• 항공우주기술
• /
• 제7권1호
• /
• pp.161-169
• /
• 2008

본 논문에서는 KSLV-I 상단조립체에 대하여 수행된 시스템 인증수준의 전자파시험에서 GPS 수신기 시스템을 위한 시험 구성 및 운용 방법을 소개하고 성능분석 결과를 기술한 다. GPS 수신기 시스템은 이미 단품 수준에서 수차례의 설계 변경을 통하여 MIL-STD-461E 기준으로 규정된 KSLV-I 상단 전자장비 시험 규격을 만족함을 확인하였다. 시스템 인증수준으로 수행된 전자파시험에서 GPS 수신기 시스템은 다른 탑재물들과의 전자파적 간섭에도 정상적으로 동작하였으며 전계필드 입사 및 정전기 방전의 조건에서도 성능저하가 발생하지 않아 KSLV-I 상단 전자파환경 조건에서의 동작성이 검증되었다.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.362-368
• /
• 2017

The endurance test is important to evaluate and predict defects of the vehicles. In particular, in order to improve the reliability of the endurance test for the powertrain system of military vehicles, the driving load is measured and analyzed at test courses and maneuvering roads. As a result, new test courses for powertrain system is additionally needed to improve test reliability. In this paper, it shows that new test courses for powertrain system is designed and constructed using the measuring and anlayzing result between CPG test courses and army maneuvering roads.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.157-163
• /
• 2000

Testing evaluation is a part of process for design, production, evaluation, operation and abolition, and is the process of certifying system performance. The main purpose of testing evaluation is to reduce the risk factor under the determining process. Testing process has the three step such as design qualification, integration and validation test in factory, system integration and commissioning test. Design Qualification is to verify errors on the design process. Integration and validation test in factory is for the H/W and S/W of an equipment and is to verify interface of subsystem, communication protocol and main functions. System integration and commissioning test is a functional test to adjust successful installation of equipment. According to the testing process, briefly consideration for test item, test method and test contents about signalling system is carried out.

• 한국정밀공학회지
• /
• 제13권9호
• /
• pp.114-129
• /
• 1996

This paper describes the whole development phase for the underwater vehicle actuating system with high hydroload torque disturbance. This includes requirement analysis, system modeling, control algorithm design, real time implementation, test and performance evaluations. As for driving control algorithms, fuzzy logic, variable structure and PD(Proportional-Differential) algorithm were designed and implemented on board controller using a single chip microprocessor. Intel 8797. And test and performance evaluation is carried out both single test and wystem integration test. We could confirm the basic performance of actuating system through the single test and gereral developing work of any actuating systems was finished with a single performance test of actuating system without system integration test. But, we suggested that system integration test be needed. System integration test is carried out using G/C HILS(Guidance and Control Hardware-In-the -Loop Simulation) which is constituted flight motion simulator, load simulator, real time host computer and the related subsystems such as inertial navigation system, power supply system and Guidance and Control Computer etc.. The most important practical contribution of this paper is that full system characteristics such as minimal control effort, enhancement of guidance and autopilot performance by the actuating system using G/C HILS technique are investigated. Through full running G/C HILS, in spite of the passing to single tests, some control algorithm resulted in failure as to stability of full system and system time frame.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.1205-1211
• /
• 2017

한국형발사체 각 단 추진기관시스템의 성능 검증을 위해 나로우주센터에 추진기관시스템 시험설비(PSTC, Propulsion System Test Complex)가 구축되었다. 본 논문은 PSTC 지상설비와 발사체 운용 및 제어를 위해 개발된 통합제어시스템(MCS, Main Control System)의 설계, 개발 현황, 시운전 결과에 관한 내용이다. MCS는 시험대상체와 지상시스템의 인터페이스에 활용될 예정이며, 시험책임자에 의한 시험운용 및 시퀀스 처리를 수행하게 된다. 또한 시험책임자 모의시험운용에도 활용될 예정이다.

• 항공우주시스템공학회지
• /
• 제13권3호
• /
• pp.40-47
• /
• 2019

본 논문은 무인항공기 체계(UAS; unmanned aerial system)의 비행체 탑재장비 및 지상에서 운용하는 장비의 연동 검증을 위한 체계통합실험실(SIL; system integration laboratory) 및 체계통합시험(SIT; system integration test)의 환경 구축 및 이를 통한 검증방법에 대하여 다룬다. SIL 내 구축된 지상통제체계, 데이터링크체계, 비행체 탑재장비, 임무장비(EO/IR, SAR) 등과 같은 부체계간의 인터페이스 환경 및 모의 비행을 통한 체계 운용로직의 검증방법과 실험실 레벨에서의 검증이 완료된 각 부체계를 실제 시험 환경에서 검증하는 방법에 대해 기술한다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권3호
• /
• pp.229-239
• /
• 2018

Purpose: There is a difficulty in Environmental Stress Screening (ESS) test design for weapon system's electrical/electronic components/products in small and medium-sized enterprises. To overcome this difficulty, I propose an easy ESS test design approach algorithm that is optimized with only one environment tolerance design information parameter (${\Delta}T$). Methods: To propose the mass production weapon system ESS test design for cost-effective optimization, I define an optimum cost-effective mathematical model ESS test algorithm model based on modified MIL-HDBK-344, MIL-HDBK-2164 and DTIC Technical Report 2477. Results: I clearly confirmed and obtained the quantitative data of ESS effectiveness and cost optimization along our ESS test design algorithm through the practical case. I will expect that proposed ESS test method is used for ESS process improvement activity and cost cutting of mass production weapon system manufacturing cost in small and medium-sized enterprises. Conclusion: In order to compare the effectiveness of the proposed algorithm, I compared the effectiveness of the existing ESS test and the proposed algorithm ESS test based on the existing weapon system circuit card assembly for signal processing. As a result of the comparison, it was confirmed that the test time was reduced from 573.0 minutes to 517.2minutes (9.74% less than existing test time).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.131-138
• /
• 2001

This paper describes the result of endurance test of the brake system of the Korean EMU on the Sangju test track. The purpose of the test is to prove the endurance of brake system. Test conditions are more severe than actual operation on the commercial line. As of October, test result is good without severe problems. 100,000km of test operation will be continued by the end of this year to check the endurance of the brake system.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.29.1-29.1
• /
• 2008

The temperature control system which is using liquid and gaseous nitrogen has been known as the most economical system to simulate space temperature condition due to relatively not expansive price of the liquid nitrogen (less than 0.2 USD per liter). And, among these systems, the closed loop system which circulates compressed nitrogen gas come from sprayed liquid nitrogen by blower and makes a target temperature with heat from an electrical heater and flow rate of liquid nitrogen is prevail all over the world. But, this complete closed loop system requires expansive equipments such as blower, heater, and liquid nitrogen injector, and special maintenance on the system. Therefore, KARI is developing efficient and simple open loop system which utilizes liquid and gaseous nitrogen with eliminating a special blower and other expansive units. In this study, this open loop system with more efficiency and flexibility will be designed and introduced.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.507-511
• /
• 2018

본 논문은 시스템 IC 반도체의 고속(300MHz) 테스트를 위한 시스템 개발에 대한 방법을 제안한다. 하이스피드 테스트 시스템은 고속 테스트 회로 인터페이스와 노이즈 저감을 위한 PCB 설계 방법을 제안한다. 본 논문은 개발된 시스템의 성능 검증을 위한 평가 항목과 절차를 제안한다. 시스템 IC 하이스피드 테스트 시스템 개발은 국내 시스템 IC테스트 장비개발의 최적화에 도움이 될 것으로 생각한다.