• Journal of information and communication convergence engineering
• /
• v.3 no.1
• /
• pp.28-32
• /
• 2005

In this paper, we propose a novel test method to effectively detect hard and soft faults in CMOS 2-stage op-amps. The proposed method uses a very high frequency sinusoidal signal that exceeds unit gain bandwidth to maximize the fault effects. Since the proposed test method doesn't require any complex algorithms to generate the test pattern and uses only a single test pattern to detect all target faults, therefore test costs can be much reduced. The area overhead is also very small because the CUT is converted to a unit gain amplifier. Using HSPICE simulation, the results indicated a high degree of fault coverage for hard and soft faults in CMOS 2-stage op-amps. To verify this proposed method, we fabricated a CMOS op-amp that contained various short and open faults through the Hyundai 0.65-um 2-poly 2-metal CMOS process. Experimental results for the fabricated chip have shown that the proposed test method can effectively detect hard and soft faults in CMOS op-amps.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.1
• /
• pp.49-53
• /
• 2023

In this paper, we propose an antirandom pattern-based test method considering power consumption to compensate for the problem that the fault coverage through random test decreases or the test time increases significantly when the DUT circuit structure is complex or large. In the proposed method, a group unit test pattern generation process and rearrangement process are added to improve the problems of long calculation time and high-power consumption, which are disadvantages of the previous antirandom test.

• Journal of Oriental Neuropsychiatry
• /
• v.24 no.4
• /
• pp.331-342
• /
• 2013

Objectives: The purpose of this study is to examine the validity, the test-retest reliability and to provide guidelines for the Instrument on Pattern Identifications for Hwa-byung. Methods: Participants are 97 patients with Hwa-byung who were diagnosed by Hwa-Byung Diagnostic Interview Schedule. Participants were tested twice within one week. Results: The test-retest reliability of the Instrument on Pattern Identifications for Hwa-byung was examined for 97 patients and calculated to be 0.3146. The reliability of the Instrument on Pattern Identifications for Hwa-byung was 0.605 with a difference of 5% or more for the first and the second. To confirm the validity of the Instrument on Pattern Identifications for Hwa-byung, we analyzed the relevance between symptoms, Pattern Identifications that belong to the group and other Pattern Identifications that do not belong. Conclusions: It can be diagnosed in the first pattern identification by the Instrument of Pattern Identifications for Hwa-byung when there is a difference of 5% or more in the first and second pattern identification. Based on this result, we derived an Instrument for Pattern Identifications of Hwa-byung that has been further modified through additional studies.

• Fashion & Textile Research Journal
• /
• v.8 no.1
• /
• pp.99-106
• /
• 2006

With the growing interest in pet dogs and pet dog's wear I used this study to compare and analyze the pattern used by each supplier and developed a new pattern for pet dogs' wear which is appropriate for pet dogs' body lines and movement. Test subjects were 91 pet dogs in Busan and after comparing 3 patterns from different suppliers, I developed the pattern reflecting pet dogs' body shapes and movement. Results are as follows; 1) As a result of analyzing measurements, it was found that pet dogs motion in walking on four feet, is different from that of people on two feet. For center measurements, their waist to bust length is longer than their waist to back length. The result of analysis shows that bust circumference impacts most other measurement results and it seems that better results are achieved if the bust line is taken into consideration when measuring bust back length, bust front length, neck base circumference, front leg arc, the length between lateral shoulder etc. 2) As a result of comparing suppliers' patterns, it was discovered that each supplier has different sizes for the same patterns and those sizes are not standardized across the board. Even if the same size of pattern was actually used in the production of pet dogs' wear by the individual companies, there were many variations in size for each item. 3) To develop a more standard pattern of pet dogs' wear, I collected and analyzed 3 patterns from each supplier and designed a new pattern, revising it three times. After test-wearing of the experimental pattern and the studied patterns, and comparing and analyzing the results, the studied pattern had similarly better estimation than the experimental one.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.6
• /
• pp.821-832
• /
• 2002

The purpose of this study was to develop grading method of the basic brassiere patterns therewith, provide for 12 size's brassiere patterns and prove fitness of their's and shape. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. The basic sizes adopted at the first design stage (see fig.1-2) were 75AA, 75A and 75B each of which was designed as upper foundation basic pattern in reference to the cup size. At the second stage, each of the upper body foundation basic pattern was used to design lower cup, upper up, front panel and wing in their order(see fig.3-6). At the third stage, the other sizes were graded in reference to the three brassiere patterns (75AA, 75A and 75B) to produce 12 brassiere sizes(see Tab. 7-8). In order to develop the basic patterns of adult women's brassieres, 33 women were selected per 11 size combination(3 women per size combination), and then, their brassiere fitting was teated. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cup's bottom line or lower cup's top line, poor shape of upper cup's outside top line and shoulder strip position. On the other hand, on the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps'interval did not befit the ful1-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were addressed for the second teat. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. We were to present the final brassiere sizing system to extend the interior length of breast and the exterior length of breast on the basis of fitting test. Thereby, 75B$.$80A$.$80B$.$85A$.$85B's the interior lengths of breast were enlarged to 0.7cm, the rest size was enlarged to 0.5cm and the exterior length of breast was enlarged to 0.5cm regardless of sizes. 3. The upper foundation basic patterns of 75AA and 75B were presented and and the basic brassiere pattern and grading pattern were presented through to.

• The Research Journal of the Costume Culture
• /
• v.19 no.4
• /
• pp.674-696
• /
• 2011

Recent change in consumption patterns, casual clothing market share is growing. Awareness about the quality of the product for a variety of consumer needs are becoming. Accordingly, stretch material items that satisfy modern production and consumption is increasing. Among them, circular knit and woven fabrics with different characteristics have. However, this requires a consideration of the pattern graphics, this study is not getting enough. The purpose of this study is to develop a T-shirt using circular knit pattern for women in early twenties. Through the research of literature and a survey on T-shirt patterns of ready-to-wear manufactures and training for the pattern 4 T-shirt patterns were selected. Eight women in early twenties who fit the bodily standard were selected for the test. Subjects who were tested by wearing a T-shirt made of 30's cotton circular knit. Drafting method of T-shirt pattern which were closed to the optimum value three, derived from the five point rating scale outfit test were selected and the differences between the values of the selected drafting methods and the optimum three were verified. Passed by the test of 2 times and the final research T-shirt pattern was developed through adjusting from the optimum value three. The form which is whole is a silhouette closely in the body and drafting method the elasticity and drapery considered the quality of the circular knit where the characteristic is excellent.

• International Journal of Computer Science & Network Security
• /
• v.23 no.1
• /
• pp.103-111
• /
• 2023

Implementing conventional DFT solution for arrays of DNN accelerators having large number of processing elements (PEs), without considering architectural characteristics of PEs may incur overwhelming test overheads. Recent DFT based techniques have utilized the homogeneity and dataflow of arrays at PE-level and Core-level for obtaining reduction in; test pattern volume, test time, test power and ATPG runtime. This paper reviews these contemporary test solutions for ASIC based DNN accelerators. Mainly, the proposed test architectures, pattern application method with their objectives are reviewed. It is observed that exploitation of architectural characteristic such as homogeneity and dataflow of PEs/ arrays results in reduced test overheads.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.34 no.1
• /
• pp.30-36
• /
• 2020

This study aimed to investigate heart rate variability (HRV) characteristics of cold pattern with repeated measurement data. Participants were taken from a Daejeon University cohort study from 2015 to 2018. Forty-seven of the participants studied displayed cold pattern while 23 showed signs of non-cold pattern. HRV was measured in supine position for 5 minutes at each year, and an 8-item cold pattern questionnaire was used for the diagnosis of cold pattern. SDNN (standard deviation of the NN intervals) and RMSSD (the square root of the mean squared differences of successive NN intervals) were used as time domain analysis, and TP (total power), VLF (power in very low frequency range), LF (power in low frequency range), HF (power in high frequency range), LF norm (LF power in normalized units), HF norm (HF power in normalized units) and LF/HF were used as frequency domain analysis. In the Mann-Whitney U test, LF norm, HF norm, and LF/HF showed differences between the cold pattern group and non-cold pattern group at every measurement, and in the independent t-test, the differences were also observed at three points except for the baseline (2015). In the repeated measures ANOVA, the interaction effects were not observed in all HRV parameters, but the time period effects were observed in SDNN, RMSSD, TP, VLF, LF and HF. There were significant differences between those two groups in LF norm, HF norm and LF/HF. This study suggests that LF norm, HF norm and LF/HF might be a useful indicator of cold pattern properties.

• The Journal of the Korea Contents Association
• /
• v.7 no.1
• /
• pp.65-72
• /
• 2007

In this study, we used nondestructive test based on ultrasonic test as inspection method and compared backpropagation neural network(BPNN) with probabilistic neural network(PNN) as pattern recognition algorithm of weld flaws. For this purpose, variables are applied the same to two algorithms. Where, feature variables are zooming flaw signals of reflected whole signals from weld flaws in time domain. Through this process, we compared advantages/ disadvantages of two algorithms and confirmed application methods of two algorithms.

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.113-116
• /
• 2003

BiCMOS circuit consist of CMOS part which constructs logic function, and bipolar part which drives output load. In this paper, proposes a method for efficiently generating test pattern which detect faults in BiCMOS circuits. In proposed method, BiCMOS circuit is divided into pull-up part and pull-down part, using structural property of BiCMOS circuit, and we generate test pattern using set theory for efficiently detecting faults which occured each divided blocks.