• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.216.2-216.2
• /
• 2010

본 연구에서는 $H_2+CO_2$(40%) 혼합기체로부터 이산화탄소를 효과적으로 분리/회수 하기 위하여 가스 하이드레이트 형성법을 제안하였다. 하이드레이트의 형성 조건을 보다 완화시켜 주기 위하여 열역학적 촉진제로서 TBAB (Tetra-n-butyl Ammonium Bromide, $(C_4H_9)_4NBr$))와 THF(Tetrahydrofuran)를 각각 첨가하여 열역학적 촉진 현상을 살펴보았다. 다양한 농도의 TBAB(10, 40, 60 wt%)와 THF(1, 5.56, 10 mol%)에 대하여 3상(H - Lw - V) 평형을 측정하였다. 그 결과 40 wt%의 TBAB와 5.56 mol%의 THF의 농도에서 가장 큰 촉진효과를 보였으며 그 이상의 농도에서는 오히려 촉진효과가 줄어드는 것을 확인할 수 있었다. 이러한 결과는 혼합가스 하이드레이트 형성시 양론비 이상의 TBAB와 THF가 첨가될 경우 반응에 참여하지 못한 TBAB와 THF가 가스 하이드레이트 형성을 방해하기 때문이다. 열역학적 촉진제로서 실제공정에 적용할 경우 40 wt%의 TBAB와 5.56 mol%의 THF를 사용하는 것이 가장 효과적일 것으로 사료된다. 본 실험에서 얻어진 결과는 가스 하이드레이트 형성법을 이용한 합성가스 분리 공정 개발에 중요한 기초 자료가 될 것이다.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1333-1336
• /
• 2014

Expanded polytetrafluoroethylene (ePTFE) grafts have been used as vascular access for many patients suffering from end stage renal disease. However, the vascular graft can cause significant clinical problems such as stenosis or thrombosis. For this reason, many studies have been performed to make drug eluting graft, but initial burst is major problem in almost drug eluting systems. Therefore we used biodegradable polymer to reduce initial burst and make sustained drug delivery. The ePTFE grafts were dipped into a paclitaxel-dissolved solution and then PLGA-dissolved solution was passed through the lumen of ePTFE. We analyzed whether the dose of paclitaxel is enough and the loading amount of PLGA on ePTFE graft increases according to the coating solution's concentration. Scanning electron microscope (SEM) images of various concentration of PLGA showed that the porous surface of graft was more packed with PLGA by tetrahydrofuran solution dissolved PLGA. In addition, in vitro release profiles of Ptx-PLGA graft demonstrated that early burst was gradually decreased as increasing the concentration of PLGA. These results suggest that PLGA coating of Ptx loaded graft can retard drug release, it is useful tool to control drug release of medical devices.

• Elastomers and Composites
• /
• v.52 no.4
• /
• pp.287-294
• /
• 2017

Nanocomposites based on $SnO_2-Mn$ were synthesized by the reaction of tin (II) chloride dihydrate and manganese (II) chloride tetrahydrate at a molar ratio of 10:1 in the presence of ammonium hydroxide at $80^{\circ}C$. The $SnO_2-Mn$ nanocomposites were stirred with fullerene [$C_{60}$] in a mass ratio of 2:1 in tetrahydrofuran to prepare $SnO_2-Mn-C_{60}$ nanocomposites; these nanocomposites were obtained upon heating the mixture of $SnO_2-Mn$ nanocomposites and fullerene [$C_{60}$] in an electric furnace at $700^{\circ}C$ for 2 h. The synthesized $SnO_2-Mn-C_{60}$ nanocomposites were confirmed through various characterization methods such as X-ray diffraction and scanning electron microscopy. The photocatalytic activities of the $SnO_2-Mn-C_{60}$ nanocomposites were demonstrated by the degradation of the organic dyes BG, MB, MO, and RhB under 254 nm irradiation and evaluated using UV-Vis spectrophotometry.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.11
• /
• pp.727-730
• /
• 2015

In this paper, we fabricated organic compounds detector using the MWCNT/PMMA (multi-walled carbon nanotube / polymethylmethacrylate) composite film. We used polymer film as a matrix material for the device framework, and introduced CNTs for reacting with the organic compounds resulting in changing electrical conductivity. Spray coating method was used to form the MWCNT/PMMA composite film detector, and pattern formation of the detector was done by shadow mask during the spray coating process. We investigated changes of electrical conductivity of the detector before and after the organic compounds exposure. Electrical conductivity of the detector tended to decrease after the exposure with various organic compounds such as acetone, tetrahydrofuran (THF), toluene, and dimethylformamide (DMF). Finally we conclude that organic compounds detection by the MWCNT/PMMA composite film detector was possible, and expect the feasibility of commercial MWCNT/PMMA composite film detector for various organic compounds.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.11
• /
• pp.1616-1622
• /
• 2002

If the surfaces of vesicles are chemically modified so that they can be dispersed in organic solvents, the application of vesicular colloids may be expanded. A polymerizable surfactant (BDAC) and nonpolymerizable bipolar surfactant (BPAS) were synthesized in multi-steps. Large vesicles composed of BDAC and BPAS with embedded a cross-linking agent (divinylbenzene) underwent a radical polymerization. BPAS was extracted out using methanol (skeletonization). The headgroup of BDAC was cleaved off via hydrolysis in an acidic condition to yield vesicles where surfaces were covered with -COOH groups. There was no significant change in the overall shape. The skeletonized vesicles appear to have many holes with diameters up to about 25 nm. The holes retained even after hydrolysis. The hydrolyzed vesicles were not dispersed in water and most organic solvents such as tetrahydrofuran and chloroform, but dispersed in methanol.

• Applied Chemistry for Engineering
• /
• v.27 no.1
• /
• pp.10-15
• /
• 2016

In this new energy economy era, the importance of renewable energy resource needs to be highly addressed, as the demand of energy dramatically increases and fossil fuel is being exhausted. Lignocellulosic biomass is considered as the sustainable and renewable feedstock to produce biochemicals and biofuels that are the alternative for petroleum derived products. Furfural is a natural precursor for the range of furan based chemicals and solvents such as methylfuran, tetrahydrofuran, methyltetrahydrofuran, ethyltetrahydrofuryl ether, ethyl levulinate, levulinic acid, and alkanes. Thus, furfural should be a renewable platform chemical for biochemicals and renewable biofuels. In this paper, the concept of biorefinery, furfural production and its applications are briefly reviewed.

• Elastomers and Composites
• /
• v.24 no.2
• /
• pp.110-121
• /
• 1989

The radical initiated graft copolymerization of acrylonitrile(AN) and 4-chlorostyrene(4-Clst) onto ethylene-propylene-diene terpolymer(EPDM) rubber was investigated under various conditions. Graft copolymer(AU-EPDM-4-Clst) was isolated b: selective solvent extraction and identified by using IR spectroscopy. The percent grafting is determined as a function of solvent, reaction time, and monomer mole ratio. Percent grafting decreased in the order of tetrahydrofuran(THF)>THF/ethyl acetate(EA)(1 : 1)>cyclohexane/EA(1 : 1)>n-hexane/EA(1 : 1). Grafting increased continuously with increasing the reaction time up to 40 hr, beyond which the grafting levelled off. It was observed that percent grafting increased as increasing [4-Clst]/[AN] mole ratio, but decreased when [4-Clst]/[AN] mole ratio was higher than 1.60. The light resistance of graft copolymer(AN-EPDM-4-Clst) was better than that of ABS.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.129-132
• /
• 1999

A new single solution source MOCVD technique for the deposition of YBCO film has been developed, using a ultrasonic atomizer to feed the precursors into an evaporation zone. This method being investigated as a basis for future long wire fabrication, for example the electric power use, the magnatic applications, etc.. YBCO films were prepared on MgO(100) substrate, using mixture of Y, Ba, and Cu ${\beta}$ -diketonate chelate was dissolve in tetrahydrofuran as a solution sources. X-ray diffraction measurement indicated that the thin film grew epitaxially with the c-axis orientation perpandicular to the surface of the surface.

• Journal of the Korean Chemical Society
• /
• v.26 no.5
• /
• pp.340-348
• /
• 1982

The presence of 10 mole percent triphenyl borate accelerated dramatically the rate of reduction of structurally different sulfoxides with borane in tetrahydrofuran at room temperature, compared to the slow reduction with borane itself. Tetramethylene sulfoxide underwent complete reduction in 5 min and diethyl sulfoxide, dibenzyl sulfoxide and benzylphenyl sulfoxide were reduced quantitatively within 1h, whereas the reduction of diphenyl sulfoxide was rather slow, giving diphenyl sulfide in 90% yield in 24h. Boron trifluoride etherate and triethyl borate were less effective than triphenyl borate. A possible mechanism is presented.

• Journal of the Korean Ceramic Society
• /
• v.33 no.12
• /
• pp.1387-1393
• /
• 1996

A study on mesophase pitch as a matrix precursor of carbon fiber reinforced carbon (C/C) composite has been recently presented. This study is concerned with the production of mesophase pitch as matrix precursors for C/C composite from coal tar pitch. A commercial coal tar pitch was heat-treated at 25$0^{\circ}C$ for 2 hours to remove low molecular weight fraction from the pitch then increasing the temperature of the pitch to between 350~45$0^{\circ}C$ to produce mesophase pitch. The pitch was continuously stirred during this time and nitrogen gas was continuously bubbled through the pitch. Spherical and bulk mesophases were formed in the pitch after heat-treatment,. Parent and mesophae pitches were characterized by elemental analysis coke yield solubi-lity in tetrahydrofuran and hexane and an optical microscopy to measure the mesiophase content. It was neces-sary to produce C/C composite that a mesophase pitch with about 30-40 vol% mesophase spherulites can be infiltrated into a fiber preform without a filter effect as a matrix precursor conditions. This condition was satisfied with mesophase pitch heat treated at 40$0^{\circ}C$ for 2 hours. The other heat treatment conditions showed the nuclei of mesophase or bulk mesophae which were not satisfied with the matix precursor condition.