• 설비공학논문집
• /
• 제26권11호
• /
• pp.541-546
• /
• 2014

The present study was conducted to determine whether ESCO Business is success or not. ESCO Business recovers the investment costs by the energy savings resulting from complementing existing energy facilities. The guaranteed parameters are Quantity of Heat Recovery, and Generator output drop. The results of the Performance Test show that the Quantity of Heat Recovery increased by 11.52 Gcal/h, and Generator output decreased by 0.234 MW, which satisfied the guarantee value.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.2064-2069
• /
• 2004

The main reason to analyze heat transfer in boiler inside through the performance test in fossil power plant is to increase plant high efficiency and energy saving movement in the government. Tins study intends to have trend and analyze the boiler heat transfer through the performance test, so it may give us the heat distribution in boiler inside in super-critical and sub-critica1 pressure type power plant

• 한국유체기계학회 논문집
• /
• 제16권5호
• /
• pp.11-17
• /
• 2013

This study is aimed to construct a marine small hydro power plant using discharge water of fish farm in Jeju Haengwon-ri. The difference of design methods between marine small hydro power plant and land small hydro power plant is to consider the tides. Moreover, ground condition should be examined because gushout sea water comes out from the ground at high tide in Jeju as the ground of Jeju beach consists of basalt stone. From the field test of the turbine generator after construction of the power plant, output power and efficiency of the turbine generator shows good conformance to the required conditions.

• 제어로봇시스템학회논문지
• /
• 제16권12호
• /
• pp.1189-1196
• /
• 2010

This paper provides an identification method for three-parameter models i.e. first order with dead time models and second order with dead time models. The proposed identification method is based on step response and can be easily implemented using digital microprocessors. The proposed method first identifies the order of the plant i.e. first order or second order from the behavior of the plant with constant input. After the order of the plant is determined, a test step input is applied to the system and the three parameters of the plant are obtained from the corresponding response of the plant. The output of the plant need not to be zero when the test signal is applied. The efficacy of proposed algorithms is verified through simulation and experiment.

• Natural Product Sciences
• /
• 제19권4호
• /
• pp.329-336
• /
• 2013

The purpose of this study is to evaluate cytoprotective effect of Korean medicinal plants on alcohol-induced cytotoxicity in liver cells. Out of the 120 plant extracts tested in this study, 53 plant extracts enhanced alcohol-induced cytotoxicity in liver cells by 50~80%, while other 11 plant extracts including Crataegus pinnatifida reduced cytotoxicity by 1~68%. The results of DPPH free radical test and LDL lipid peroxidation test on the plant extracts that sharply reduced cytotoxicity in liver cells shows that Crataegus pinnatifida and Cinnamomum cassia had antioxidative effect. This study reports that the plant extracts that enhance or reduce ethanol-induced cytotoxicity in liver cells can be research objects as cytotoxic plants or cytotoxicity-protective plants.

• 한국안전학회지
• /
• 제15권1호
• /
• pp.28-35
• /
• 2000

As huge energy transfer systems like a nuclear power plant, steam power plant and petrochemical plant are operated for a long time, mechanical properties are changed by degradation. The life time of the systems can be affected by the mechanical properties. So determination of the integrity of the metallic structure is required either to en4sure that failure will not occur during the service life of the components or to evaluate the lifetime extension of the structure. An automated ball indentation(ABI) method was developed as a non-destructive technique for evaluating the integrity of such metallic components. In this paper, we would like to present the aging evaluation technique by the ABI method. The five classes of the thermally aged CF8M specimens were prepared using an artificially accelerated aging method. After holding 100, 300, 900, 1800 and 3600 hours at 43$0^{\circ}C$, the specimens were cooled down using water to room temperature respectively. The tensile test, hardness test, charpy impact test, ABI test were performed. The results of the fracture test were compared with those of ABI test and the new evaluation technique of the integrity of metallic structures was developed.

• 한국육종학회지
• /
• 제42권4호
• /
• pp.397-406
• /
• 2010

멜론과 참외의 국내 소비 시장이 확대됨에 따라 다양한 $F_1$ 품종이 개발되고 있다. 멜론과 참외의 $F_1$ 품종의 순도를 검정하기 위해 포장재배 등의 순도검정법이 이용되고 있으나 시간과 노력이 매우 많이 소요되기 때문에 분자마커를 이용한 순도검정법의 개발이 필요하다. 본 연구에서는 멜론의 EST 염기정보로부터 30개의 SNP 프라이머 조합을 고안하여 멜론과 참외의 순도 검정을 위한 HRM분석방법을 개발하였다. 멜론 두 품종과 참외 한 품종의 양친 사이에 HRM 해리곡선의 다형성을 보이는 10개의 마커를 선발하였으며 순도검정 마커를 선발하기 위해 blind test를 실시하였다. Blind test와 HRM 유전형 분석 결과가 일치하였으며 MEL SNP 2번과 12 마커를 이용하여 '레드 퀸'과 '얼쓰 VIP'의 $F_1$ 501개 개체에 대해 순도검정을 실시하였다. HRM분석한 결과 모두 이형집합체로 나타나 100%의 순도를 보였다. 또한 HRM 방법을 이용하여 개발한 SNP 마커를 CAPS 마커로 전환하였다. CAPS 마커는 HRM 분석 마커와 비교하여 볼 때 멜론과 참외의 순도검정용 마커로 더 유용하게 활용될 수 있을 것으로 기대된다.

• 비파괴검사학회지
• /
• 제5권1호
• /
• pp.34-47
• /
• 1985

The developing country, KOREA where does not possess the natural resources for traditional energy such as oil and gas, so. The nuclear energy is the most single reliable source available for closing the energy gap. For these reason, It is inavoidable to construct the nuclear power plant and to develop technology related nuclear energy. The rate of operation in large nuclear power facilities depends upon the performance of work system through design and construction, and also the applied technology. Especially, it is the most important element that safety and reliability in operation of nuclear power plant. In view of this aspects, Nuclear power plant is performed severe examinations during preservice and inservice inspection. This study provide an automation of analysis for volumetric examination which is required to nuclear power plant components. It is composed as follows: I. Introduction II. Inservice Inspection of Nuclear Power Plant ${\ast}$ General Requirement. ${\ast}$ Principle and Methods of Ultrasonic Test. ${\ast}$ Study of Flaw Evaluation and Design of Classifying Formula for Flaws. III. Design of Automation for Flaw Evaluation. IV. An Example V. Conclusion In this theory, It is classifying the flaws, the formula of classifying flaws and the design of automation that is the main important point. As motioned the above, Owing to such as automatic design, more time could be allocated to practical test than that of evaluation of defects, Protecting against subjective bias tester by himself and miscalculation by dint of various process of computation. For the more, adopting this method would be used to more retaining for many test data and comparative evaluating during successive inspection intervals. Inspite of limitation for testing method and required application to test components, it provide useful application to flow evaluation for volumetric examination. Owing to the characteristics of nuclear power plant that is highly skill intensive industry and has huze system, the more notice should be concentrated as follows. Establishing rational operation plan, developing various technology, and making the newly designed system for undeveloped sector.

• 한국환경과학회지
• /
• 제20권9호
• /
• pp.1183-1190
• /
• 2011

This study was aimed to establish the evaluating protocol and standard assessment for genetically modified (GM) hot pepper and to find out a proper statistic method to analyze for equality of agricultural characters between GM and non-GM pepper lines. GM and non-GM hot pepper lines were cultivated in two GMO fields in the middle region of Korea and total of 52 agricultural characters were collected during the plant growing season for 4 years, 2007 to 2010. Levene's test was conducted to confirm the homogeneity of raw data before statistic analysis. Two-way ANOVA in the multivariate tests and t-test were conducted to analyze 52 agricultural characters in order to find out the equality between H15 and P2377. From the statistical analysis through two-way ANOVA, 16 out of 16 plant growth traits, 9 out of 18 green fruit traits and 7 out of 18 red fruit traits among 4 years and 9 out of 16 plant growth traits, 4 out of 18 green fruit traits and 3 out of 18 red fruit traits between H15 and P2377 have shown the statistic differences. With the same raw data of 52 agricultural characters, t-test was also conducted. Based on the result from t-test, only 1 out of 16 plant growth traits, 2 out of 18 green fruit traits and 1 out of 18 red fruit traits have shown the differences between H15 and P2377, so that it was concluded that there is no statistic difference between H15 and P2377 in terms of agricultural characters. Also, the t-test is a proper statistic method to analyze each trait between GM and its control lines in order to evaluate agricultural characters.

• 대한기계학회논문집A
• /
• 제35권6호
• /
• pp.683-691
• /
• 2011

원자력발전소 용 솔레노이드 밸브의 국산화에 필수 과정인 기기검증 기술을 개발하기 위해 관련 규정을 분석하고, 시험절차 및 방법, 시험조건, 시험장치 및 허용기준 등을 구체화하였다. 솔레노이드 밸브의 기기검증 규격은 법규, 가이드, 규정 등의 순으로 계층화되어 있으며, 시험기기와 시험항목에 따라 규정이 세분화되어 있다. 세부 규정인 IEEE를 분석한 결과 기기검증 시험은 크게 기능시험, 일반환경시험 및 사고시험으로 구분되어 있는데, 일반환경시험과 사고시험을 통해 발전소 환경과 동일한 조건에서 솔레노이드 밸브를 노화시킨 후 기능시험에서 노화된 밸브의 성능을 확인하는 방식으로 검증시험을 수행하도록 구성되어 있었다. 본 논문에서 제시한 솔레노이드 밸브의 기기검증 시험절차와 방법은 기기검증 수행자뿐만 아니라 밸브 제조사에게 매우 유용한 기술 자료가 될 것으로 판단된다.