiplying matrix by transformed data is used for 4:1:1-to-4:2:2 chroma format conversion and the conversion from 2-4-8 to 8-8 DCT mode, and therefore enables parallel processing. Variance of sub block for MPEG-2 rate control is computed completely in the DCT domain. These are verified through experiments. We estimate motion hierarchically using DCT coefficients for transcoding into MPEG-2 inter coding. First, we estimate motion of a macro block (MB) only with 4 DC values of 4 sub blocks and then estimate motion with 16-point MB using IDCT of 2$\times$2 low frequencies in each sub block, and finish estimation at a sub pixel as the fifth step. ME with overlapped search range shows better PSNR performance than ME without overlapping.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.9C
• /
• pp.879-885
• /
• 2002

The performance of communication systems should be tested against a set of requirements. To this end, noise generation systems are used to generate noise signals with specified characteristics. In this paper, we propose the area & power-efficient noise generation system based on DCT method. It is shown that the proposed structure results in area reduction of non-DCT block by 44∼47%. Moreover, since the proposed structure does not use high-speed internal clock, it achieves power reduction by 74∼77%.

• Journal of Korea Multimedia Society
• /
• v.16 no.4
• /
• pp.411-417
• /
• 2013

In this paper, we proposed a fast detection method of copy-move forgery image based on low frequency coefficients of the DCT coefficients. We proposed a new matching criterion of copy-moved forgery image detection (MCD) using discrete cosine transform. For each $8{\times}8$ pixel block, the DCT transform is calculated. Our algorithm uses low frequency four (DC, 3 AC coefficient) and six coefficients (DC, 5 AC coefficients) of DCT per $8{\times}8$ pixel block. Our algorithm worked block matching for DCT coefficients of the $8{\times}8$ pixel block is slid by one pixel along the image from the upper left corner to the lower right corner. Our algorithm can reduce computational complexity more than conventional copy moved forgery detection algorithms.

• Journal of Broadcast Engineering
• /
• v.26 no.5
• /
• pp.553-565
• /
• 2021

Point cloud is a set of points for representing a 3D object, and consists of geometric information, which is 3D coordinate information, and attribute information, which is information representing color, reflectance, and the like. In this way of expressing, it has a vast amount of data compared to 2D images. Therefore, a process of compressing the point cloud data in order to transmit the point cloud data or use it in various fields is required. Unlike color information corresponding to all 2D geometric information constituting a 2D image, a point cloud represents a point cloud including attribute information such as color in only a part of the 3D space. Therefore, separate processing of geometric information is also required. Based on these characteristics of point clouds, MPEG under ISO/IEC standardizes V-PCC, which imitates point cloud images and compresses them into 2D DCT-based 2D image compression codecs, as a compression method for high-density point cloud data. This has limitations in accurately representing 3D spatial information to proceed with compression by converting 3D point clouds to 2D, and difficulty in processing non-existent points when utilizing 3D DCT. Therefore, in this paper, we present 3D Discrete Cosine Transform-based Point Cloud Compression (3DCT PCC), a method to compress point cloud data, which is a 3D image by utilizing 3D DCT, and confirm the efficiency of 3D DCT compared to V-PCC based on 2D DCT.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.605-608
• /
• 1999

A conventional image coder, such as JPEG, requires not only DCT and quantization but also additional pre-filtering under noisy environment. Since the pre-filtering removes camera noise and improves coding efficiency dramatically, its efficient implementation has been an important issue. Based on well-known noise removal techniques in image processing fields, this paper introduces an efficient scheme by adapting a noise removal procedure to block-based image coders. By using two-dimensional DCT factorization, the proposed image coder has only a modified DCT and a VLC, and performs pre-filtering and quantization simultaneously in the modified DCT operation.